Characteristics of a ZnTiO and ITO cathode-integrated electrodes for inverted organic solar cells

We investigated the characteristics of TiO2 and ZnO co-sputtered ZnTiO (ZTO) buffer layer for use in inverted organic solar cell (IOSCs). The 40 nm-thick ZTO buffer layer deposited on a crystalline ITO cathode showed different device performances depending on the RF and DC powers applied on the TiO2 and ZnO targets, respectively. Compared to IOSCs with a TiO2-rich ZTO buffer layer, the IOSCs with a ZnO-rich ZTO buffer layer showed better performances due to their higher optical transmittances and well-matched work function. At the optimized power ratio of ZnO:TiO2 (70:30%), the ZTO buffer layer exhibited an optical transmittance of 78% at a wavelength of 550 nm. The IOSCs with the optimized ZTO buffer layer exhibited a good cell-performance with a fill factor of 52.05%, a short circuit current of 8.81 mA/cm2, an open circuit voltage of 0.66 V, and a power conversion efficiency of 3.03%, which are comparable to IOSCs containing a conventional sol–gel processed ZnO buffer layer. Furthermore, the microstructure and interface structure for the IOSC with the ZTO buffer layer and ITO cathode-integrated electrode was investigated in detail using high resolution transmission electron microscopy.

[1]  F. Krebs.  Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .

[2]  M.J.A. de Voigt,et al.  Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes , 2000 .

[3]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[4]  Yong Cao,et al.  Polymer solar cells: Recent development and possible routes for improvement in the performance , 2010 .

[5]  Christoph J. Brabec,et al.  Organic tandem solar cells: A review , 2009 .

[6]  C. Adachi,et al.  Efficient Electron Injection Mechanism in Organic Light-Emitting Diodes Using an Ultra Thin Layer of Low-Work-Function Metals , 2003 .

[7]  Luping Yu,et al.  Overcoming efficiency challenges in organic solar cells: rational development of conjugated polymers , 2012 .

[8]  Christoph J. Brabec,et al.  Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact , 2006 .

[9]  Dongge Ma,et al.  The role of molybdenum oxide as anode interfacial modification in the improvement of efficiency and stability in organic light-emitting diodes , 2008 .

[10]  Yang Yang,et al.  A polymer tandem solar cell with 10.6% power conversion efficiency , 2013, Nature Communications.

[11]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[12]  Han‐Ki Kim,et al.  Indium-free, acid-resistant anatase Nb-doped TiO2 electrodes activated by rapid-thermal annealing for cost-effective organic photovoltaics , 2011 .

[13]  Tae-Hoon Yoon,et al.  Bulk and interface properties of molybdenum trioxide-doped hole transporting layer in organic light-emitting diodes , 2008 .

[14]  Vishal Shrotriya,et al.  Transition metal oxides as the buffer layer for polymer photovoltaic cells , 2006 .

[15]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[16]  Ole Hagemann,et al.  All solution processed tandem polymer solar cells based on thermocleavable materials , 2008 .

[17]  Pei-Jung Li,et al.  Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer. , 2010, Journal of the American Chemical Society.

[18]  Alex K.-Y. Jen,et al.  Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer , 2008 .

[19]  Mikkel Jørgensen,et al.  Upscaling of polymer solar cell fabrication using full roll-to-roll processing. , 2010, Nanoscale.

[20]  T. Yoon,et al.  Hybrid inverted bulk heterojunction solar cells with nanoimprinted TiO2 nanopores , 2009 .

[21]  Ching-Fuh Lin,et al.  Lengthening the polymer solidification time to improve the performance of polymer/ZnO nanorod hybrid solar cells , 2009 .

[22]  F. Krebs,et al.  A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies , 2009 .

[23]  Jin Jang,et al.  Highly efficient inverted poly(3-hexylthiophene): Methano-fullerene [6,6]-phenyl C71-butyric acid methyl ester bulk heterojunction solar cell with Cs2CO3 and MoO3 , 2011 .

[24]  Takayuki Kuwabara,et al.  Highly durable inverted-type organic solar cell using amorphous titanium oxide as electron collection electrode inserted between ITO and organic layer , 2008 .

[25]  Roar R. Søndergaard,et al.  Advanced materials and processes for polymer solar cell devices , 2010 .

[26]  A. Watanabe,et al.  Effect of atmospheres on the open-circuit photovoltage of nanoporous TiO2/poly(3-hexylthiophene) heterojunction solar cell , 2005 .

[27]  Takayuki Kuwabara,et al.  Inverted bulk-heterojunction organic solar cell using chemical bath deposited titanium oxide as electron collection layer , 2010 .

[28]  Jean-Michel Nunzi,et al.  Development of air stable polymer solar cells using an inverted gold on top anode structure , 2005 .

[29]  F. Krebs,et al.  Low band gap polymers for organic photovoltaics , 2007 .

[30]  Tsung-Hsun Lee,et al.  An inverted polymer photovoltaic cell with increased air stability obtained by employing novel hole/electron collecting layers , 2009 .

[31]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[32]  X. W. Sun,et al.  Efficient charge collection with sol–gel derived colloidal ZnO thin film in photovoltaic devices , 2009 .

[33]  B. Reeja‐Jayan,et al.  Influence of polymer–metal interface on the photovoltaic properties and long-term stability of nc-TiO2-P3HT hybrid solar cells , 2010 .