Physicochemical and thermomechanical performances study for Timahdite sheep wool fibers application in the building's insulation

[1]  Khalid Ibaaz,et al.  Improvement of thermomechanical properties of porous plaster reinforced with a network of Morocco sheep wool skeletons for Energy efficiency , 2023, Building and Environment.

[2]  A. Khabbazi,et al.  Study of the thermal and mechanical properties of local clay materials activated with quicklime, Sefrou (Morocco) , 2022, Materials Today: Proceedings.

[3]  L. Jankovič,et al.  Near-IR study of the impact of alkyl-ammonium and -phosphonium cations on the hydration of montmorillonite , 2022, Journal of Molecular Structure.

[4]  M. Cherkaoui,et al.  Improvement of thermomechanical characteristics of multilayer biomaterial of sheep wool and clay , 2022, Materials Today: Proceedings.

[5]  L. Savio,et al.  Natural Fibre Insulation Materials: Use of Textile and Agri-food Waste in a Circular Economy Perspective , 2022, Materials Circular Economy.

[6]  I. Rocchi,et al.  New method for a SEM-based quantitative microstructural clay analysis - MiCA , 2021, Applied Clay Science.

[7]  S. Mounir,et al.  Effect of artificial porosity on the thermal behavior and the lightness of an eco-friendly building material based on clay and granular cork , 2021 .

[8]  J. Das,et al.  Layered silicate formation during chiral acid templated ZSM-5 synthesis , 2021 .

[9]  A. Khabbazi,et al.  Compressive strength optimization of metakaolin‐based geopolymer by central composite design , 2021 .

[10]  Yuanyuan Yu,et al.  A controlled, highly effective and sustainable approach to the surface performance improvement of wool fibers , 2021 .

[11]  Gang Tang,et al.  Application of Ce–Eu/TiO2 phase change material as the wall material to improve the indoor environment , 2021, Journal of Materials Research.

[12]  M. El Qandil,et al.  A new approach for the mandatory application of the thermal regulation of construction (RTCM) in the future moroccan buildings , 2020, SN Applied Sciences.

[13]  Adelaja Israel Osofero,et al.  Critical review of recent development in fiber reinforced adobe bricks for sustainable construction , 2020, Frontiers of Structural and Civil Engineering.

[14]  D. Štreimikienė,et al.  Uncertain multi-criteria sustainability assessment of green building insulation materials , 2020 .

[15]  E. C. Abdullah,et al.  Adsorption of Cu(II) and Ni(II) ions from wastewater onto bentonite and bentonite/GO composite , 2020, Environmental Science and Pollution Research.

[16]  Emeso B. Ojo,et al.  Mechanical performance of fiber-reinforced alkali activated un-calcined earth-based composites , 2020, Construction and Building Materials.

[17]  Y. Danyuo,et al.  Mechanical Characterization of Earth-Based Composites Materials Reinforced with Treated Bamboo Fibres for Affordable Housing , 2020, MRS Advances.

[18]  M. Garoum,et al.  Thermal study of clay bricks reinforced by sisal-fibers used in construction in south of Morocco , 2020 .

[19]  I. Leito,et al.  Reflectance FT-IR spectroscopy as a viable option for textile fiber identification , 2019, Heritage Science.

[20]  M. P. Morales,et al.  Thermal and mechanical properties of fired clay bricks made by using grapevine shoots as pore forming agent. Influence of particle size and percentage of replacement , 2019, Construction and Building Materials.

[21]  Changsheng Peng,et al.  Fabrication of a low-cost adsorbent supported zero-valent iron by using red mud for removing Pb(ii) and Cr(vi) from aqueous solutions , 2019, RSC advances.

[22]  L. Jankovič,et al.  Structural characterization of organo-montmorillonites prepared from a series of primary alkylamines salts: Mid-IR and near-IR study , 2019, Applied Clay Science.

[23]  Mostafa R. Abukhadra,et al.  Facile conversion of kaolinite into clay nanotubes (KNTs) of enhanced adsorption properties for toxic heavy metals (Zn2+, Cd2+, Pb2+, and Cr6+) from water. , 2019, Journal of hazardous materials.

[24]  A. Top,et al.  Self-assembly behavior of the keratose proteins extracted from oxidized Ovis aries wool fibers. , 2019, International journal of biological macromolecules.

[25]  Soumia Mounir,et al.  Energy efficiency and impact carbon of a multilayer material composed of ecological additives. , 2019, Energy Procedia.

[26]  M. M. Barbero-Barrera,et al.  Assessment of the mechanical performance of three varieties of pine needles as natural reinforcement of adobe , 2018, Construction and Building Materials.

[27]  M. Garoum,et al.  Energy performance and thermal proprieties of three types of unfired clay bricks , 2018 .

[28]  Gurumurthy Br.  Application of Scanning Electron Microscopy and Fourier-Transform Infrared Spectroscopy to Study Surface Design and Chemical Group Components of Merino Wool, Paschmina and Angora Fibers , 2018 .

[29]  H. Oliveira,et al.  Removal of Cr(VI) from Aqueous Solutions Using Clay from Calumbi Geological Formation, N. Sra. Socorro, SE State, Brazil , 2018 .

[30]  M. Garoum,et al.  Energy Efficiency and Thermal Properties of the Composite Material Clay-straw , 2017 .

[31]  B. Samet,et al.  Acid based geopolymerization kinetics: Effect of clay particle size , 2016 .

[32]  Francesco Bianchi,et al.  Insulation materials for the building sector: A review and comparative analysis , 2016 .

[33]  L. C. Bertolino,et al.  (Caracterização de argilas bentoníticas de Cubati, Paraíba - nordeste do Brasil) , 2016 .

[34]  Li Rong,et al.  Extracting keratin from wool by using L-cysteine , 2016 .

[35]  Zoubeir Lafhaj,et al.  Thermal performance of unfired clay bricks used in construction in the north of France: Case study , 2015 .

[36]  M. B. Ogundiran,et al.  The potential of binary blended geopolymer binder containing Ijero-Ekiti calcined kaolin clay and ground waste window glass , 2015 .

[37]  Antonio García-Martínez,et al.  Embodied energy of conventional load-bearing walls versus natural stabilized earth blocks , 2015 .

[38]  S. Bahrami,et al.  Modification of wool fabric using prepared chitosan-cyanuric chloride hybrid , 2015 .

[39]  Abdelhamid Khabbazi,et al.  Experimental thermal properties characterization of insulating cork–gypsum composite , 2014 .

[40]  Hui Zhang,et al.  Functional Modification with TiO2 Nanoparticles and Simultaneously Dyeing of Wool Fibers in a One-Pot Hydrothermal Process , 2014 .

[41]  Azra Korjenic,et al.  Performance evaluation and research of alternative thermal insulations based on sheep wool , 2012 .

[42]  Caroline Bertagnolli,et al.  Characterization of Brazilian Bentonite Organoclays as sorbents of petroleum-derived fuels , 2012 .

[43]  A. Djafri,et al.  Adsorption of phenol on natural clay , 2012, Applied Water Science.

[44]  J. Gerring.  A case study , 2011, Technology and Society.

[45]  A. Degiovanni,et al.  A centered hot plate method for measurement of thermal properties of thin insulating materials , 2010 .

[46]  Ángel Palomo,et al.  Alkali activation of fly ash: Effect of the SiO2/Na2O ratio Part I: FTIR study , 2007 .

[47]  J. Batsale,et al.  Mesure de la diffusivité longitudinale de matériaux anisotropes , 1996 .

[48]  A. Hegyi,et al.  Sheep Wool Thermal Insulating Mattresses Behaviour in the Water Vapours Presence , 2020 .

[49]  D. Manea,et al.  Utilization of Sheep Wool as a Building Material , 2019, Procedia Manufacturing.

[50]  N. Laaroussi,et al.  Thermal study of clay bricks reinforced by three ecological materials in south of morocco , 2019, Energy Procedia.

[51]  M. Cherkaoui,et al.  Thermophysical study of a multi-layer brick of grids made of sheep’s wool yarn and clay , 2019, XIAMEN-CUSTIPEN WORKSHOP ON THE EQUATION OF STATE OF DENSE NEUTRON-RICH MATTER IN THE ERA OF GRAVITATIONAL WAVE ASTRONOMY.

[52]  M. Kabbaj,et al.  Valorization of natural clay from agadir (Morocco): Characterization and study of the isotherms adsorption of methylene blue , 2014 .

[53]  Karen Scrivener,et al.  The origin of the pozzolanic activity of calcined clay minerals: A comparison between kaolinite, illite and montmorillonite , 2011 .