Research on constitutive models and hot workability of as-homogenized Al-Zn-Mg-Cu alloy during isothermal compression

[1]  Y. Lin,et al.  EBSD analysis of evolution of dynamic recrystallization grains and δ phase in a nickel-based superalloy during hot compressive deformation , 2016 .

[2]  Yu-tao Zhao,et al.  Hot deformation behavior and optimization of processing parameters of a typical high-strength Al–Mg–Si alloy , 2016 .

[3]  Z. Nie,et al.  Hot deformation behavior and constitutive equation of a new type Al–Zn–Mg–Er–Zr alloy during isothermal compression , 2016 .

[4]  Jin-feng Li,et al.  Dynamic restoration mechanism and physically based constitutive model of 2050 Al–Li alloy during hot compression , 2015 .

[5]  L. Zhuang,et al.  Characterization of hot workability in AA 7050 aluminum alloy using activation energy and 3-D processing map , 2015 .

[6]  Xingtao Liu,et al.  Hot deformation behavior and microstructural evolution of as-homogenized Al–6Mg–0.4Mn–0.25Sc–0.1Zr alloy during compression at elevated temperature , 2015 .

[7]  Lei Li,et al.  A physical-based constitutive relation to predict flow stress for Cu–0.4Mg alloy during hot working , 2014 .

[8]  Z. Yin,et al.  Characterization of hot deformation behavior of as-homogenized Al–Cu–Li–Sc–Zr alloy using processing maps , 2014 .

[9]  X. Chen,et al.  Effect of vanadium on hot deformation and microstructural evolution of 7150 aluminum alloy , 2014 .

[10]  Yun-lai Deng,et al.  Constitutive equation and hot deformation behavior of homogenized Al–7.68Zn–2.12Mg–1.98Cu–0.12Zr alloy during compression at elevated temperature , 2014 .

[11]  Qing Liu,et al.  Hot deformation behavior of AA7085 aluminum alloy during isothermal compression at elevated temperature , 2014 .

[12]  M. Fu,et al.  Hot deformation behavior and hot working characteristic of Nickel-base electron beam weldments , 2014 .

[13]  S. Abbasi,et al.  On the constitutive modeling and microstructural evolution of hot compressed A286 iron-base superalloy , 2013 .

[14]  W. Mao,et al.  Evolution of activation energy during hot deformation of AA7150 aluminum alloy , 2013 .

[15]  Y. C. Lin,et al.  Hot deformation and processing map of a typical Al–Zn–Mg–Cu alloy , 2013 .

[16]  S. Suwas,et al.  The influence of temperature and strain rate on the deformation response and microstructural evolution during hot compression of a titanium alloy Ti–6Al–4V–0.1B , 2013 .

[17]  Mohammad Habibi Parsa,et al.  Constitutive equations for elevated temperature flow behavior of commercial purity aluminum , 2012 .

[18]  V. Senthilkumar,et al.  Analysis of hot deformation behavior of Al 5083–TiC nanocomposite using constitutive and dynamic material models , 2012 .

[19]  J. Torralba,et al.  Hot deformation behaviour and flow stress prediction of 7075 aluminium alloy powder compacts during compression at elevated temperatures , 2012 .

[20]  J. Jonas,et al.  A new approach to modeling the flow curve of hot deformed austenite , 2011 .

[21]  Y. Lin,et al.  A critical review of experimental results and constitutive descriptions for metals and alloys in hot working , 2011 .

[22]  Q. Pan,et al.  Artificial neural network prediction to the hot compressive deformation behavior of Al–Cu–Mg–Ag heat-resistant aluminum alloy , 2011 .

[23]  Xiaopeng Liang,et al.  Hot deformation and processing map of 2519A aluminum alloy , 2011 .

[24]  Z. Yin,et al.  Hot deformation behavior and microstructural evolution of homogenized 7050 aluminum alloy during compression at elevated temperature , 2011 .

[25]  S. Ramanathan,et al.  Hot deformation behaviour of 7075 alloy , 2011 .

[26]  Fuguo Li,et al.  Prediction of the hot deformation behavior for Aermet100 steel using an artificial neural network , 2010 .

[27]  Min Song,et al.  Hot deformation behavior and microstructural evolution of Ag-containing 2519 aluminum alloy , 2010 .

[28]  Mehrdad Aghaie-Khafri,et al.  Hot deformation of 15-5 PH stainless steel , 2010 .

[29]  Z. Nie,et al.  Hot deformation and processing maps of an Al–5.7 wt.%Mg alloy with erbium , 2009 .

[30]  K. V. Kasiviswanathan,et al.  Constitutive equations to predict high temperature flow stress in a Ti-modified austenitic stainless steel , 2009 .

[31]  Y. Prasad,et al.  Hot deformation behaviour of as-cast Mg–2Zn–1Mn alloy in compression: a study with processing map , 2003 .

[32]  E. A. Starke,et al.  Progress in structural materials for aerospace systems , 2003 .

[33]  Filippo Gabrielli,et al.  Hot workability and models for flow stress of NIMONIC 115 Ni-base superalloy , 2002 .

[34]  John J. Jonas,et al.  A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization , 1996 .

[35]  J. T. Staley,et al.  Application of modern aluminum alloys to aircraft , 1996 .