Microstructure and performances of dissimilar joints between 12Cr2Mo1R steel and 06Cr18Ni11Ti austenitic stainless steel joined by AA-TIG welding

[1]  Yifu Shen,et al.  Effects of beam offset on the macro defects, microstructure and mechanical behaviors in dissimilar laser beam welds of SDSS2507 and Q235 , 2020 .

[2]  Xiong Zhang,et al.  Microstructure and performance of hybrid laser-arc welded high-strength low alloy steel and austenitic stainless steel dissimilar joint , 2020 .

[3]  Xian-ming Wang,et al.  Superhydrophobic surface with lotus/petal effect and its improvement on fatigue resistance of heat-resistant steel , 2019 .

[4]  D. K. Dwivedi,et al.  Dissimilar metal welding of P91 steel-AISI 316L SS with Incoloy 800 and Inconel 600 interlayers by using activated TIG welding process and its effect on the microstructure and mechanical properties , 2019 .

[5]  M. Shamanian,et al.  Microstructure and mechanical characterization of Incoloy 825 Ni-based alloy welded to 2507 super duplex stainless steel through dissimilar friction stir welding , 2019, Transactions of Nonferrous Metals Society of China.

[6]  D. K. Dwivedi,et al.  A-TIG welding of dissimilar P92 steel and 304H austenitic stainless steel: Mechanisms, microstructure and mechanical properties , 2019, Journal of Manufacturing Processes.

[7]  Liwei Wang,et al.  Effect of delta ferrites on the anisotropy of impact toughness in martensitic heat-resistant steel , 2019, Journal of Materials Research and Technology.

[8]  R. Basu,et al.  Investigation on the microstructure—mechanical property correlation in dissimilar steel welds of stainless steel SS 304 and medium carbon steel EN 8 , 2018, Journal of Manufacturing Processes.

[9]  Behnam Sadeghi,et al.  Effects of post weld heat treatment on residual stress and mechanical properties of GTAW: The case of joining A537CL1 pressure vessel steel and A321 austenitic stainless steel , 2018, Engineering Failure Analysis.

[10]  D. K. Dwivedi,et al.  Study of mechanism, microstructure and mechanical properties of activated flux TIG welded P91 Steel-P22 steel dissimilar metal joint , 2018, Materials Science and Engineering: A.

[11]  D. K. Dwivedi,et al.  Microstructural and mechanical properties assessment of the P91 A-TIG weld joints , 2018 .

[12]  G. Nandi,et al.  GMAW dissimilar welding of AISI 409 ferritic stainless steel to AISI 316L austenitic stainless steel by using AISI 308 filler wire , 2017 .

[13]  D. K. Dwivedi,et al.  Study of microstructure and mechanical property relationships of A-TIG welded P91–316L dissimilar steel joint , 2017 .

[14]  M. Shamanian,et al.  Mechanical and microstructural evaluation of SAF 2507 and incoloy 825 dissimilar welds , 2017 .

[15]  S. Ghorbani,et al.  Effect of post weld heat treatment (PWHT) on the microstructure, mechanical properties, and corrosion resistance of dissimilar stainless steels , 2017 .

[16]  Jagesvar Verma,et al.  Dissimilar welding behavior of 22% Cr series stainless steel with 316L and its corrosion resistance in modified aggressive environment , 2016 .

[17]  I. Danaee,et al.  Microstructure and Corrosion Resistance of Dissimilar Weld-Joints between Duplex Stainless Steel 2205 and Austenitic Stainless Steel 316L , 2016 .

[18]  V. Badheka,et al.  Experimental investigation on mechanism and weld morphology of activated TIG welded bead-on-plate weldments of reduced activation ferritic/martensitic steel using oxide fluxes , 2015 .

[19]  Prabhat Kumar,et al.  An Overview of Welding Aspects and Challenges during Manufacture of Intermediate Heat Exchangers for 500mwe Prototype Fast Breeder Reactor , 2014 .

[20]  W. Chuaiphan,et al.  Dissimilar Welding between AISI 304 Stainless Steel and AISI 1020 Carbon Steel Plates , 2012 .

[21]  K. Senthilkumaran,et al.  Hot Corrosion Behavior of Friction Welded AISI 4140 and AISI 304 in K2SO–60% NaCl Mixture , 2012 .

[22]  A. Scotti,et al.  Models to describe Plasma Jet, Arc Trajectory and arc blow formation in arc welding , 2011 .

[23]  Gerhard Inden,et al.  Design of martensitic/ferritic heat-resistant steels for application at 650 °C with supporting thermodynamic modelling , 2008 .

[24]  Leonard L. Vasiliev,et al.  Heat pipes in modern heat exchangers , 2005 .

[25]  T. Byun,et al.  Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels , 2004 .

[26]  M. Bojinov,et al.  A mixed-conduction model for oxide films on Fe, Cr and Fe–Cr alloys in high-temperature aqueous electrolytes—II. Adaptation and justification of the model , 2002 .

[27]  M. Bojinov,et al.  A mixed-conduction model for oxide films on Fe, Cr and Fe–Cr alloys in high-temperature aqueous electrolytes––I. Comparison of the electrochemical behaviour at room temperature and at 200 °C , 2002 .

[28]  Weishan Li,et al.  Electric properties and pitting susceptibility of passive films formed on iron in chromate solution , 1999 .

[29]  A. E. Fedoseev,et al.  Mechanical properties and microstructure of advanced ferritic–martensitic steels used under high dose neutron irradiation , 1999 .

[30]  M. L. Huang,et al.  Carbon migration in 5Cr-0.5Mo/21Cr-12Ni dissimilar metal welds , 1998 .

[31]  S. Albert,et al.  Soft zone formation in dissimilar welds between two Cr-Mo steels , 1997 .

[32]  R. M. Boothby,et al.  Solidification and transformation behaviour of niobium-Stabilized austenitic stainless steel weld metal , 1986 .

[33]  N. Suutala.  Effect of solidification conditions on the solidification mode in austenitic stainless steels , 1983 .