Additive Manufacturing and Performance of Functional Hydraulic Pump Impellers in Fused Deposition Modeling Technology

Would it be possible for an additively manufactured impeller of fused deposition modeling (FDM) technology to have a functional behavior and a similar performance to that of the original impeller of a close-coupled centrifugal pump? In this research paper, different tests are conducted to answer this question and to evaluate the manufacturing process of FDM functional parts. Three performance experiments with the same centrifugal pump, using an open test rig, are carried out and compared, first using the original impeller provided by the manufacturer of the pump, second using an FDM replication of the original one without post-treatment, and third using a chemically dimethyl ketone post-treated FDM replication. The results obtained in the tests demonstrate the functional behavior of both additive FDM impellers in comparison with the one fabricated by means of conventional technology (subtractive manufacturing). Additionally, analogous head-flow curves (and also with an improved performance to the one of the original impeller) are obtained. This research paper introduces significant information concerning a low-cost and low-time manufacturing process of additive functional parts. Moreover, new results are presented regarding the performance of chemically post-treated FDM parts working in functional applications. FDM impellers of high complexity and quality, which meet performance criteria, can be achieved.

[1]  Jianfeng Li,et al.  Review on stress corrosion and corrosion fatigue failure of centrifugal compressor impeller , 2015 .

[2]  Yucheng Ding,et al.  Price quotation methodology for stereolithography parts based on STL model , 2007, Comput. Ind. Eng..

[3]  W K Chan,et al.  Rapid manufacturing techniques in the development of an axial blood pump impeller , 2003, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[4]  Verney Evans,et al.  Plastics as corrosion-resistant materials , 1966 .

[5]  Ashok Naimpally,et al.  Environmental Engineering: Review for the Professional Engineering Examination , 2013 .

[6]  Selçuk Güçeri,et al.  Mechanical characterization of parts fabricated using fused deposition modeling , 2003 .

[7]  J. Gülich,et al.  Effect of Reynolds Number and Surface Roughness on the Efficiency of Centrifugal Pumps , 2003 .

[8]  S. L. Dixon,et al.  Fluid mechanics, thermodynamics of turbomachinery , 1966 .

[9]  Luigi Maria Galantucci,et al.  Experimental study aiming to enhance the surface finish of fused deposition modeled parts , 2009 .

[10]  A. Thakker,et al.  Innovative manufacture of impulse turbine blades for wave energy power conversion , 2002 .

[11]  P. Wright,et al.  Anisotropic material properties of fused deposition modeling ABS , 2002 .

[12]  V. V. Burenin,et al.  Use of plastics in centrifugal pump constructions , 1981 .

[13]  Luigi Maria Galantucci,et al.  Quantitative analysis of a chemical treatment to reduce roughness of parts fabricated using fused deposition modeling , 2010 .

[14]  Robert R. Ross,et al.  Centrifugal Pumps: Design and Application , 1985 .

[15]  F. A. Varley.  Effects of Impeller Design and Surface Roughness on the Performance of Centrifugal Pumps , 1961 .

[16]  Han Tong Loh,et al.  Toward generic models for comparative evaluation and process selection in rapid prototyping and manufacturing , 2001 .

[17]  Syed H. Masood,et al.  A rule based expert system for rapid prototyping system selection , 2002 .

[18]  Christopher B. Williams,et al.  Design and manufacture of a Formula SAE intake system using fused deposition modeling and fiber‐reinforced composite materials , 2010 .

[19]  Carlos Henrique Pereira Mello,et al.  Systematic proposal to calculate price of prototypes manufactured through rapid prototyping an FDM 3D printer in a university lab , 2010 .

[20]  Feng Lin,et al.  Rapid prototyping and manufacturing technology: Principle, representative technics, applications, and development trends , 2009 .

[21]  Thomas Scanlon,et al.  Development of a regenerative pump impeller using rapid manufacturing techniques , 2010 .