Ambient- and elevated-temperature strengthening by Al3Zr-Nanoprecipitates and Al3Ni-Microfibers in a cast Al-2.9Ni-0.11Zr-0.02Si-0.005Er (at.%) alloy
暂无分享,去创建一个
[1] D. Dunand,et al. Strengthening mechanisms in Al Ni Sc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates , 2019, Acta Materialia.
[2] D. Seidman,et al. Effect of Si micro-addition on creep resistance of a dilute Al-Sc-Zr-Er alloy , 2018, Materials Science & Engineering: A.
[3] S. Kumar,et al. Improvement of high temperature strength of 2219 alloy by Sc and Zr addition through a novel three-stage heat treatment route , 2018, Materials Science and Engineering: A.
[4] D. Seidman,et al. Microstructure and mechanical properties of a precipitation-strengthened Al-Zr-Sc-Er-Si alloy with a very small Sc content , 2018 .
[5] U. Patakham,et al. New generation of eutectic Al-Ni casting alloys for elevated temperature services , 2018 .
[6] H. Huang,et al. Effect of Trace Element Hf on the Precipitation Process and Recrystallization Resistance of Al-Er-Zr Alloys , 2017 .
[7] A. Alabin,et al. Effect of Annealing on the Electrical Resistivity and Strengthening of Low-Alloy Alloys of the Al – Zr – Si System , 2017, Metal Science and Heat Treatment.
[8] D. Seidman,et al. Role of silicon in the precipitation kinetics of dilute Al-Sc-Er-Zr alloys , 2016 .
[9] Z. Nie,et al. New Progress on Er-Containing Micro-Alloying Aluminum Alloys , 2016 .
[10] D. Seidman,et al. Mechanical properties and optimization of the aging of a dilute Al-Sc-Er-Zr-Si alloy with a high Zr/Sc ratio , 2016 .
[11] M. Makhlouf,et al. Alternatives to the Al–Si Eutectic System in Aluminum Casting Alloys , 2016, International Journal of Metalcasting.
[12] Yangyang Fan,et al. The effect of introducing the Al-Ni eutectic composition into Al-Zr-V alloys on microstructure and tensile properties , 2016 .
[13] Yangyang Fan,et al. Precipitation Strengthening in Al-Ni-Mn Alloys , 2015, Metallurgical and Materials Transactions A.
[14] Z. Nie,et al. A study of precipitation strengthening and recrystallization behavior in dilute Al–Er–Hf–Zr alloys , 2015 .
[15] Z. Nie,et al. The study on the coarsening process and precipitation strengthening of Al3Er precipitate in Al–Er binary alloy , 2014 .
[16] Z. Nie,et al. Role of Yb and Si on the precipitation hardening and recrystallization of dilute Al–Zr alloys , 2014 .
[17] D. Seidman,et al. Improving aging and creep resistance in a dilute Al–Sc alloy by microalloying with Si, Zr and Er , 2014 .
[18] Wei Wang,et al. Precipitation evolution in Al–Er–Zr alloys during aging at elevated temperature , 2013 .
[19] C. Wolverton,et al. Role of silicon in accelerating the nucleation of Al3(Sc,Zr) precipitates in dilute Al–Sc–Zr alloys , 2012 .
[20] Li Hongying,et al. Precipitation evolution and coarsening resistance at 400 °C of Al microalloyed with Zr and Er , 2012 .
[21] D. Seidman,et al. Effect of Er additions on ambient and high-temperature strength of precipitation-strengthened Al-Zr-Sc-Si alloys , 2012 .
[22] Z. Nie,et al. Synergetic effect of Er and Zr on the precipitation hardening of Al–Er–Zr alloy , 2011 .
[23] David C. Dunand,et al. Coarsening resistance at 400 °C of precipitation-strengthened Al–Zr–Sc–Er alloys , 2011 .
[24] David C. Dunand,et al. Modeling the creep threshold stress due to climb of a dislocation in the stress field of a misfitting precipitate , 2011 .
[25] D. Seidman,et al. Ambient- and high-temperature mechanical properties of isochronally aged Al-0.06Sc, Al-0.06Zr and Al-0.06Sc-0.06Zr (at.%) alloys , 2011 .
[26] D. Seidman,et al. Precipitation evolution in Al–0.1Sc, Al–0.1Zr and Al–0.1Sc–0.1Zr (at.%) alloys during isochronal aging , 2010 .
[27] D. Seidman,et al. Roles of impurities on precipitation kinetics of dilute Al-Sc alloys , 2010 .
[28] William A. Curtin,et al. Scaling of Dislocation Strengthening by Multiple Obstacle Types , 2010 .
[29] N. Žaludová,et al. Phase transformations in isochronally annealed mould-cast and cold-rolled Al–Sc–Zr-based alloy , 2010 .
[30] F. Samuel,et al. Precipitation-hardening in cast AL–Si–Cu–Mg alloys , 2010, Journal of Materials Science.
[31] B. Mondal,et al. Microstructural investigations on as-cast and annealed Al―Sc and Al―Sc―Zr alloys , 2009 .
[32] K. Marthinsen,et al. Precipitation kinetic of Al3(Sc,Zr) dispersoids in aluminium , 2009 .
[33] D. Dunand,et al. Creep resistance of cast and aged Al–0.1Zr and Al–0.1Zr–0.1Ti (at.%) alloys at 300–400 °C , 2008 .
[34] D. Seidman,et al. Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during aging at 450–600 °C , 2008 .
[35] D. Seidman,et al. Nucleation and Precipitation Strengthening in Dilute Al-Ti and Al-Zr Alloys , 2007 .
[36] D. Dunand,et al. Strengthening mechanisms in aluminum containing coherent Al3Sc precipitates and incoherent Al2O3 dispersoids , 2007 .
[37] D. Seidman,et al. Criteria for developing castable, creep-resistant aluminum-based alloys – A review , 2006 .
[38] K. F. Russell,et al. Strategies for fabricating atom probe specimens with a dual beam FIB. , 2005, Ultramicroscopy.
[39] J. Røyset,et al. Scandium in aluminium alloys , 2005 .
[40] K. Marthinsen,et al. Three dimensional atom probe investigation on the formation of Al3(Sc, Zr)-dispersoids in aluminium alloys , 2004 .
[41] Y. Miura,et al. Loss in coherency and coarsening behavior of Al3Sc precipitates , 2004 .
[42] D. Seidman,et al. Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures , 2003 .
[43] D. Seidman,et al. Effect of Mg addition on the creep and yield behavior of an Al–Sc alloy , 2003 .
[44] D. Dunand,et al. Model for creep threshold stress in precipitation-strengthened alloys with coherent particles , 2002 .
[45] E. Nembach,et al. On the additivity of solid solution and dispersion strengthening , 2001 .
[46] A. Ardell,et al. Precipitation of Al3Sc in binary Al–Sc alloys , 2001 .
[47] Emmanuelle A. Marquis,et al. Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys , 2001 .
[48] Dieter Isheim,et al. Analysis of Three-dimensional Atom-probe Data by the Proximity Histogram , 2000, Microscopy and Microanalysis.
[49] D. Seidman,et al. CREEP PROPERTIES OF COARSE-GRAINED Al(Sc) ALLOYS AT 300°C , 1999 .
[50] I. Ansara,et al. Thermodynamic assessment of the AlNi system , 1997 .
[51] J. Cahoon,et al. Creep regimes for directionally solidified Al-Al3Ni eutectic composite , 1993, Metallurgical and Materials Transactions A.
[52] N. Belov. Structure and strength of cast alloys of the system aluminum-nickel-zirconium , 1993 .
[53] D. Seidman,et al. Systematic procedures for atom-probe field-ion microscopy studies of grain boundary segregation , 1992 .
[54] P. Nash,et al. The Al-Ni-Zr system (Aluminum-Nickel-Zirconium) , 1991 .
[55] E. Arzt,et al. The kinetics of dislocation climb over hard particles—II. Effects of an attractive particle-dislocation interaction , 1988 .
[56] M. Ashby,et al. Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics , 1982 .
[57] H. W. Kerr,et al. Off-eutectic composite solidification and properties in Al-Ni and Al-Co alloys , 1971 .
[58] M. Makin,et al. DISLOCATION MOVEMENT THROUGH RANDOM ARRAYS OF OBSTACLES , 1966 .
[59] T. S. Lundy,et al. Diffusion of Al26 and Mn54 in Aluminum , 1962 .
[60] T. Dorin,et al. Aluminium scandium alloys , 2018 .
[61] I. Guillot,et al. Modeling of the influence of coarsening on viscoplastic behavior of a 319 foundry aluminum alloy , 2013 .
[62] D. Seidman,et al. Precipitation evolution in Al-Zr and Al-Zr-Ti alloys during isothermal aging at 375-425 °C , 2008 .
[63] D. Isheim,et al. Alloy Design of Nanoscale Precipitation Strengthened Alloys : Design of a Heat Treatable Aluminum Alloy Useful to 400 ° C , 2006 .
[64] D. Eskin,et al. Improving the properties of cold-rolled Al-6%Ni sheets by alloying and heat treatment , 2004 .
[65] S. Goto,et al. Effect of Zirconium on Liquidus and Hardening of Al – 6 % Ni Casting Alloy , 2004 .
[66] M. Salkind,et al. The Effect of Fiber Orientation and Morphology on the Tensile Behavior of Al 3 Ni Whisker Reinforced Aluminum , 1968 .