Impact wear and other contact effects on the electro-mechanical reliability of MEMS

Within reliability issues in the MEMS field, the contact problem is one of the most complex to model and validate. In fact, it is influenced by many electro-thermo-mechanical parameters that make extremely difficult to predict the damaging effects on the involved surfaces and its implications on the device performances and reliability. The goal of this paper is to analyze the impact wear and the other effects of contact on the electromechanical properties of MEMS by means of dedicated experiments. Long term tests of repetitive impact loading are reported with the goal of relating the excitation parameters to the electrical RF performances degradation of the devices due to impact effects on electrode surfaces.

[1]  Steven T. Patton,et al.  Failure Mechanisms of Capacitive MEMS RF Switch Contacts , 2005 .

[2]  G. Meneghesso,et al.  Acceleration of Microwelding on Ohmic RF-MEMS Switches , 2011, Journal of Microelectromechanical Systems.

[3]  Gaudenzio Meneghesso,et al.  Study of the actuation speed, bounces occurrences, and contact reliability of ohmic RF-MEMS switches , 2010, Microelectron. Reliab..

[4]  J. Krim,et al.  Surface roughness, asperity contact and gold RF MEMS switch behavior , 2007 .

[5]  F. F. Ling,et al.  Impact Wear of Materials , 1976 .

[6]  Gabriel M. Rebeiz.  RF MEMS: Theory, Design and Technology , 2003 .

[7]  S. T. Patton,et al.  Fundamental studies of Au contacts in MEMS RF switches , 2005 .

[8]  M. Mehregany,et al.  Contact physics of gold microcontacts for MEMS switches , 1998, Electrical Contacts - 1998. Proceedings of the Forty-Fourth IEEE Holm Conference on Electrical Contacts (Cat. No.98CB36238).

[9]  Kyriakos Komvopoulos,et al.  Finite element analysis of a layered elastic solid in normal contact with a rigid surface , 1988 .

[10]  Nicole Fruehauf,et al.  Failure Of Materials In Mechanical Design Analysis Prediction Prevention , 2016 .

[11]  Giorgio De Pasquale,et al.  Reliability improvement in microstructures by reducing the impact velocity through electrostatic force modulation , 2012, Microelectron. Reliab..

[12]  Feodor M. Borodich,et al.  Similarity and fractality in the modelling of roughness by a multilevel profile with hierarchical structure , 1999 .

[13]  Jack A. Collins,et al.  Failure of materials in mechanical design , 1981 .

[14]  J. DeNatale,et al.  RF MEMS reliability , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[15]  Alvise Bagolini,et al.  Stress characterization of electroplated gold layers for low temperature surface micromachining , 2003, Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 2003..

[16]  Kyriakos Komvopoulos,et al.  Three-Dimensional Finite Element Analysis of Surface Deformation and Stresses in an Elastic-Plastic Layered Medium Subjected to Indentation and Sliding Contact Loading , 1996 .

[17]  J. Greenwood,et al.  Contact of nominally flat surfaces , 1966, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[18]  David J. Goodman,et al.  Personal Communications , 1994, Mobile Communications.

[19]  A. Majumdar,et al.  Fractal characterization and simulation of rough surfaces , 1990 .