Efficient bilayer polymer solar cells possessing planar mixed-heterojunction structures

We have investigated the influence of thermal annealing on the performance of polymer bilayer solar cell devices incorporating poly{2,6-(4,4-bis[2-ethylhexyl]-4H-cyclopenta[2,1-b;3,4-b′]dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)} (PCPDTTBT) as the donor and two kinds of fullerenes (C60, C70) as acceptors. The higher absorption of C70 increased the external quantum efficiency in the spectral range 400–600 nm. We observed morphological changes of the polymer films when the pre-annealing temperature was near the crystalline temperature (Tc, 207 °C). These nanostructural transformations resulted in a modified interfacial morphology of the donor phases and, therefore, greatly influenced the device performance. Post-annealing treatment reorganized the interface between the donor and acceptor phases, leading to better contact. The highest power conversion efficiency (2.85%) was obtained when we performed device pre- and post-annealing both at 200 °C for 30 min; the open-circuit voltage was 0.69 V and the short-circuit current was 8.42 mA cm−2.

[1]  Roar R. Søndergaard,et al.  Advanced materials and processes for polymer solar cell devices , 2010 .

[2]  K. Hashimoto,et al.  Polymer bulk heterojunction photovoltaic devices with multilayer structures prepared by thermal lamination. , 2009, ACS applied materials & interfaces.

[3]  John R. Reynolds,et al.  A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules , 2009 .

[4]  K. Ho,et al.  Three-dimensional nanoscale imaging of polymer bulk-heterojunction by scanning electrical potential microscopy and C60(+) cluster ion slicing. , 2009, Analytical chemistry.

[5]  Benjamin J. Schwartz,et al.  Reappraising the Need for Bulk Heterojunctions in Polymer−Fullerene Photovoltaics: The Role of Carrier Transport in All-Solution-Processed P3HT/PCBM Bilayer Solar Cells , 2009 .

[6]  Ping Lu,et al.  Optimization of ZnO Nanorod Array Morphology for Hybrid Photovoltaic Devices , 2009 .

[7]  Frederik C. Krebs,et al.  All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps , 2009 .

[8]  Barry P Rand,et al.  The characterization of chloroboron (III) subnaphthalocyanine thin films and their application as a donor material for organic solar cells , 2009 .

[9]  J. Loos,et al.  Three-dimensional nanoscale organization of polymer solar cells , 2009 .

[10]  F. Krebs,et al.  A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies , 2009 .

[11]  C. Zhang,et al.  Improvement of the efficiency of CuPc/C60-based photovoltaic cells using a multistepped structure , 2009 .

[12]  Weihua Tang,et al.  Hole transport in Poly[2,7-(9,9-dihexylfluorene)-alt-bithiophene] and high-efficiency polymer solar cells from its blends with PCBM. , 2009, ACS applied materials & interfaces.

[13]  C. Frisbie,et al.  Enhancement of the Morphology and Open Circuit Voltage in Bilayer Polymer/Fullerene Solar Cells , 2009 .

[14]  K. Ho,et al.  Fabrication of multilayer organic solar cells through a stamping technique , 2009 .

[15]  M. Andersson,et al.  Photogenerated charge carrier transport and recombination in polyfluorene/fullerene bilayer and blend photovoltaic devices , 2009 .

[16]  K. Ho,et al.  Tunable Novel Cyclopentadithiophene-Based Copolymers Containing Various Numbers of Bithiazole and Thienyl Units for Organic Photovoltaic Cell Applications , 2009 .

[17]  L. Dai,et al.  Liquid Crystalline Polymers for Efficient Bilayer-Bulk-Heterojunction Solar Cells , 2009 .

[18]  Ole Hagemann,et al.  A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration , 2009 .

[19]  F. Krebs.  Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .

[20]  Christoph J. Brabec,et al.  Organic tandem solar cells: A review , 2009 .

[21]  Michael D. McGehee,et al.  Nanostructured Organic—Inorganic Hybrid Solar Cells , 2009 .

[22]  Kuo-Chuan Ho,et al.  Annealing effect of polymer bulk heterojunction solar cells based on polyfluorene and fullerene blend , 2009 .

[23]  Kuo-Chuan Ho,et al.  Effects of nanomorphological changes on the performance of solar cells with blends of poly[9,9′-dioctyl-fluorene-co-bithiophene] and a soluble fullerene , 2009, Nanotechnology.

[24]  W. Xu,et al.  Facile Method for Fabrication of Nanostructured CuPC Thin Films To Enhance Photocurrent Generation , 2008 .

[25]  P. Sullivan,et al.  Pentacene/fullerene (C60) heterojunction solar cells: Device performance and degradation mechanisms , 2008 .

[26]  Joseph M. DeSimone,et al.  Nanostructured Titania−Polymer Photovoltaic Devices Made Using PFPE-Based Nanomolding Techniques , 2008 .

[27]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[28]  F. Krebs,et al.  Analysis of the failure mechanism for a stable organic photovoltaic during 10 000 h of testing , 2007 .

[29]  Jenny Nelson,et al.  Hybrid polymer-metal oxide thin films for photovoltaic applications{ , 2007 .

[30]  Kristian O. Sylvester-Hvid,et al.  Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy , 2007 .

[31]  Malte C. Gather,et al.  An Improved Optical Method for Determining the Order Parameter in Thin Oriented Molecular Films and Demonstration of a Highly Axial Dipole Moment for the Lowest Energy π–π* Optical Transition in Poly(9,9‐ dioctylfluorene‐co‐bithiophene) , 2007 .

[32]  M. Lux‐Steiner,et al.  On the function of a bathocuproine buffer layer in organic photovoltaic cells , 2006 .

[33]  Xiaoyuan Hou,et al.  Role of hole playing in improving performance of organic light-emitting devices with an Al2O3 layer inserted at the cathode-organic interface , 2006 .

[34]  Michael D. McGehee,et al.  Photovoltaic cells made from conjugated polymers infiltrated into mesoporous titania , 2003 .

[35]  Jessica E. Kroeze,et al.  Contactless Determination of the Photoconductivity Action Spectrum, Exciton Diffusion Length, and Charge Separation Efficiency in Polythiophene-Sensitized TiO2 Bilayers , 2003 .

[36]  Stephen R. Forrest,et al.  Small molecular weight organic thin-film photodetectors and solar cells , 2003 .

[37]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[38]  C. Tang.  Two‐layer organic photovoltaic cell , 1986 .