Mixed Elastohydrodynamic Lubrication With Three-Dimensional Machined Roughness in Spiral Bevel and Hypoid Gears

[1]  Ahmet Kahraman,et al.  A Transient Mixed Elastohydrodynamic Lubrication Model for Spur Gear Pairs , 2010 .

[2]  Liming Chang.  A deterministic model for line-contact partial elastohydrodynamic lubrication , 1995 .

[3]  Dong Zhu,et al.  A Full Numerical Solution to the Mixed Lubrication in Point Contacts , 2000 .

[4]  Homer Rahnejat,et al.  Non-Newtonian mixed elastohydrodynamics of differential hypoid gears at high loads , 2014 .

[5]  Caichao Zhu,et al.  Parametric studies of spur gear lubrication performance considering dynamic loads , 2012 .

[6]  R. Larsson.  Transient non-Newtonian elastohydrodynamic lubrication analysis of an involute spur gear , 1997 .

[7]  Herbert S. Cheng,et al.  An Analysis and Computational Procedure for EHL Film Thickness, Friction and Flash Temperature in Line and Point Contacts , 1989 .

[8]  A. Gu.  Elastohydrodynamic Lubrication of Involute Gears , 1973 .

[9]  S. Bair,et al.  A Rheological Model for Elastohydrodynamic Contacts Based on Primary Laboratory Data , 1979 .

[10]  Behaviour of lubricants in the mixed elastohydrodynamic regime , 1995 .

[11]  Vilmos Simon,et al.  Elastohydrodynamic Lubrication of Hypoid Gears , 1980 .

[12]  Dong Zhu,et al.  A Theoretical Analysis of the Mixed Elastohydrodynamic Lubrication in Elliptical Contacts With an Arbitrary Entrainment Angle , 2014 .

[13]  S. Bair,et al.  A Quantitative Solution for the Full Shear-Thinning EHL Point Contact Problem Including Traction , 2007 .

[14]  Hugh Spikes,et al.  Lubricant Film Thickness in Rough Surface, Mixed Elastohydrodynamic Contact , 2000 .

[15]  D. Zhu,et al.  On some aspects of numerical solutions of thin-film and mixed elastohydrodynamic lubrication , 2007 .

[16]  Hugh Spikes,et al.  The Control of Friction by Molecular Fractionation of Base Fluid Mixtures at Metal Surfaces , 1997 .

[17]  Dong Zhu,et al.  On the Numerical Accuracy of Rough Surface EHL Solution , 2014 .

[18]  H. S. Cheng,et al.  Paper XIV (i) A Comprehensive Analysis for Contact Geometry, Kinematics, Lubrication Performance, Bulk and Flash Temperatures in Helical Gears , 1991 .

[19]  F. Litvin,et al.  Gear geometry and applied theory , 1994 .

[20]  Vilmos Simon.  Influence of machine tool setting parameters on EHD lubrication in hypoid gears , 2009 .

[21]  S. Wen,et al.  Thin film lubrication. Part I. Study on the transition between EHL and thin film lubrication using a relative optical interference intensity technique , 1996 .

[23]  Yuanzhong Hu,et al.  Effects of Differential Scheme and Mesh Density on EHL Film Thickness in Point Contacts , 2006 .

[24]  Henry Peredur Evans,et al.  Analysis of Mixed Lubrication Effects in Simulated Gear Tooth Contacts , 2005 .

[25]  Dong Zhu,et al.  Pitting Life Prediction Based on a 3D Line Contact Mixed EHL Analysis and Subsurface von Mises Stress Calculation , 2009 .

[26]  Martin Hartl,et al.  The effect of surface texturing on thin EHD lubrication films , 2007 .

[27]  Dong Zhu,et al.  Elastohydrodynamic Lubrication: A Gateway to Interfacial Mechanics—Review and Prospect , 2011 .

[28]  Dong Zhu,et al.  Friction Reduction in Mixed Lubrication , 2007 .

[29]  H C Chao,et al.  A computer solution for the dynamic load, lubricant film thickness and surface temperatures in spiral bevel gears , 1987 .