Overview of the NASA Entry, Descent and Landing Systems Analysis Studies for Large Robotic-class Missions

NASA senior management commissioned the Entry, Descent and Landing Systems Analysis Study in 2008 to identify and roadmap the Entry, Descent and Landing technology investments that the agency needed to make in order to successfully land large payloads at Mars for both robotic and human-scale missions. This paper summarizes the approach and top-level results from Year 2 of the Study, which focused on landing 1‐4 mt on Mars for robotic missions. Two separate studies were conducted in Year 2: the Mars Science Laboratory Improvement Study, which determined technology development program needs to support increases in landed payload and landed altitude beyond the Mars Science Laboratory capability using an Atlas V launch vehicle and the Exploration Feed-Forward Study, which examined a potential precursor mission using a Delta IV-H launch vehicle with landed payload in the 2‐4 mt range that would demonstrate key technologies needed for later human missions.

[1]  David J. Kinney,et al.  Overview of the NASA Entry, Descent and Landing Systems Analysis Study , 2010 .

[2]  Jamshid A. Samareh,et al.  Parametric Mass Modeling for Mars Entry, Descent and Landing System Analysis Study , 2011 .

[3]  S. Hoffman,et al.  Human exploration of Mars, Design Reference Architecture 5.0 , 2010, 2010 IEEE Aerospace Conference.

[4]  Walter C. Engelund,et al.  Entry, Descent and Landing Systems Analysis Study: Phase 2 Report on Exploration Feed-Forward Systems , 2011 .

[5]  Lee S. Mason,et al.  A Summary of NASA Architecture Studies Utilizing Fission Surface Power Technology , 2010 .

[6]  Thomas A. Zang,et al.  Overview of the NASA Entry, Descent and Landing Systems Analysis Exploration Feed-Forward Study , 2011 .

[7]  James O. Arnold,et al.  Overview of Initial Development of Flexible Ablators for Hypersonic Inflatable Aerodynamic Decelerators , 2011 .

[8]  Richard W. Powell,et al.  Large Mass, Entry, Descent and Landing Sensitivity Results for Environmental, Performance, and Design Parameters , 2010 .

[9]  Jamshid A. Samareh,et al.  Estimating Mass of Inflatable Aerodynamic Decelerators Using Dimensionless Parameters , 2011 .

[10]  Dwyer Cianciolo,et al.  Entry, Descent and Landing Systems Analysis: Exploration Feed Forward Internal Peer Review Slide Package , 2011 .

[11]  David Kinney.  Aerodynamic and Aerothermal Environment Models for a Mars Entry, Descent, and Landing Systems Analysis Study , 2011 .

[12]  David J. Kinney,et al.  Entry, Descent and Landing Systems analysis study: Phase 2 Report on Mars Science Laboratory Improvement , 2011 .

[13]  Mary McGuire,et al.  Flexible Ablative Thermal Protection Sizing on Infl atable Aerodynamic Decelerator for Human Mars Entry Descent and Landing , 2011 .

[14]  Stephen J. Hughes,et al.  Advanced High-Temperature Flexible TPS for Inflatable Aerodynamic Decelerators , 2011 .

[15]  Douglas O. Stanley,et al.  Mars Exploration Entry and Descent and Landing Technology Assessment Figures of Merit , 2010 .

[16]  Mary Kathleen McGuire.  Dual Heat Pulse, Dual Layer Thermal Protection System Sizing Analysis and Trade Studies for Human Mars Entry Descent and Landing , 2011 .

[17]  Richard W. Powell,et al.  Entry, Descent and Landing Systems Analysis: Exploration Class Simulation Overview and Results , 2010 .

[18]  David J. Kinney,et al.  Entry, Descent and Landing Systems Analysis Study: Phase 1 Report , 2010 .

[19]  Richard W. Powell,et al.  Trajectory Guidance for Mars Robotic Precursors: Aerocapture, Entry, Descent, and Landing , 2011 .

[20]  C.D. Epp,et al.  Autonomous Precision Landing and Hazard Detection and Avoidance Technology (ALHAT) , 2007, 2007 IEEE Aerospace Conference.

[21]  Alicia Dwyer Cianciolo,et al.  Aerocapture Guidance and Performance at Mars for High-Mass Systems , 2010 .

[22]  Richard W. Powell,et al.  Guidance and Control Algorithms for the Mars Entry, Descent and Landing Systems Analysis , 2010 .