Heat Transfer of Winglet Tips in a Transonic Turbine Cascade

Understanding the heat transfer of winglet tips is crucial for their applications in highpressure turbines. The current paper investigates the heat transfer performance of three different winglet-cavity tips in a transonic turbine cascade at a tip gap of 2.1% chord. A cavity tip is studied as the baseline case. The cascade operates at engine representative conditions of an exit Mach number of 1.2 and an exit Reynolds number of 1.7-106. Transient infrared thermography technique was used to obtain the tip distributions of heat transfer coefficient for different tips in the experiment. The CFD results were validated with the measured tip heat transfer coefficients, and then used to explain the flow physics related to heat transfer. It is found that on the pressure side winglet, the flow reattaches on the top winglet surface and results in high heat transfer coefficient. On the suction side winglet, the heat transfer coefficient is low near the blade leading edge but is higher from the midchord to the trailing edge. The suction side winglet pushes the tip leakage vortex further away from the blade suction surface and reduces the heat transfer coefficient from 85% to 96% span on the blade suction surface. However, the heat transfer coefficient is higher for the winglet tips from 96% span to the tip. This is because the tip leakage vortex attaches on the side surface of the suction side winglet and results in quite high heat transfer coefficient on the front protrusive part of the winglet. The effects of relative endwall motion between the blade tip and the casing were investigated by CFD method. The endwall motion has a significant effect on the flow physics within the tip gap and near-tip region in the blade passage, thus affects the heat transfer coefficient distributions. With relative endwall motion, a scraping vortex forms inside the tip gap and near the casing, and the cavity vortex gets closer to the pressure side squealer/winglet. The tip leakage vortex in the blade passage becomes closer to the blade suction surface, resulting in an increase of the heat transfer coefficient.

[1]  Howard P. Hodson,et al.  Aeromechanical Optimization of a Winglet-Squealer Tip for an Axial Turbine , 2014 .

[2]  Je-Chin Han,et al.  Heat Transfer Coefficients on the Squealer Tip and Near-Tip Regions of a Gas Turbine Blade With Single or Double Squealer , 2003 .

[3]  Steen A. Sjolander,et al.  Effects of Simulated Rotation on Tip Leakage in a Planar Cascade of Turbine Blades: Part I—Tip Gap Flow , 1992 .

[4]  Je-Chin Han,et al.  Effects of rim location, rim height, and tip clearance on the tip and near tip region heat transfer of a gas turbine blade , 2004 .

[5]  Je-Chin Han,et al.  Effect of Squealer Geometry Arrangement on a Gas Turbine Blade Tip Heat Transfer , 2002 .

[6]  R. Bunker,et al.  Blade Tip Leakage Flow and Heat Transfer with Pressure-Side Winglet , 2006 .

[7]  K. V. Patel.  Research on a High Work Axial Gas Generator Turbine , 1980 .

[8]  Mark Stokes,et al.  Effects of Winglet Geometry on the Aerodynamic Performance of Tip Leakage Flow in a Turbine Cascade , 2013 .

[9]  Richard J Goldstein,et al.  Effects of Tip Geometry and Tip Clearance on the Mass/Heat Transfer From a Large-Scale Gas Turbine Blade , 2003 .

[10]  Chao Zhou,et al.  Squealer Geometry Effects on Aerothermal Performance of Tip-Leakage Flow of Cavity Tips , 2012 .

[11]  Neil William Harvey,et al.  An Investigation Into a Novel Turbine Rotor Winglet: Part I — Design and Model Rig Test Results , 2006 .

[12]  Richard J Goldstein,et al.  Effect of Endwall Motion on Blade Tip Heat Transfer , 2003 .

[13]  Zhenping Feng,et al.  Investigation of Leakage Flow and Heat Transfer in a Gas Turbine Blade Tip With Emphasis on the Effect of Rotation , 2010 .

[14]  Howard P. Hodson,et al.  Heat transfer and aerodynamics of turbine blade tips in a linear cascade , 2006 .

[15]  H. Cho,et al.  Local Heat/Mass Transfer Characteristics on a Rotating Blade With Flat Tip in a Low-Speed Annular Cascade—Part II: Tip and Shroud , 2006 .

[16]  J. E. LaGraff,et al.  Blade Tip Heat Transfer and Aerodynamics in a Large Scale Turbine Cascade With Moving Endwall , 2012 .

[17]  Qiang Zhang,et al.  Ramp heating in high-speed transient thermal measurement with reduced uncertainty , 2015 .

[18]  Y. Nho,et al.  Effects of Tip Shape on the Gas Turbine Blade Tip Heat Transfer , 2012 .

[20]  Je-Chin Han,et al.  Heat transfer coefficients on the squealer tip and near squealer tip regions of a gas turbine blade , 2003 .

[21]  J. E. LaGraff,et al.  PIV Maps of Tip Leakage and Secondary Flow Fields on a Low-Speed Turbine Blade Cascade With Moving End Wall , 2008 .

[22]  Howard P. Hodson,et al.  Winglets for Improved Aerothermal Performance of High Pressure Turbines , 2013 .

[23]  H. Hodson,et al.  Effects of Endwall Motion on the Aero-Thermal Performance of a Winglet Tip in a HP Turbine , 2012 .

[24]  M. L. G. Oldfield,et al.  Impulse Response Processing of Transient Heat Transfer Gauge Signals , 2008 .