Design, Development, and Analysis of a Hybrid Serial-Parallel Machine for Precision Polishing

[1]  Jeha Ryu,et al.  Orientation workspace analysis of 6-DOF parallel manipulators , 1999 .

[2]  J. Angeles,et al.  Generalized transmission index and transmission quality for spatial linkages , 2007 .

[3]  Tsuneo Yoshikawa,et al.  Manipulability of Robotic Mechanisms , 1985 .

[4]  Fengfeng Xi,et al.  Modeling and control of automated polishing/deburring process using a dual-purpose compliant toolhead , 2008 .

[5]  Jian S. Dai,et al.  Mobility analysis of complex joints by means of screw theory , 2009, Robotica.

[6]  C. Gosselin,et al.  The optimum kinematic design of a spherical three-degree-of-freedom parallel manipulator , 1988 .

[7]  Bing Li,et al.  Modelling and Control of Inverse Dynamics for a 5-DOF Parallel Kinematic Polishing Machine , 2013 .

[8]  Christian Brecher,et al.  NURBS Based Ultra-Precision Free-Form Machining , 2006 .

[9]  James Roger P. Angel,et al.  Progress in the stressed-lap polishing of a 1.8-m f/1 mirror , 1990, Astronomical Telescopes and Instrumentation.

[10]  Ji Zhao,et al.  Calibration of a parallel mechanism in a serial-parallel polishing machine tool based on genetic algorithm , 2015 .

[11]  V. K. Jain,et al.  Analysis of forces on the freeform surface in magnetorheological fluid based finishing process , 2013 .

[12]  Seiichiro Katsura,et al.  Development of 5-axis polishing machine capable of simultaneous trajectory, posture, and force control , 2013 .

[13]  A. Morgan,et al.  Numerical Continuation Methods for Solving Polynomial Systems Arising in Kinematics , 1990 .

[14]  Damien Chablat,et al.  An Interval Analysis Based Study for the Design and the Comparison of Three-Degrees-of-Freedom Parallel Kinematic Machines , 2004, Int. J. Robotics Res..

[15]  Weiyang Lin,et al.  Path planning of mechanical polishing process for freeform surface with a small polishing tool , 2014, ROBIO 2014.

[16]  Lina,et al.  Fuzzy-Appearance Manifold and Fuzzy-Nearest Distance Calculation for Model-Less 3D Pose Estimation of Degraded Face Images , 2013 .

[17]  Jean-Pierre Merlet,et al.  Parallel manipulators: state of the art and perspectives , 1992, Adv. Robotics.

[18]  Lynn N. Allen.  Progress in ion figuring large optics , 1995, Laser Damage.

[19]  Clément Gosselin,et al.  A Global Performance Index for the Kinematic Optimization of Robotic Manipulators , 1991 .

[20]  L. Tsai,et al.  Kinematics and Optimization of a Spatial 3-UPU Parallel Manipulator , 2000 .

[21]  Xin-Jun Liu,et al.  A New Approach to the Design of a DELTA Robot with a Desired Workspace , 2004, J. Intell. Robotic Syst..

[22]  R H Nagel,et al.  Practical design and performance of the stressed-lap polishing tool. , 1994, Applied optics.

[23]  Anthony Beaucamp,et al.  Use of the 'Precessions' process for prepolishing and correcting 2D & 2(1/2)D form. , 2006, Optics express.

[24]  Ming-June Tsai,et al.  Generalized evaluation for the transmission performance of mechanisms , 1994 .

[25]  Peng Xu,et al.  Kinematics analysis of a hybrid manipulator for computer controlled ultra-precision freeform polishing , 2017 .

[26]  Carlo Innocenti,et al.  Direct position analysis of the Stewart platform mechanism , 1990 .

[27]  Sug-Whan Kim,et al.  The 'Precessions' tooling for polishing and figuring flat, spherical and aspheric surfaces. , 2003, Optics express.

[28]  Xin-Jun Liu.  Optimal kinematic design of a three translational DoFs parallel manipulator , 2006, Robotica.

[29]  William Kordonski,et al.  Fundamentals of Magnetorheological Fluid Utilization in High Precision Finishing , 1999 .