Comparative Study of 1-MW PM and HTS Synchronous Generators for Marine Current Turbine

Thanks to the high predictability and energy density of marine current, it can be utilized to generate electricity in an environmental and efficient form. However, placing a large-scale marine current turbine system is challenging, which requires a proper drive-train system to achieve high efficiency. In this paper, a conceptual structure of direct-driven marine current turbine generator (MCTG) is proposed. Then, the electromagnetic design method is developed, including the specifications, design, and optimization procedures. Two generator topologies using permanent magnets (PMs) and high temperature superconducting (HTS) windings in field poles are adopted for comparison. Design results demonstrate that it is feasible to design a 1-MW MCTG with HTS field winding at 77 K for the proposed structure. Furthermore, the optimum number of poles is found near 66 and 32 for PM and HTS topologies, respectively. Finally, it is found that the weight and efficiency for MCTG is around 17 ton, 89.6 % for the PM topology and 16 ton, 91.9 % for the HTS topology.

[1]  M. Wilke,et al.  Design Challenges and Benefits of HTS Synchronous Machines , 2007, 2007 IEEE Power Engineering Society General Meeting.

[2]  K.W. Schmaeman,et al.  Compact, lightweight, superconducting power generators , 2004, 2004 12th Symposium on Electromagnetic Launch Technology.

[3]  N. Maki,et al.  Electrical Design Study of 10-MW Salient-Pole Wind Turbine HTS Synchronous Generators , 2014, IEEE Transactions on Applied Superconductivity.

[4]  D. Li,et al.  An overview of ocean renewable energy in China , 2011 .

[5]  K. Haran,et al.  High power density superconducting rotating machines—development status and technology roadmap , 2017 .

[6]  Stephen Nash,et al.  A review of the current understanding of the hydro-environmental impacts of energy removal by tidal turbines , 2017 .

[7]  Mitsuru Izumi,et al.  An overview of rotating machine systems with high-temperature bulk superconductors , 2012 .

[8]  Yasuhiro Iijima,et al.  Evaluation of Rare-earth-based Coated Conductors , 2013 .

[9]  N. Maki,et al.  Study of Key Parameters and Cryogenic Vessel Structure of 10-MW Salient-Pole Wind Turbine HTS Generators , 2015, IEEE Transactions on Applied Superconductivity.

[10]  A. Bahaj.  Marine current energy conversion: the dawn of a new era in electricity production , 2013, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[11]  Gregory L. Rhoads,et al.  Review of high power density superconducting generators: Present state and prospects for incorporating YBCO windings , 2005 .

[12]  Frede Blaabjerg,et al.  Overview of Control and Grid Synchronization for Distributed Power Generation Systems , 2006, IEEE Transactions on Industrial Electronics.