Nonlinear modeling of drop size distributions produced by pressure-swirl atomizers

Abstract An axisymmetric boundary element method (BEM) has been developed to simulate atomization processes in a pressure-swirl atomizer. Annular ligaments are pinched from the parent sheet and presumed to breakup via the linear stability model due to Ponstein. Corrections to Ponstein’s result are used to predict satellite droplet sizes formed during this process. The implementation provides a first-principles capability to simulate drop size distributions for low viscosity fluids. Results show reasonable agreement with measured droplet size distributions and the predicted SMD is 30–40% smaller than experiment. The model predicts a large number of very small droplets that cannot typically be resolved in an experimental observation of the spray. A quasi-3-D spray visualization is presented by tracking droplets in a Lagrangian fashion from their formation point within the ring-shaped ligaments. A complete simulation is provided for a case generating over 80,000 drops.

[1]  Jack Dongarra,et al.  ScaLAPACK Users' Guide , 1987 .

[2]  S. Yoon,et al.  A nonlinear atomization model based on a boundary layer instability mechanism , 2004 .

[3]  Thomas S. Lundgren,et al.  Oscillations of drops in zero gravity with weak viscous effects , 1988, Journal of Fluid Mechanics.

[4]  Christophe Dumouchel,et al.  On the experimental investigation on primary atomization of liquid streams , 2008 .

[5]  S. Yoon,et al.  On the nonlinear stability of a swirling liquid jet , 2006 .

[6]  Christophe Dumouchel,et al.  COUPLING OF CLASSICAL LINEAR THEORY AND MAXIMUM ENTROPY FORMALISM FOR PREDICTION OF DROP SIZE DISTRIBUTION IN SPRAYS: APPLICATION TO PRESSURE-SWIRL ATOMIZERS , 1996 .

[7]  S. Heister.  Boundary element methods for two-fluid free surface flows , 1997 .

[8]  H Vermeer,et al.  Prediction of drop size distributions in sprays using the maximum entropy formalism : the effect of satellite formation , 1994 .

[9]  Rolf D. Reitz,et al.  BREAKUP MECHANISMS AND DRAG COEFFICIENTS OF HIGH-SPEED VAPORIZING LIQUID DROPS , 1996 .

[10]  Arthur H. Lefebvre,et al.  Internal flow characteristics of simplex swirl atomizers , 1984 .

[11]  J. Ponstein,et al.  Instability of rotating cylindrical jets , 1959 .

[12]  Mehran Ahmadi,et al.  A SIMPLIFIED MAXIMUM-ENTROPY-BASED DROP SIZE DISTRIBUTION , 1993 .

[13]  S. Heister,et al.  Nonlinear simulation of free surfaces and atomization in pressure swirl atomizers , 2006 .

[14]  Rolf D. Reitz,et al.  MODELING ATOMIZATION PROCESSES OF PRESSURE-SWIRL HOLLOW-CONE FUEL SPRAYS , 1997 .

[15]  San-Mou Jeng,et al.  A Comprehensive Model to Predict Simplex Atomizer Performance , 1998 .

[16]  A. Lefebvre,et al.  Film thickness measurements in a simplex swirl atomizer , 1986 .

[17]  F. Durst,et al.  Comparative Study of some Probability Distributions Applied to Liquid Sprays , 1989 .

[18]  Vigor Yang,et al.  Liquid-Propellant Rocket Engine Injector Dynamics , 1998 .

[19]  S. Heister,et al.  Droplet size control in liquid jet breakup , 1996 .

[20]  J. Liggett,et al.  The Boundary Integral Equation Method for Porous Media Flow , 1982 .

[21]  R. Sellens,et al.  Prediction of the drop size and velocity distribution in a spray, based on the maximum entropy formalism , 1989 .

[22]  Effect of Acoustic Perturbations on Liquid Jet Atomization , 1997 .