Theoretical analysis on carbon fiber reinforced aluminum laminate under off-center impact

[1]  Bingquan Lu,et al.  Study on off-center impact behavior and damage characterization of carbon fiber reinforced aluminum laminate , 2023, Composite Structures.

[2]  Zhenyu Yang,et al.  Crashworthiness design of a sponge-inspired multicell tube under axial crushing , 2022, International Journal of Mechanical Sciences.

[3]  Zhenjun Wang,et al.  Tensile behavior and failure mechanism of 3D woven fabric reinforced aluminum composites , 2022, International Journal of Mechanical Sciences.

[4]  Bingquan Lu,et al.  Energy absorption performance of fully clamped curved tubes under transverse loading , 2022, Thin-Walled Structures.

[5]  R. Velmurugan,et al.  Analytical modelling of low-velocity impact response characterization of titanium and glass fibre reinforced polymer hybrid laminate composites , 2022, Thin-Walled Structures.

[6]  A. Mouritz,et al.  Impact damage to fibre metal laminates under compression loading , 2022, Composites Communications.

[7]  D. Thambiratnam,et al.  Performance of CFRP strengthened full-scale SHS connections subjected to cyclic loading , 2022, Thin-Walled Structures.

[8]  R. S. Mulik,et al.  Deformation dynamics of h-BN reinforced polyethylene nanocomposite under shock/impact loading , 2022, International Journal of Mechanical Sciences.

[9]  M. A. Neto,et al.  Multi-impact behaviour of composite laminates under constant and different energy levels , 2022, Composite Structures.

[10]  Zheyi Zhang,et al.  Axial crushing response of carbon/glass hybrid composite tubes: an experimental and multi-scale computational study , 2022, Composite Structures.

[11]  X. Yao,et al.  Shock compression of nanoporous silicon carbide at high strain rate , 2022, International Journal of Mechanical Sciences.

[12]  Weifeng Su,et al.  Investigation on graphene addition on the quasi-static and dynamic responses of carbon fibre-reinforced metal laminates , 2022, Thin-Walled Structures.

[13]  A. Mouritz,et al.  Finite Element Modelling Of The Impact Response Of Fibre Metal Laminates Under Tension Preloading , 2022, Composites Part A: Applied Science and Manufacturing.

[14]  T. Kanit,et al.  Effect of Matrix and Hybrid Reinforcement on Fibre Metal Laminates under Low–Velocity Impact Loading , 2022, Composite Structures.

[15]  Zhengong Zhou,et al.  Experimental and multiscale numerical investigation on failure behavior of satin woven carbon/carbon composites subjected to pin-loading , 2022, International Journal of Mechanical Sciences.

[16]  A. Orifici,et al.  Impact-Under-Load damage tolerance of a fibre metal laminate , 2022, Composite Structures.

[17]  J. Schneider,et al.  Dynamic crushing of tailored honeycombs realized via additive manufacturing , 2022, International Journal of Mechanical Sciences.

[18]  Wei Song,et al.  Compressive performance and energy absorption of additively manufactured metallic hybrid lattice structures , 2022, International Journal of Mechanical Sciences.

[19]  Guangyong Sun,et al.  Design optimization of bioinspired helicoidal CFRPP/GFRPP hybrid composites for multiple low-velocity impact loads , 2022, International Journal of Mechanical Sciences.

[20]  Recep Ekici,et al.  Effect of stacking sequence and metal volume fraction on the ballistic impact behaviors of ARALL fiber‐metal laminates: An experimental study , 2021, Polymer Composites.

[21]  Xudong Hu,et al.  Effect of off-axial angle on the low-velocity impact performance of braided laminates , 2021, International Journal of Mechanical Sciences.

[22]  G. Károlyi,et al.  Soft impact of an elongated elasto-plastic missile , 2021, International Journal of Mechanical Sciences.

[23]  Hui Li,et al.  Investigation of vibro-acoustic characteristics of FRP plates with porous foam core , 2021 .

[24]  Yefei Zhu,et al.  Low-velocity impact response of multilayer foam core sandwich panels with composite face sheets , 2021 .

[25]  Ankush P. Sharma,et al.  Damage and energy absorption characteristics of glass fiber reinforced titanium laminates to low-velocity impact , 2021, Mechanics of Advanced Materials and Structures.

[26]  Woong‐Ryeol Yu,et al.  Enhanced compressive and energy absorption properties of braided lattice and polyurethane foam hybrid composites , 2021 .

[27]  Qing Li,et al.  On impact behavior of fiber metal laminate (FML) structures: A state-of-the-art review , 2021 .

[28]  F. Taheri‐Behrooz,et al.  An experimental and numerical investigation on low velocity impact response of GLAREs , 2021 .

[29]  N. Huynh,et al.  In-silico experimentations of multimode shock response of polyurea , 2021 .

[30]  W. Liao,et al.  Energy absorption of thin walled tube filled with gradient auxetic structures-theory and simulation , 2021, International Journal of Mechanical Sciences.

[31]  E. Albak.  Crashworthiness design for multi-cell circumferentially corrugated thin-walled tubes with sub-sections under multiple loading conditions , 2021, Thin-Walled Structures.

[32]  Zhigang Zhang,et al.  Effect of metal type on the energy absorption of fiber metal laminates under low-velocity impact , 2021, Mechanics of Advanced Materials and Structures.

[33]  F. Zaïri,et al.  A multiscale and multiaxial model for anisotropic damage and failure of human annulus fibrosus , 2021 .

[34]  Shujuan Hou,et al.  Rate-related study on the ply orientation of carbon fiber reinforced epoxy composite laminates , 2020 .

[35]  Xiong Zhang,et al.  Crashworthiness and optimization design of quadruple-cell Aluminum/CFRP hybrid tubes under transverse bending , 2020 .

[36]  Xu Han,et al.  The mystery of coconut overturns the crashworthiness design of composite materials , 2020 .

[37]  Heran Wang,et al.  A dynamic constitutive model for fiber-reinforced composite under impact loading , 2020 .

[38]  Zhixiang Li,et al.  Crashworthiness of multi-cell circumferentially corrugated square tubes with cosine and triangular configurations , 2020 .

[39]  Q. Qin,et al.  Low-velocity impact of rectangular multilayer sandwich plates , 2019, Thin-Walled Structures.

[40]  Qing Li,et al.  Residual crashworthiness of CFRP structures with pre-impact damage – An experimental and numerical study , 2018, International Journal of Mechanical Sciences.

[41]  Xiaoyan Liang,et al.  Analytical Solutions for Large Deflections of Functionally Graded Beams Based on Layer-Graded Beam Model , 2018, International Journal of Applied Mechanics.

[42]  Norman Jones,et al.  Dynamic response of stiffened plates under repeated impacts , 2018, International Journal of Impact Engineering.

[43]  R. Kitey,et al.  Effect of through thickness metal layer distribution on the low velocity impact response of fiber metal laminates , 2018 .

[44]  S. Li,et al.  Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading , 2018 .

[45]  Q. Qin,et al.  Dynamic response of square sandwich plates with a metal foam core subjected to low-velocity impact , 2018 .

[46]  F. Qayyum,et al.  Effect of various surface preparation techniques on the delamination properties of vacuum infused Carbon fiber reinforced aluminum laminates (CARALL): Experimentation and numerical simulation , 2017 .

[47]  N. Jones.  Note on the impact behaviour of fibre-metal laminates , 2017 .

[48]  Guangyong Sun,et al.  Energy absorption mechanics for variable thickness thin-walled structures , 2017 .

[49]  M. Sadighi,et al.  An experimental study on the low velocity impact resistance of fibre metal laminates under successive impacts with reduced energies , 2017 .

[50]  S. Nauman,et al.  Investigation of fatigue crack growth rate in CARALL, ARALL and GLARE , 2017 .

[51]  P. Mahajan,et al.  Ballistic impact response of high strength aluminium alloy 2014-T652 subjected to rigid and deformable projectiles , 2017 .

[52]  Yuli Chen,et al.  Theoretical analysis on the collapse of dumbbell-shaped tubes , 2017 .

[53]  Guang Chen,et al.  Axial crushing theory of externally fiber-reinforced thin-walled twelve right-angle section tubes , 2016 .

[54]  Q. Qin,et al.  A Yield Criterion for Hybrid Asymmetric Metal Sandwich Structures and its Application , 2016 .

[55]  G. Newaz,et al.  Experimental and numerical investigation of flexural behavior of carbon fiber reinforced aluminum laminates , 2016 .

[56]  Jialing Yang,et al.  Theoretical analysis on quasi-static lateral compression of elliptical tube between two rigid plates , 2015 .

[57]  Q. Qin,et al.  A YIELD CRITERION AND PLASTIC ANALYSIS FOR PHYSICALLY ASYMMETRIC SANDWICH BEAM WITH METAL FOAM CORE , 2013 .

[58]  Javad Marzbanrad,et al.  Analytical and experimental studies on quasi-static axial crush behavior of thin-walled tailor-made aluminum tubes , 2012 .

[59]  B. Liaw,et al.  Thickness influence on ballistic impact behaviors of GLARE 5 fiber-metal laminated beams: Experimental and numerical studies , 2012 .

[60]  B. Liaw,et al.  Stacking Sequence and Geometrical Effects on Low-Velocity Impact Behaviors of GLARE 5 (3/2) Fiber–Metal Laminates , 2012 .

[61]  Onur Çoban,et al.  A review: Fibre metal laminates, background, bonding types and applied test methods , 2011 .

[62]  G. Bikakis,et al.  Dynamic response of circular GLARE fiber—metal laminates subjected to low velocity impact , 2011 .

[63]  Genevieve Langdon,et al.  Response of GLARE© panels to blast loading , 2009 .

[64]  G. Tsamasphyros,et al.  Analytical Modeling of Circular Glare Laminated Plates under Lateral Indentation , 2009 .

[65]  Said Rechak,et al.  Damage prediction in composite plates subjected to low velocity impact , 2008 .

[66]  V. Lopresto,et al.  A simple mechanistic model to predict the macroscopic response of fibreglass–aluminium laminates under low-velocity impact , 2007 .

[67]  P. Mallick,et al.  A numerical study on the quasi-static axial crush characteristics of square aluminum–composite hybrid tubes , 2006 .

[68]  Ik Hyeon Choi,et al.  Low-velocity impact analysis of composite laminates using linearized contact law , 2004 .

[69]  N. Jones.  On the Mass Impact Loading of Ductile Plates , 2003 .

[70]  A. Vlot,et al.  Impact Damage Resistance of Various Fibre Metal Laminates , 1997 .

[71]  A. Vlot,et al.  Impact properties of Fibre Metal Laminates , 1993 .

[72]  Philip G. Hodge,et al.  Crushing of a Tube Between Rigid Plates , 1963 .