Numerical Simulation of Macrosegregation in Continuously Cast Slab with Application of S-EMS and MR

[1]  T. Jing,et al.  Comparative Studies on a Chamfer Technology and a Convex Roll Technology During the Soft Reduction Process , 2023, Archives of Metallurgy and Materials.

[2]  Jiongming Zhang,et al.  Numerical Simulation Research and Application of Convex Roll for Efficient Soft Reduction of Continuous Casting Slab , 2022, Metallurgical and Materials Transactions B.

[3]  Lifeng Zhang,et al.  Effect of Mold Electromagnetic Stirring and Final Electromagnetic Stirring on the Solidification Structure and Macrosegregation in Bloom Continuous Casting , 2021, steel research international.

[4]  Jia-quan Zhang,et al.  A Numerical and Experimental Study on the Solidification Structure of Fe–Cr–Ni Steel Slab Casting by Roller Electromagnetic Stirring , 2020, Metals.

[5]  T. Jing,et al.  Controlling centre segregation and shrinkage cavities without internal crack in as-cast bloom of steel GCr15 induced by soft reduction technologies , 2020, Ironmaking & Steelmaking.

[6]  Miao‐yong Zhu,et al.  Numerical simulation of macrosegregation in continuously cast gear steel 20CrMnTi with final electromagnetic stirring , 2020, Journal of Iron and Steel Research International.

[7]  Haomiao Qiu,et al.  Numerical Simulation of Fluid Flow and Solidification in a Vertical Round Bloom Caster Using a Four-port SEN with Mold and Strand Electromagnetic Stirring , 2020, ISIJ International.

[8]  Xin Li,et al.  Effect of Electromagnetic Stirring on the Solidification Behavior of High-Magnetic-Induction Grain-Oriented Silicon Steel Continuous Casting Slab , 2020, JOM.

[9]  Miao‐yong Zhu,et al.  Numerical modelling of fluid flow and macrosegregation in a continuous casting slab with asymmetrical bulging and mechanical reduction , 2019, International Journal of Heat and Mass Transfer.

[10]  Zhu,et al.  Numerical Simulation of Solidification Behavior and Solute Transport in Slab Continuous Casting with S-EMS , 2019, Metals.

[11]  S. Luo,et al.  Numerical Simulation of Fluid Flow, Heat Transfer, Species Transfer, and Solidification in Billet Continuous Casting Mold with M-EMS , 2019, Metals.

[12]  Miao‐yong Zhu,et al.  Numerical simulation of slab centerline segregation with mechanical reduction during continuous casting process , 2018, International Journal of Heat and Mass Transfer.

[13]  B. Rogberg,et al.  Influence of soft reduction on the fluid flow, porosity and center segregation in CC high carbon- and stainless steel blooms , 2018 .

[14]  Y. Bao,et al.  Optimization of strand and final electromagnetic stirrers of round bloom casters with multiple sections , 2016, International Journal of Minerals, Metallurgy, and Materials.

[15]  Miao-yong Zhu,et al.  Thermo-Mechanical Behavior of the Continuous Casting Bloom in the Heavy Reduction Process , 2016 .

[16]  Yi Li,et al.  Development and Application of Final Permanent Magnet Stirring during Continuous Casting of High Carbon Rectangular Billet , 2015 .

[17]  Mujun Long,et al.  Numerical simulation of fluid flow and solidification in bloom continuous casting mould with electromagnetic stirring , 2015 .

[18]  Abdellah Kharicha,et al.  Modeling the Effects of Strand Surface Bulging and Mechanical Softreduction on the Macrosegregation Formation in Steel Continuous Casting , 2014, Metallurgical and Materials Transactions A.

[19]  Z. Cheng,et al.  Mathematical modelling of billet casting with secondary cooling zone electromagnetic stirrer , 2013 .

[20]  Hui Zhang,et al.  Numerical Simulation of Fluid Flow in a Round Bloom Mold with In-Mold Rotary Electromagnetic Stirring , 2012, Metallurgical and Materials Transactions B.

[21]  A. Ludwig,et al.  Using a Two-Phase Columnar Solidification Model to Study the Principle of Mechanical Soft Reduction in Slab Casting , 2012, Metallurgical and Materials Transactions A.

[22]  Jicheng He,et al.  Formation of internal cracks during soft reduction in rectangular bloom continuous casting , 2012, International Journal of Minerals, Metallurgy, and Materials.

[23]  V. Ludlow,et al.  Strategy to minimise central segregation in high carbon steel grades during billet casting , 2005 .

[24]  S. Kunstreich,et al.  Electromagnetic stirring for continuous casting - Part 2 , 2003 .

[25]  J. Drezet,et al.  Numerical simulation of deformation-induced segregation in continuous casting of steel , 2001 .

[26]  T. T. Natarajan,et al.  Finite element analysis of electromagnetically driven flow in sub-mold stirring of steel billets and slabs , 1998 .

[27]  Hideo Mori,et al.  Low superheat teeming with electromagnetic stirring , 1995 .

[28]  Karl-Heinz Spitzer,et al.  Flow fields in electromagnetic stirring of rectangular strands with linear inductors: Part I. theory and experiments with cold models , 1988 .

[29]  K. Schwerdtfeger,et al.  Flow fields in electromagnetic stirring of rectangular strands with linear inductors: Part II. computation of flow fields in billets, blooms, and slabs of steel , 1988 .

[30]  K. Schwerdtfeger,et al.  Macrosegregation in continuously cast steel slabs: preliminary theoretical investigation on the effect of steady state bulging , 1981 .

[31]  Li Gaosheng,et al.  Investigation of reduction pretreatment process for continuous casting , 2016 .

[32]  E. Pickering.  Macrosegregation in steel ingots: the applicability of modelling and characterisation techniques , 2013 .