Knowledge-based self-calibration method of calibration phantom by and for accurate robot-based CT imaging systems

[1]  Xinhua Li,et al.  A generic geometric calibration method for tomographic imaging systems with flat-panel detectors--a detailed implementation guide. , 2010, Medical physics.

[2]  M. Regier,et al.  Performance of cone-beam computed tomography and multidetector computed tomography in diagnostic imaging of the midface: A comparative study on Phantom and cadaver head scans , 2017, European Radiology.

[3]  W A Kalender,et al.  Simultaneous misalignment correction for approximate circular cone-beam computed tomography. , 2008, Physics in medicine and biology.

[4]  Weisi Lin,et al.  No-Reference Image Blur Assessment Based on Discrete Orthogonal Moments , 2016, IEEE Transactions on Cybernetics.

[5]  T Varslot,et al.  Reliable automatic alignment of tomographic projection data by passive auto-focus. , 2011, Medical physics.

[6]  Grace J Gang,et al.  Predicting image properties in penalized‐likelihood reconstructions of flat‐panel CBCT , 2019, Medical physics.

[7]  S Maur,et al.  Auto-calibration by locally consistent contours for dental CBCT , 2018, Physics in medicine and biology.

[8]  W. Zbijewski,et al.  Motion compensation in extremity cone-beam CT using a penalized image sharpness criterion , 2017, Physics in medicine and biology.

[9]  Ning Gu,et al.  A novel calibration method incorporating nonlinear optimization and ball‐bearing markers for cone‐beam CT with a parameterized trajectory , 2018, Medical physics.

[10]  Willi A Kalender,et al.  Geometric misalignment and calibration in cone-beam tomography. , 2004, Medical physics.

[11]  Zhaoying Bian,et al.  Multi-energy computed tomography reconstruction using a nonlocal spectral similarity model , 2019, Physics in medicine and biology.

[12]  Chaoning Zhang,et al.  DeepPTZ: Deep Self-Calibration for PTZ Cameras , 2020, 2020 IEEE Winter Conference on Applications of Computer Vision (WACV).

[13]  Dieter Filbert,et al.  Automated flaw detection in aluminum castings based on the tracking of potential defects in a radioscopic image sequence , 2002, IEEE Trans. Robotics Autom..

[14]  Jean Charles Bazin,et al.  DeepCalib: a deep learning approach for automatic intrinsic calibration of wide field-of-view cameras , 2018, CVMP '18.

[15]  Yubin Kuang,et al.  Deep Single Image Camera Calibration With Radial Distortion , 2019, 2019 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR).

[16]  E. Whaites,et al.  The potential applications of cone beam computed tomography in the management of endodontic problems. , 2007, International endodontic journal.

[17]  Chen-Gang,et al.  Review on kinematics calibration technology of serial robots , 2014 .

[18]  Xinhua Li,et al.  Sensitivity analysis of a geometric calibration method using projection matrices for digital tomosynthesis systems. , 2010, Medical physics.

[19]  Roger Y. Tsai,et al.  A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses , 1987, IEEE J. Robotics Autom..

[20]  W. Palmer,et al.  Using cone-beam CT as a low-dose 3D imaging technique for the extremities: initial experience in 50 subjects , 2015, Skeletal Radiology.

[21]  Haibing Bu,et al.  A Parameter Division Based Method for the Geometrical Calibration of X-Ray Industrial Cone-Beam CT , 2018, IEEE Access.

[22]  J. Boone,et al.  Dedicated breast CT: radiation dose and image quality evaluation. , 2001, Radiology.

[23]  K. Hoffmann,et al.  Self-calibration of a cone-beam micro-CT system. , 2008, Medical physics.

[24]  Tao Xu,et al.  A data-driven robotic Chinese calligraphy system using convolutional auto-encoder and differential evolution , 2019, Knowl. Based Syst..

[25]  Masahiro Hiraoka,et al.  Development of a four-dimensional image-guided radiotherapy system with a gimbaled X-ray head. , 2006, International journal of radiation oncology, biology, physics.

[26]  Weiming Shen,et al.  Learning to Calibrate Straight Lines for Fisheye Image Rectification , 2019, 2019 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR).

[27]  Biao Chen,et al.  Cone-beam volume CT breast imaging: feasibility study. , 2002, Medical physics.

[28]  Steeve Zozor,et al.  Online mobile C-arm calibration using inertial sensors: a preliminary study in order to achieve CBCT , 2019, International Journal of Computer Assisted Radiology and Surgery.

[29]  Yannick Hold-Geoffroy,et al.  A Perceptual Measure for Deep Single Image Camera Calibration , 2017, 2018 IEEE/CVF Conference on Computer Vision and Pattern Recognition.

[30]  J. Siewerdsen,et al.  Dedicated cone-beam CT system for extremity imaging. , 2014, Radiology.

[31]  N J Pelc,et al.  Alignment of a volumetric tomography system. , 2001, Medical physics.

[32]  A Uneri,et al.  A line fiducial method for geometric calibration of cone-beam CT systems with diverse scan trajectories , 2018, Physics in medicine and biology.

[33]  A Del Guerra,et al.  An optimization-based method for geometrical calibration in cone-beam CT without dedicated phantoms. , 2008, Physics in medicine and biology.

[34]  L. Xing,et al.  Overview of image-guided radiation therapy. , 2006, Medical dosimetry : official journal of the American Association of Medical Dosimetrists.

[35]  M. Oldham,et al.  Cone-beam-CT guided radiation therapy: technical implementation. , 2005, Radiotherapy and oncology : journal of the European Society for Therapeutic Radiology and Oncology.

[36]  S. G. Ponnambalam,et al.  Multi-objective hybrid algorithms for layout optimization in multi-robot cellular manufacturing systems , 2017, Knowl. Based Syst..

[37]  Chao Li,et al.  Kinematic Self-Calibration Method for Dual-Manipulators Based on Optical Axis Constraint , 2019, IEEE Access.

[38]  Ramesh R. Galigekere,et al.  Cone-beam reprojection using projection-matrices , 2003, IEEE Transactions on Medical Imaging.

[39]  Xiaochuan Pan,et al.  Investigation of iterative image reconstruction in low-dose breast CT , 2014, Physics in medicine and biology.

[40]  Alex ChiChung Kot,et al.  A Fast Approach for No-Reference Image Sharpness Assessment Based on Maximum Local Variation , 2014, IEEE Signal Processing Letters.

[41]  Wim Dewulf,et al.  Towards geometrical calibration of x-ray computed tomography systems—a review , 2015 .

[42]  Ilian A. Bonev,et al.  Kinematic calibration of a six-axis serial robot using distance and sphere constraints , 2015 .

[43]  Si-Lu Chen,et al.  A Plane Projection Based Method for Base Frame Calibration of Cooperative Manipulators , 2019, IEEE Transactions on Industrial Informatics.

[44]  Linghong Zhou,et al.  Simultaneous calibration phantom commission and geometry calibration in cone beam CT , 2017, Physics in medicine and biology.

[45]  S. Koskinen,et al.  CT arthrography of the wrist using a novel, mobile, dedicated extremity cone-beam CT (CBCT) , 2013, Skeletal Radiology.

[46]  Jun Yu,et al.  FishEyeRecNet: A Multi-Context Collaborative Deep Network for Fisheye Image Rectification , 2018, ECCV.

[47]  Xiaoquan Yang,et al.  Online Geometric Calibration of Cone-Beam Computed Tomography for Arbitrary Imaging Objects , 2013, IEEE Transactions on Medical Imaging.

[48]  Yiannis Kyriakou,et al.  Image features for misalignment correction in medical flat-detector CT. , 2012, Medical physics.

[49]  J. Wong,et al.  Flat-panel cone-beam computed tomography for image-guided radiation therapy. , 2002, International journal of radiation oncology, biology, physics.

[50]  Dandan Zheng,et al.  Estimation of CT cone-beam geometry using a novel method insensitive to phantom fabrication inaccuracy: implications for isocenter localization accuracy. , 2011, Medical physics.

[51]  C Zhang,et al.  Direct determination of cone-beam geometric parameters using the helical phantom , 2014, Physics in medicine and biology.

[52]  Fei Liu,et al.  Calibration method of robot base frame using unit quaternion form , 2015 .

[53]  David A Jaffray,et al.  Accurate technique for complete geometric calibration of cone-beam computed tomography systems. , 2005, Medical physics.

[54]  Frederic Noo,et al.  A local shift-variant Fourier model and experimental validation of circular cone-beam computed tomography artifacts. , 2009, Medical physics.

[55]  Jingyan Xu,et al.  A Graphical Method for Determining the In-Plane Rotation Angle in Geometric Calibration of Circular Cone-Beam CT Systems , 2012, IEEE Transactions on Medical Imaging.

[56]  R Clackdoyle,et al.  Analytic method based on identification of ellipse parameters for scanner calibration in cone-beam tomography. , 2000, Physics in medicine and biology.

[57]  Nassir Navab,et al.  Enhanced 3D-reconstruction algorithms for C-Arm based interventional procedures , 2000, IEEE Trans. Medical Imaging.

[58]  Kai Yang,et al.  A geometric calibration method for cone beam CT systems. , 2006, Medical physics.

[59]  Jeffrey H. Siewerdsen,et al.  Self-calibration of cone-beam CT geometry using 3D-2D image registration. , 2016, Physics in medicine and biology.

[60]  Ruben Pauwels,et al.  Cone beam CT for dental and maxillofacial imaging: dose matters. , 2015, Radiation protection dosimetry.

[61]  F Noo,et al.  The dual-ellipse cross vertex path for exact reconstruction of long objects in cone-beam tomography. , 1998, Physics in medicine and biology.