A skeletal gasoline flame ionization mechanism for combustion timing prediction on HCCI engines

Abstract Ion current sensing technology has the potential to be a low cost and real time combustion phasing solution for HCCI or HCCI-like engine control. Based on a primary reference fuel oxidation mechanism and a C1–C4 hydrocarbon flame ionization mechanism, a skeletal mechanism for gasoline flame ionization process prediction on HCCI engines was developed in this paper. Since the ion concentrations significantly affect the aroused ion current signals, the mechanism is targeted on accurately predicting both the ion production concentrations and other key combustion characteristics. Through the comparison with the results from the detailed gasoline flame ionization mechanism and experimental results, the predicted maximum hydronium (H3O+) ion concentration and the concentration variation tendency are validated. Additionally, the auto-ignition delay time (tign) accurately predicted under HCCI engine conditions. Through coupling with a 3D-CFD engine model, the skeletal mechanism was applied to predict the important information of in-cylinder ion species, which are validated by the experimental ion current amplitudes and phases. The results show that the ion current phase (Ion50) matches well with the positions where the predicted ion concentration reaches its maximum, and the ion current amplitudes are well predicted under the conditions of different equivalence ratios (Φ) and fuel injection ratios (Injratio).

[1]  M. Jia,et al.  Development of a skeletal mechanism for diesel surrogate fuel by using a decoupling methodology , 2015 .

[2]  M. Martínez-Sánchez,et al.  Counterflow nonpremixed flame DC displacement under AC electric field , 2015 .

[3]  R. Reitz,et al.  A comparative study on CFD simulation of spray penetration between gas jet and standard KIVA-3V spray model over a wide range of ambient gas densities , 2012 .

[4]  D. Dunn-Rankin,et al.  Numerical prediction of ion current from a small methane jet flame , 2009 .

[5]  Zhijun Wu,et al.  Study on the phase relation between ion current signal and combustion phase in an HCCI combustion engine , 2015 .

[6]  C. Westbrook,et al.  A Comprehensive Modeling Study of iso-Octane Oxidation , 2002 .

[7]  S. Aithal.  Prediction of Voltage Signature in a Homogeneous Charge Compression Ignition (HCCI) Engine Fueled with Propane and Acetylene , 2013 .

[8]  A. V. Tiggelen,et al.  Extraction of ions from a flame , 1957 .

[9]  Damon Honnery,et al.  A simplified mechanism for the prediction of the ion current during methane oxidation in engine-like conditions , 2015 .

[10]  G. Adomeit,et al.  Self-ignition of S.I. engine model fuels: A shock tube investigation at high pressure ☆ , 1997 .

[11]  Zhaolei Zheng,et al.  A new skeletal chemical kinetic model of gasoline surrogate fuel with nitric oxide in HCCI combustion , 2015 .

[12]  John B. Heywood,et al.  Two-stage ignition in HCCI combustion and HCCI control by fuels and additives , 2003 .

[13]  G.M. Shaver,et al.  Decoupled control of combustion timing and work output in residual-affected HCCI engines , 2005, Proceedings of the 2005, American Control Conference, 2005..

[14]  J. Prager,et al.  Modeling ion chemistry and charged species diffusion in lean methane–oxygen flames , 2007 .

[15]  Jacek Hunicz,et al.  An experimental study of negative valve overlap injection effects and their impact on combustion in a gasoline HCCI engine , 2014 .

[16]  C. Law,et al.  A directed relation graph method for mechanism reduction , 2005 .

[17]  Robert W. Dibble,et al.  Improving ion current of sparkplug ion sensors in HCCI combustion using sodium, potassium, and cesium acetates: Experimental and numerical modeling , 2015 .

[18]  A. Starik,et al.  Kinetics of Ion Formation in the Volumetric Reaction of Methane with Air , 2002 .

[19]  Robert W. Dibble,et al.  The effects of intake pressure, fuel concentration, and bias voltage on the detection of ions in a Homogeneous Charge Compression Ignition (HCCI) engine , 2009 .

[20]  Rolf Johansson,et al.  Ion Current Sensing for HCCI Combustion Feedback , 2003 .

[21]  Zhijun Wu,et al.  Method of ion current detection for HCCI combustion on SI/HCCI dual mode engine , 2009, 2009 IEEE Intelligent Vehicles Symposium.

[22]  H. F. Calcote.  Mechanisms for the formation of ions in flames , 1957 .

[23]  Jun Deng,et al.  Effect of Stratification on Ion Distribution in HCCI Combustion Using 3D-CFD with Detailed Chemistry , 2013 .

[24]  D. Bradley,et al.  Determination of positive-ion mobilities and collision cross sections in flame gases using electrostatic probes , 1974 .

[25]  Naeim A. Henein,et al.  Ion Current, Combustion and Emission Characteristics in an Automotive Common Rail Diesel Engine , 2010 .

[26]  Ingemar Denbratt,et al.  Ion Current Sensing in an Optical HCCI Engine with Negative Valve Overlap , 2007 .

[27]  T. Brinck,et al.  HCCI experiments with toluene reference fuels modeled by a semidetailed chemical kinetic model , 2008 .

[28]  Bengt Johansson,et al.  Fuel Effects on Ion Current in an HCCI Engine , 2005 .

[29]  Zhijun Wu,et al.  Study of the phase-varying mechanisms of ion current signals for combustion phasing in a gasoline HCCI engine , 2013 .

[30]  Javier Ballester,et al.  Diagnostic techniques for the monitoring and control of practical flames , 2010 .