A Moisture‐ and Oxygen‐Impermeable Separator for Aprotic Li‐O2 Batteries

Despite the unparalleled theoretical gravimetric energy, Li‐O2 batteries are still under a research stage because of their insufficient cycle lives. While the reversibility in air‐cathodes has been lately improved significantly by the deepened understanding on the electrode–electrolyte reaction and the integration of diverse catalysts, the stability of the Li metal interface has received relatively much less attention. The destabilization of the Li metal interface by crossover of water and oxygen from the air‐cathode side can indeed cause as fatal degradation for the cycle life as the irreversibility of the air‐cathodes. Here, it is reported that cheap poreless polyurethane separator can effectively suppress this crossover while allowing Li ions to diffuse through selectively. The polyurethane separator also protects Li metal anodes from redox mediators used for enhancing the reversibility of the air‐cathode reaction. Based on the Li metal protection, a persistent capacity of 600 mAh g−1 is preserved for more than 200 cycles. The current approach can be readily applicable to many other rechargeable batteries that suffer from similar interfacial degradation by side products from the other electrode.

[1]  A. Misra,et al.  Diffusion coefficients of water and leachables in methacrylate-based crosslinked polymers using absorption experiments , 2012, Journal of Materials Science: Materials in Medicine.

[2]  P. Bruce,et al.  Reactions in the rechargeable lithium-O2 battery with alkyl carbonate electrolytes. , 2011, Journal of the American Chemical Society.

[3]  Seoin Back,et al.  Improved reversibility in lithium-oxygen battery: Understanding elementary reactions and surface charge engineering of metal alloy catalyst , 2014, Scientific Reports.

[4]  Y. Park,et al.  Effect of multi-catalysts on rechargeable Li–air batteries , 2014 .

[5]  Dan Zhao,et al.  Reversibility of anodic lithium in rechargeable lithium–oxygen batteries , 2013, Nature Communications.

[6]  Dan Xu,et al.  Novel DMSO-based electrolyte for high performance rechargeable Li-O2 batteries. , 2012, Chemical communications.

[7]  V. Vakula,et al.  The role of diffusion phenomena in polymer‐to‐polymer adhesion , 1963 .

[8]  Sun Tai Kim,et al.  Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air , 2010 .

[9]  Jun Lu,et al.  A nanostructured cathode architecture for low charge overpotential in lithium-oxygen batteries , 2013, Nature Communications.

[10]  Byung Gon Kim,et al.  Wisdom from the Human Eye: A Synthetic Melanin Radical Scavenger for Improved Cycle Life of Li–O2 Battery , 2014 .

[11]  P. Doruker,et al.  Molecular simulations of gas transport in nitrile rubber and styrene butadiene rubber , 2006 .

[12]  Taewoo Kim,et al.  Superior rechargeability and efficiency of lithium-oxygen batteries: hierarchical air electrode architecture combined with a soluble catalyst. , 2014, Angewandte Chemie.

[13]  Jun Lu,et al.  The effect of oxygen crossover on the anode of a Li-O(2) battery using an ether-based solvent: insights from experimental and computational studies. , 2013, ChemSusChem.

[14]  R. Oréfice,et al.  Porous biodegradable polyurethane nanocomposites: preparation, characterization, and biocompatibility tests , 2010 .

[15]  Y. Bae,et al.  PDMS-based polyurethanes with MPEG grafts: synthesis, characterization and platelet adhesion study. , 1999, Biomaterials.

[16]  Hee-Dae Lim,et al.  Enhanced Power and Rechargeability of a Li−O2 Battery Based on a Hierarchical‐Fibril CNT Electrode , 2013, Advanced materials.

[17]  Stefan A Freunberger,et al.  The carbon electrode in nonaqueous Li-O2 cells. , 2013, Journal of the American Chemical Society.

[18]  Jong-Won Lee,et al.  Carbon-, binder-, and precious metal-free cathodes for non-aqueous lithium-oxygen batteries: nanoflake-decorated nanoneedle oxide arrays. , 2014, ACS applied materials & interfaces.

[19]  Jasim Uddin,et al.  A rechargeable Li-O2 battery using a lithium nitrate/N,N-dimethylacetamide electrolyte. , 2013, Journal of the American Chemical Society.

[20]  Yuhui Chen,et al.  A stable cathode for the aprotic Li-O2 battery. , 2013, Nature materials.

[21]  J. Nørskov,et al.  Twin Problems of Interfacial Carbonate Formation in Nonaqueous Li-O2 Batteries. , 2012, The journal of physical chemistry letters.

[22]  Soo-Jin Park,et al.  Optimization of Carbon‐ and Binder‐Free Au Nanoparticle‐Coated Ni Nanowire Electrodes for Lithium‐Oxygen Batteries , 2015 .

[23]  J. Choi,et al.  Poreless Separator and Electrolyte Additive for Lithium–Sulfur Batteries with High Areal Energy Densities , 2015 .

[24]  Dmitri Golberg,et al.  Multi-walled carbon nanotube papers as binder-free cathodes for large capacity and reversible non-aqueous Li–O2 batteries , 2013 .

[25]  Yuhui Chen,et al.  The lithium-oxygen battery with ether-based electrolytes. , 2011, Angewandte Chemie.

[26]  Linda F. Nazar,et al.  Screening for superoxide reactivity in Li-O2 batteries: effect on Li2O2/LiOH crystallization. , 2012, Journal of the American Chemical Society.

[27]  Sabu Thomas,et al.  Transport phenomena through polymeric systems , 2001 .

[28]  Xin-bo Zhang,et al.  Artificial Protection Film on Lithium Metal Anode toward Long‐Cycle‐Life Lithium–Oxygen Batteries , 2015, Advanced materials.

[29]  Haoshen Zhou,et al.  Gel-derived cation-π stacking films of carbon nanotube-graphene complexes as oxygen cathodes. , 2014, ChemSusChem.

[30]  Si Hyoung Oh,et al.  Synthesis of a metallic mesoporous pyrochlore as a catalyst for lithium–O2 batteries. , 2012, Nature chemistry.

[31]  V. Trnovcová,et al.  Martensitic α↔γ Phase Transition and Ionic Conductivity in "Pure" and Doped LiIO3 Single Crystals , 2005 .

[32]  Wu Xu,et al.  Optimization of Nonaqueous Electrolytes for Primary Lithium/Air Batteries Operated in Ambient Environment , 2009 .

[33]  Byung Gon Kim,et al.  Robust cycling of Li-O2 batteries through the synergistic effect of blended electrolytes. , 2013, ChemSusChem.

[34]  A. Aliev,et al.  Thermal conductivity of opal filled with a LiIO3 ionic conductor , 2003 .

[35]  E. Takeuchi,et al.  Abuse Testing of Lithium-Ion Batteries: Characterization of the Overcharge Reaction of LiCoO2/Graphite Cells , 2001 .

[36]  Hubert A. Gasteiger,et al.  The Effect of Water on the Discharge Capacity of a Non-Catalyzed Carbon Cathode for Li-O2 Batteries , 2012 .

[37]  Ping He,et al.  Core-shell-structured CNT@RuO(2) composite as a high-performance cathode catalyst for rechargeable Li-O(2) batteries. , 2014, Angewandte Chemie.

[38]  T. Gengenbach,et al.  Investigation of the capacity decay of a CdO–NaI mixed sorbent for pre-combustion CO2 capture , 2015 .

[39]  Yuyan Shao,et al.  Making Li‐Air Batteries Rechargeable: Material Challenges , 2013 .

[40]  D. J. Lee,et al.  Composite protective layer for Li metal anode in high-performance lithium–oxygen batteries , 2014 .

[41]  Yang Shao-Horn,et al.  Reactivity of carbon in lithium-oxygen battery positive electrodes. , 2013, Nano letters.

[42]  Haoshen Zhou,et al.  Carbon supported TiN nanoparticles: an efficient bifunctional catalyst for non-aqueous Li-O2 batteries. , 2013, Chemical communications.

[43]  Haoshen Zhou,et al.  A reversible long-life lithium–air battery in ambient air , 2013, Nature Communications.

[44]  T. Ishihara,et al.  Surface Coating Layer on Li Metal for Increased Cycle Stability of Li–O2 Batteries , 2014 .

[45]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[46]  Hye Ryung Byon,et al.  High-performance rechargeable lithium-iodine batteries using triiodide/iodide redox couples in an aqueous cathode , 2013, Nature Communications.

[47]  N. Dudney,et al.  Influence of Lithium Salts on the Discharge Chemistry of Li-Air Cells. , 2012, The journal of physical chemistry letters.

[48]  Ji‐Guang Zhang,et al.  Effects of Electrolyte Salts on the Performance of Li–O2 Batteries , 2013 .

[49]  Wu Xu,et al.  Stability of polymer binders in Li–O2 batteries , 2013 .

[50]  Jonathon R. Harding,et al.  Understanding the Chemical Stability of Polymers for Lithium–Air Batteries , 2015 .

[51]  H. Hiller.  In: Ullmann''''s Encyclopedia of Industrial Chemistry , 1989 .

[52]  Jun Chen,et al.  Rechargeable Lithium-Iodine Batteries with Iodine/Nanoporous Carbon Cathode. , 2015, Nano letters.

[53]  M. G. Mohamed,et al.  Electrical and mechanical properties of polyethylene–rubber blends , 1998 .

[54]  Subrata Mondal,et al.  Free volume and water vapor permeability of dense segmented polyurethane membrane , 2006 .

[55]  Doron Aurbach,et al.  A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions , 2002 .

[56]  Byung Gon Kim,et al.  A Lithium‐Sulfur Battery with a High Areal Energy Density , 2014 .

[57]  Sanjeev Mukerjee,et al.  Oxygen Electrode Rechargeability in an Ionic Liquid for the Li–Air Battery , 2011 .

[58]  Jung-Yong Lee,et al.  Wearable textile battery rechargeable by solar energy. , 2013, Nano letters.

[59]  P. Bruce,et al.  A Reversible and Higher-Rate Li-O2 Battery , 2012, Science.

[60]  S. Moon,et al.  Electrochemical properties of Li ion polymer battery with gel polymer electrolyte based on polyurethane , 2003 .

[61]  C. Wan,et al.  Review of gel-type polymer electrolytes for lithium-ion batteries , 1999 .

[62]  K. Amine,et al.  A metal-free, lithium-ion oxygen battery: a step forward to safety in lithium-air batteries. , 2012, Nano letters.

[63]  C. Tobias,et al.  Electrochemistry of Iodide in Propylene Carbonate I . Cyclic Voltammetry Monitored by Optical Spectroscopy , 1987 .

[64]  K. Edström,et al.  The SEI layer formed on lithium metal in the presence of oxygen: A seldom considered component in the development of the Li–O2 battery , 2013 .

[65]  Linda F. Nazar,et al.  Towards a Stable Organic Electrolyte for the Lithium Oxygen Battery , 2015 .

[66]  J. E. Mark,et al.  Clay nanolayer reinforcement of cis‐1,4‐polyisoprene and epoxidized natural rubber , 2001 .