Evaluation of elastic properties and temperature effects in Si thin films using an electrostatic microresonator

Laterally driven microresonators were used to estimate the temperature-dependent elastic modulus of single-crystalline Si for microelectromechanical systems (MEMS). The resonators were fabricated through surface micromachining from silicon-on-glass wafers. They were moved laterally by alternating electrostatic force at a series of frequencies, and then a resonance frequency was determined, under temperature cycling in the range of 25/spl deg/C to 600/spl deg/C, by detecting the maximum displacement. The elastic modulus was obtained in the temperature range by Rayleigh's energy method from the detected resonance frequency. At this time, the temperature dependency of elastic modulus was affected by surface oxidation as well as its intrinsic variation: a temperature cycle permanently reduces the resonance frequency. The effect of Si oxidation was analyzed for thermal cycling by applying a simple composite model to the measured frequency data; here the oxide thickness was estimated from the difference in the resonance frequency before and after the temperature cycle, and was confirmed by field-emission scanning electron microscopy. Finally, the temperature coefficient of the elastic modulus of Si in the direction was determined as -64/spl times/10/sup -6/[/spl deg/C/sup -1/]. This value was quite comparable to those reported in previous literatures, and much more so if the specimen temperature is calibrated more exactly.

[1]  David J. Green,et al.  An Introduction to the Mechanical Properties of Ceramics , 1998 .

[2]  L. Meirovitch.  Analytical Methods in Vibrations , 1967 .

[3]  William C. Tang,et al.  Laterally Driven Polysilicon Resonant Microstructures , 1989 .

[4]  Michael A. Huff,et al.  Heating Effects on The Young's Modulus of Films Sputtered onto Micromachined Resonators , 1998 .

[5]  Patricia M. Nieva,et al.  Determining the High-temperature Properties of Thin Films Using Bilayered Cantilevers , 1998 .

[6]  E. Arzt.  Size effects in materials due to microstructural and dimensional constraints: a comparative review , 1998 .

[7]  M. Fukuhara,et al.  Effects on High-Temperature-Elastic Properties on α-/β-Quartz Phase Transition of Fused Quartz , 1999 .

[8]  A. Z. Duijnhoven,et al.  Advanced modeling of silicon oxidation , 1998 .

[9]  Mehran Mehregany,et al.  Silicon carbide MEMS for harsh environments , 1998, Proc. IEEE.

[10]  Patricia M. Nieva,et al.  Thermal expansion coefficient of polycrystalline silicon and silicon dioxide thin films at high temperatures , 2000 .

[11]  H. J. Mcskimin.  Measurement of Elastic Constants at Low Temperatures by Means of Ultrasonic Waves–Data for Silicon and Germanium Single Crystals, and for Fused Silica , 1953 .

[12]  M. Madou.  Fundamentals of microfabrication , 1997 .

[13]  M. Fukuhara,et al.  Low temperature-elastic moduli, Debye temperature and internal dilational and shear frictions of fused quartz , 1997 .

[14]  Timothy P. Weihs,et al.  Mechanical deflection of cantilever microbeams: A new technique for testing the mechanical properties of thin films , 1988 .

[15]  C. Nguyen,et al.  Micromechanical resonators for oscillators and filters , 1995, 1995 IEEE Ultrasonics Symposium. Proceedings. An International Symposium.

[16]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[17]  Richard P. Vinci,et al.  Mechanical Properties in Small Dimensions , 2002 .

[18]  R. L. Edwards,et al.  Polysilicon Tensile Testing With Electrostatic Gripping , 1998 .

[19]  L. Tenerz,et al.  Fracture testing of silicon microelements in situ in a scanning electron microscope , 1988 .

[20]  R. Mullen,et al.  Mechanical properties of thick, surface micromachined polysilicon films , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[21]  J. Connally,et al.  Measurement of slow crack growth in silicon and nickel mechanical devices , 1993, [1993] Proceedings IEEE Micro Electro Mechanical Systems.

[22]  T. Tanaka,et al.  AFM bending testing of nanometric single crystal silicon wire at intermediate temperatures for MEMS , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[23]  B. Culshaw,et al.  Measurement of the mechanical properties of silicon microresonators , 1991 .