Passive vibration isolation of reaction wheel disturbances using a low frequency flexible space platform

Reaction wheel assemblies (RWAs) are momentum exchange devices used in fine pointing control of spacecrafts. Even though the spinning rotor of the reaction wheel is precisely balanced to minimize emitted vibration due to static and dynamic imbalances, precision instrument payloads placed in the neighborhood can always be severely impacted by residual vibration forces emitted by reaction wheel assemblies. The reduction of the vibration level at sensitive payloads can be achieved by placing the RWA on appropriate mountings. A low frequency flexible space platform consisting of folded continuous beams has been designed to serve as a mount for isolating a disturbance source in precision payloads equipped spacecrafts. Analytical and experimental investigations have been carried out to test the usefulness of the low frequency flexible platform as a vibration isolator for RWAs. Measurements and tests have been conducted at varying wheel speeds, to quantify and characterize the amount of isolation obtained from the reaction wheel generated vibration. These tests are further extended to other variants of similar design in order to bring out the best isolation for given disturbance loads. Both time and frequency domain analysis of test data show that the flexible beam platform as a mount for reaction wheels is quite effective and can be used in spacecrafts for passive vibration control. (C) 2011 Elsevier Ltd. All rights reserved.

[1]  Toshio Fukuda,et al.  Flexibility Control of Solar Battery Arrays : 3rd Report Vibration and Attitude Control with Consideration of the Dynamics of a Reaction Wheel as an Actuator , 1986 .

[2]  Michael Shao,et al.  Space Interferometry Mission: taking the measure of the universe , 1997, Other Conferences.

[3]  E.H. Anderson,et al.  Satellite ultraquiet isolation technology experiment (SUITE) , 2000, 2000 IEEE Aerospace Conference. Proceedings (Cat. No.00TH8484).

[4]  Robert A. Laskin.  Technology for Space Optical Interferometry , 1995 .

[5]  D. Kamesh,et al.  Modeling, design and analysis of low frequency platform for attenuating micro-vibration in spacecraft , 2010 .

[6]  Colin H. Hansen,et al.  Active control of vibration , 1996 .

[7]  L. F. Reschke,et al.  Line-of-sight performance improvement with reaction-wheel isolation , 1986 .

[8]  David Cunningham,et al.  Advanced 1.5 Hz Passive Viscous Isolation System , 1994 .

[9]  Zahidul H. Rahman,et al.  Vibration isolation and suppression system for precision payloads in space , 1999 .

[10]  Dimitris C. Lagoudas,et al.  AN EXPERIMENTAL INVESTIGATION OF SHAPE MEMORY ALLOY SPRINGS FOR PASSIVE VIBRATION ISOLATION , 2001 .

[11]  Stephen J. Chapman,et al.  MATLAB Programming for Engineers , 1999 .

[12]  D Kamesh.  Design And Analysis Of Flexible Beam Platform As Vibration Isolator For Space Applications , 2012 .

[13]  Marc Regelbrugge,et al.  Shape-memory alloy isolators for vibration suppression in space applications , 1995 .

[14]  Olivier L. de Weck,et al.  Structural Dynamics and Control for NGST - A Preliminary Study , 1998 .

[15]  Karl J. Pendergast,et al.  Use of a passive reaction wheel jitter isolation system to meet the Advanced X-Ray Astrophysics Facility imaging performance requirements , 1998, Astronomical Telescopes and Instrumentation.

[16]  L. Porter Davis,et al.  Second-generation hybrid D-strut , 1995, Smart Structures.

[17]  D. J. Mead.  Passive Vibration Control , 1999 .

[18]  E. Rivin.  Passive Vibration Isolation , 2003 .

[19]  nasa,et al.  An Evaluation of Reaction Wheel Emitted Vibrations for Large Space Telescope , 2013 .