Load parameter waveforms improvement of a stand-alone wind-based energy storage system and Takagi–Sugeno fuzzy logic algorithm
暂无分享,去创建一个
[1] P. Rodriguez,et al. Overview of the energy storage systems for wind power integration enhancement , 2010, 2010 IEEE International Symposium on Industrial Electronics.
[2] Ahmed M. Kassem,et al. Robust control of an isolated hybrid wind-diesel power system using Linear Quadratic Gaussian approach , 2011 .
[3] Corneliu Marinescu,et al. Control Structure for Single-Phase Stand-Alone Wind-Based Energy Sources , 2013, IEEE Transactions on Industrial Electronics.
[4] L.G. Franquelo,et al. Improving transition between power optimization and power limitation of variable speed, variable pitch wind turbines using fuzzy control techniques , 2000, 2000 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies.
[5] Ahmed M. Kassem. Robust voltage control of a stand alone wind energy conversion system based on functional model predictive approach , 2012 .
[6] Kamal Al-Haddad,et al. Comprehensive Study of Single-Phase AC-DC Power Factor Corrected Converters With High-Frequency Isolation , 2011, IEEE Transactions on Industrial Informatics.
[7] L. Barote,et al. Storage analysis for stand-alone wind energy applications , 2010, 2010 12th International Conference on Optimization of Electrical and Electronic Equipment.
[8] Weiqing Wang,et al. Fuzzy Control of Variable Speed Wind Turbine , 2006, 2006 6th World Congress on Intelligent Control and Automation.
[9] Tsorng-Juu Liang,et al. Analysis and Implementation of a Novel Bidirectional DC–DC Converter , 2012, IEEE Transactions on Industrial Electronics.
[10] Géza Joós,et al. An Online Control Algorithm for Application of a Hybrid ESS to a Wind–Diesel System , 2010, IEEE Transactions on Industrial Electronics.
[11] K. Strunz,et al. A review of hybrid renewable/alternative energy systems for electric power generation: Configurations, control and applications , 2011, 2012 IEEE Power and Energy Society General Meeting.
[12] Ahmed M. Kassem,et al. Modeling, Simulation and Performance Improvements of a PMSM Based on Functional Model Predictive Control , 2013 .
[13] Qiang Wu,et al. Integral Fuzzy Sliding Mode Control for Variable Speed Wind Power System , 2007, 2007 IEEE International Conference on Automation and Logistics.
[14] Jinsung Kim,et al. LMI-based design of stabilizing fuzzy controllers for nonlinear systems described by Takagi-Sugeno fuzzy model , 2001, Fuzzy Sets Syst..
[15] José Manuel Andújar Márquez,et al. A Methodology for Sizing Backup Fuel-Cell/Battery Hybrid Power Systems , 2010, IEEE Transactions on Industrial Electronics.
[16] Joachim Holtz. Pulsewidth modulation-a survey , 1992, IEEE Trans. Ind. Electron..
[17] Ahmed M. Kassem,et al. Dynamic modeling and robust power control of DFIG driven by wind turbine at infinite grid , 2013 .
[18] Ganapati Panda,et al. TS-fuzzy controller for UPFC in a multimachine power system , 2000 .
[19] S. Perera,et al. Standalone Operation of Wind Turbine-Based Variable Speed Generators With Maximum Power Extraction Capability , 2012, IEEE Transactions on Energy Conversion.
[20] Brian A. Fleck,et al. Comparative life-cycle assessment of a small wind turbine for residential off-grid use , 2009 .
[21] Eric Monmasson,et al. FPGAs in Industrial Control Applications , 2011, IEEE Transactions on Industrial Informatics.
[22] D. Edwards,et al. Lead-Acid Battery Model Under Discharge With a Fast Splitting Method , 2011, IEEE Transactions on Energy Conversion.
[23] Chunhua Liu,et al. An Efficient Wind–Photovoltaic Hybrid Generation System Using Doubly Excited Permanent-Magnet Brushless Machine , 2010, IEEE Transactions on Industrial Electronics.
[24] R. Teodorescu,et al. Stand-alone wind system with Vanadium Redox Battery energy storage , 2008, 2008 11th International Conference on Optimization of Electrical and Electronic Equipment.