Synergetic effect of GNPs and MgOs on the mechanical properties of Mg–Sr–Ca alloy

[1]  M. T. Parizi,et al.  Effect of graphene nanoplatelets content on the microstructural and mechanical properties of AZ80 magnesium alloy , 2019, Materials Science and Engineering: A.

[2]  M. T. Parizi,et al.  High mechanical efficiency, microstructure evaluation and texture of rheo-casted and extruded AZ80-Ca alloy reinforced with processed Al2O3/GNPs hybrid reinforcement , 2018, Materials Chemistry and Physics.

[3]  Yufeng Zheng,et al.  In vitro evaluation of MgSr and MgCaSr alloys via direct culture with bone marrow derived mesenchymal stem cells. , 2018, Acta biomaterialia.

[4]  A. E. Wilson-Heid,et al.  Mechanical and degradation property improvement in a biocompatible Mg-Ca-Sr alloy by thermomechanical processing. , 2018, Journal of the mechanical behavior of biomedical materials.

[5]  Yong Liu,et al.  Interfacial structure in AZ91 alloy composites reinforced by graphene nanosheets , 2018 .

[6]  Zhao-hui Wang,et al.  Ultra-high strengthening efficiency of graphene nanoplatelets reinforced magnesium matrix composites , 2018 .

[7]  Q. Lei,et al.  Regulating twin boundary mobility by annealing in magnesium and its alloys , 2017 .

[8]  M. T. Parizi,et al.  Optimizing and investigating influence of manufacturing techniques on the microstructure and mechanical properties of AZ80-0.5Ca-1.5Al2O3 nanocomposite , 2017 .

[9]  M. T. Parizi,et al.  Microstructure evaluations and mechanical properties of rheo-cast AZ80/Ca/Al2O3 nanocomposite after extrusion process , 2017 .

[10]  M. T. Parizi,et al.  Achieving extraordinary combination of strength and elongation of AZ80-0.5Ca alloy , 2017 .

[11]  Yunping Li,et al.  Impact of solute elements on detwinning in magnesium and its alloys , 2017 .

[12]  W. Haider,et al.  In vitro biodegradation, electrochemical corrosion evaluations and mechanical properties of an Mg/HA/TiO2 nanocomposite for biomedical applications , 2017 .

[13]  Xiaojun Wang,et al.  Graphene nanoplatelets induced heterogeneous bimodal structural magnesium matrix composites with enhanced mechanical properties , 2016, Scientific Reports.

[14]  F. Pan,et al.  High temperature formability of graphene nanoplatelets-AZ31 composites fabricated by stir-casting method , 2016 .

[15]  Yufeng Zheng,et al.  Stimulatory effects of the degradation products from Mg-Ca-Sr alloy on the osteogenesis through regulating ERK signaling pathway , 2016, Scientific Reports.

[16]  B. Xiao,et al.  Deformation and strengthening mechanisms of a carbon nanotube reinforced aluminum composite , 2016 .

[17]  S. Joshi,et al.  Effects of reinforcement morphology on the mechanical behavior of magnesium metal matrix composites based on crystal plasticity modeling , 2016 .

[18]  Huihui Yu,et al.  A new annealing hardening mechanism in pre-twinned Mg–3Al–1Zn alloy , 2016 .

[19]  F. Pan,et al.  High temperature mechanical behavior of AZ61 magnesium alloy reinforced with graphene nanoplatelets , 2016 .

[20]  Zaiji Zhan,et al.  Strengthening effect of graphene derivatives in copper matrix composites , 2016 .

[21]  F. Pan,et al.  Exploring mechanical behavior of Mg–6Zn alloy reinforced with graphene nanoplatelets , 2016 .

[22]  Y. Liu,et al.  Microstructure and mechanical properties of AZ91 alloy reinforced by carbon nanotubes coated with MgO , 2016 .

[23]  Shahrouz Zamani Khalajabadi,et al.  Fabrication, bio-corrosion behavior and mechanical properties of a Mg/HA/MgO nanocomposite for biomedical applications , 2015 .

[24]  F. Pan,et al.  Improved mechanical properties of magnesium–graphene composites with copper–graphene hybrids , 2015 .

[25]  S. Hussain,et al.  Improved strength and ductility of magnesium with addition of aluminum and graphene nanoplatelets (Al + GNPs) using semi powder metallurgy method , 2015 .

[26]  M. Gupta,et al.  Synthesis and characterization of high performance low volume fraction TiC reinforced Mg nanocomposites targeting biocompatible/structural applications , 2015 .

[27]  F. Pan,et al.  Powder metallurgy of Mg–1%Al–1%Sn alloy reinforced with low content of graphene nanoplatelets (GNPs) , 2014 .

[28]  F. Pan,et al.  Synergetic effect of graphene nanoplatelets (GNPs) and multi-walled carbon nanotube (MW-CNTs) on mechanical properties of pure magnesium , 2014 .

[29]  K. Nie,et al.  Microstructure and mechanical properties of SiCp/Mg–Al–Zn composites containing Mg17Al12 phases processed by low-speed extrusion , 2014 .

[30]  Woo Jin Kim,et al.  The effect of the addition of multiwalled carbon nanotubes on the uniform distribution of TiC nanoparticles in aluminum nanocomposites , 2014 .

[31]  S. Suwas,et al.  Effect of hybridizing micron-sized Ti with nano-sized SiC on the microstructural evolution and mechanical response of Mg–5.6Ti composite , 2013 .

[32]  A. Kontsos,et al.  The effect of strontium in plasticity of magnesium alloys , 2013 .

[33]  X. Ma,et al.  Microstructure, mechanical property and corrosion behavior of interpenetrating (HA+β-TCP)/MgCa composite fabricated by suction casting. , 2013, Materials science & engineering. C, Materials for biological applications.

[34]  Xiaogang Wang,et al.  Microstructure, mechanical property and corrosion behaviors of interpenetrating C/Mg-Zn-Mn composite fabricated by suction casting. , 2013, Materials Science and Engineering C: Materials for Biological Applications.

[35]  M. Pekguleryuz,et al.  Effect of strontium on the texture and mechanical properties of extruded Mg–1%Mn alloys , 2012 .

[36]  Xiaochun Li,et al.  Novel nanoprocessing route for bulk graphene nanoplatelets reinforced metal matrix nanocomposites , 2012 .

[37]  M. Gupta,et al.  Enhancing tensile and compressive strength of magnesium using ball milled Al+CNT reinforcement , 2012 .

[38]  M. Gupta,et al.  Using integrated hybrid (Al + CNT) reinforcement to simultaneously enhance strength and ductility of magnesium , 2011 .

[39]  Kyung-Mox Cho,et al.  Fabrication and mechanical properties of magnesium matrix composite reinforced with Si coated carbon nanotubes , 2011 .

[40]  M. Medraj,et al.  Thermodynamic modelling of the Mg–Ca, Mg–Sr, Ca–Sr and Mg–Ca–Sr systems using the modified quasichemical model , 2008 .

[41]  Manoj Gupta,et al.  Characterization of High Performance Mg/MgO Nanocomposites , 2007 .

[42]  Z. Ma,et al.  Enhanced mechanical properties of Mg–Al–Zn cast alloy via friction stir processing , 2007 .

[43]  M. Gupta,et al.  Development of novel carbon nanotube reinforced magnesium nanocomposites using the powder metallurgy technique , 2006 .

[44]  K. T. Kashyap,et al.  Strengthening in carbon nanotube/aluminium (CNT/Al) composites , 2005 .

[45]  G. Garcés,et al.  Effect of the extrusion texture on the mechanical behaviour of Mg–SiCp composites , 2005 .

[46]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .

[47]  A. Kelly,et al.  Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum , 1965 .