Experimental investigation of the hydroelastic and the structural response of a moored pontoon-type modular floating breakwater with flexible connectors

Abstract In this paper, 3D experiments are conducted aiming at the combined investigation of the hydroelastic and the structural (connectors' internal forces) response of a pontoon-type modular Floating Breakwater (FB), consisting of flexibly connected, moored with chains modules, under the action of perpendicular and oblique regular waves. Regarding the FB's hydroelastic response (i.e. 3D displacements of the modules under the wave action), video recording of the horizontal and the vertical displacements of specific points on the FB relatively to some fixed points is implemented, and this response is determined through an appropriate image processing procedure. For assessing the FB's structural response, strain rosettes are utilized, enabling the evaluation of the connectors' forces through the corresponding strains' measurements. The effect of the incident wave characteristics (period, height, obliquity) on the FB's hydroelastic and structural response is analyzed. The correlation between the connectors' forces and the FB's hydroelastic response is extensively discussed. The FB's hydroelastic and structural response depends strongly upon the wave period, while the wave height and obliquity affect this response in the low frequency range. Strong dependency of the connectors' forces upon the existence or not of a FB's intense deformed shape is demonstrated.

[1]  V. Sundar,et al.  The hydrodynamic behaviour of long floating structures in directional seas , 1995 .

[2]  You-sheng Wu,et al.  Nonlinear hydroelastic analysis of a moored floating body , 2003 .

[3]  Constantine Michailides,et al.  Response Analysis and Optimum Configuration of a Modular Floating Structure with Flexible Connectors , 2013 .

[4]  Barbara Zanuttigh,et al.  LOADS ON FLOATING BREAKWATERS: EFFECT OF LAYOUT UNDER IRREGULAR WAVES , 2009 .

[5]  Tetsuya Hiraishi,et al.  Experimental Validation of Hydroelastic Analysis of Pontoon-, Semisubmersible- and Hybrid-Type VLFS , 2008 .

[6]  J. N. Newman.  WAVE EFFECTS ON DEFORMABLE BODIES , 1994 .

[7]  Daniele Dessi,et al.  Experimental Investigation vs Numerical Simulation of the Dynamic Response of a Moored Floating Structure to Waves , 2003 .

[8]  Constantine Michailides,et al.  Hydroelastic analysis of a flexible mat-shaped floating breakwater under oblique wave action , 2012 .

[9]  B. Teng,et al.  Motion Response of Hinged Multiple Floating Bodies on Local Seabed , 2014 .

[10]  Eiichi Watanabe,et al.  Hydroelastic analysis of pontoon-type VLFS: a literature survey , 2004 .

[11]  Chien Ming Wang,et al.  Very Large Floating Structures , 2009 .

[12]  Eva Loukogeorgaki,et al.  3D Experimental and Numerical Investigation of the Performance of a Modular Floating Structure , 2015 .

[13]  Demos C. Angelides,et al.  Analysis of performance of hinged floating breakwaters , 2010 .

[14]  R. C. Ertekin,et al.  A comparative study of RMFC and FEA models for the wave-induced response of a MOB , 2000 .

[15]  Chan Ghee Koh,et al.  Hydroelastic response of very large floating structure with a flexible line connection , 2011 .

[17]  T. Sahoo,et al.  Wave interaction with multiple articulated floating elastic plates , 2009 .

[18]  Eiichi Watanabe,et al.  An eigenfunction expansion-matching method for analyzing the wave-induced responses of an elastic floating plate , 1995 .

[19]  Jang Whan Kim,et al.  On the hydroelastic behavior of two-dimensional articulated plates , 2000 .

[20]  J. Ferreras,et al.  Structural Performance of a Floating Breakwater for Different Mooring Line Typologies , 2014 .

[21]  Barbara Zanuttigh,et al.  EFFECT OF LAYOUT ON FLOATING BREAKWATER PERFORMANCE: RESULTS OF WAVE BASIN EXPERIMENTS , 2009 .

[22]  W. Cui,et al.  Hydroelastic analysis of flexible floating interconnected structures , 2007 .

[23]  Norman Jones,et al.  Tensile testing of a wire rope strand , 1985 .

[24]  Hisayoshi Endo,et al.  On the Hydroelastic Response of Box-Shaped Floating Structure with Shallow Draft , 1996 .

[25]  Demos C. Angelides,et al.  Modeling of cable-moored floating breakwaters connected with hinges , 2011 .

[26]  Sa Young Hong,et al.  Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses , 2007 .

[27]  M. Kabdaşli,et al.  3D Experimental investigation of the structural response and the effectiveness of a moored floating breakwater with flexibly connected modules , 2014 .

[28]  J. Ferreras,et al.  Experimental study on wave transmission coefficient, mooring lines and module connector forces with different designs of floating breakwaters , 2011 .

[29]  Michael Isaacson,et al.  Wave loads and motions of long structures in directional seas , 1986 .

[30]  C. Chaplin,et al.  Measurement of cyclic bending strains in steel wire rope , 2000 .

[31]  Barbara Zanuttigh,et al.  Wave basin experiments on floating breakwaters with different layouts , 2008 .

[32]  K. Iijima,et al.  Elastic response characteristics of a very large floating structure in waves moored inside a reef , 2003 .

[33]  Xiaochen Hao,et al.  Influence of hinged conditions on the hydroelastic response of compound floating structures , 2015 .