Controlling Thin-Film Stress and Wrinkling during Perovskite Film Formation

Significant effort has focused on controlling the deposition of perovskite films to enable uniform films, enabling efficiencies to climb dramatically. However, little attention has been paid to the evolution of thin-film stresses during deposition and the consequent effect on film morphology. While a textured surface topology has potential benefits for light scattering, a smooth surface is desirable to enable the pinhole-free deposition of contact layers. We show that the highly textured morphology made by popular antisolvent conversion methods arises because of in-plane compressive stress experienced during the intermediate phase of film formation where the substrate constrains the film from expanding—leading to energy release in the form of wrinkling, resulting in trenches that can be hundreds of nanometers deep with periods of several micrometers. We demonstrate that the extent of wrinkling is correlated with the rate of film conversion and that ultrasmooth films are obtained by slowing the rate of fil...

[1]  Yiming Li,et al.  Application of Cesium on the Restriction of Precursor Crystallization for Highly Reproducible Perovskite Solar Cells Exceeding 20% Efficiency. , 2018, ACS applied materials & interfaces.

[2]  T. Leijtens,et al.  Compositional Engineering for Efficient Wide Band Gap Perovskites with Improved Stability to Photoinduced Phase Segregation , 2018 .

[3]  Kai Zhu,et al.  Scalable fabrication of perovskite solar cells , 2018 .

[4]  Nripan Mathews,et al.  Effect of Cation Composition on the Mechanical Stability of Perovskite Solar Cells , 2018 .

[5]  Hao Li,et al.  CsSnI3: Semiconductor or metal? High electrical conductivity and strong near-infrared photoluminescence from a single material. High hole mobility and phase-transitions. , 2012, Journal of the American Chemical Society.

[6]  M. Johnston,et al.  Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells , 2014 .

[7]  Yan Yao,et al.  Solvent engineering towards controlled grain growth in perovskite planar heterojunction solar cells. , 2015, Nanoscale.

[8]  Laura M. Herz,et al.  Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber , 2013, Science.

[9]  K. Catchpole,et al.  Rubidium Multication Perovskite with Optimized Bandgap for Perovskite‐Silicon Tandem with over 26% Efficiency , 2017 .

[10]  Michael F Toney,et al.  Relationships between Lead Halide Perovskite Thin-Film Fabrication, Morphology, and Performance in Solar Cells. , 2016, Journal of the American Chemical Society.

[11]  Mohammad Khaja Nazeeruddin,et al.  One-Year stable perovskite solar cells by 2D/3D interface engineering , 2017, Nature Communications.

[12]  Anders Hagfeldt,et al.  Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance , 2016, Science.

[13]  Jonathan P. Mailoa,et al.  A 2-terminal perovskite/silicon multijunction solar cell enabled by a silicon tunnel junction , 2015 .

[14]  J. Noh,et al.  Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells. , 2013, Nano letters.

[15]  L. Freund,et al.  Thin Film Materials: Stress, Defect Formation and Surface Evolution , 2004 .

[16]  Anders Hagfeldt,et al.  Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c5ee03874j Click here for additional data file. , 2016, Energy & environmental science.

[17]  P. Flinn,et al.  Measurement and Interpretation of stress in aluminum-based metallization as a function of thermal history , 1987, IEEE Transactions on Electron Devices.

[18]  R. Dauskardt,et al.  Film stresses and electrode buckling in organic solar cells , 2012 .

[19]  H. Boyen,et al.  A Universal Deposition Protocol for Planar Heterojunction Solar Cells with High Efficiency Based on Hybrid Lead Halide Perovskite Families , 2016, Advanced materials.

[20]  Keith R. McIntosh,et al.  One‐dimensional photogeneration profiles in silicon solar cells with pyramidal texture , 2012 .

[21]  M. Green,et al.  Light trapping properties of pyramidally textured surfaces , 1987 .

[22]  Dongha Tahk,et al.  Elastic Moduli of Organic Electronic Materials by the Buckling Method , 2009 .

[23]  M. Green,et al.  The emergence of perovskite solar cells , 2014, Nature Photonics.

[24]  G. Stoney.  The Tension of Metallic Films Deposited by Electrolysis , 1909 .

[25]  Soon Moon Jeong,et al.  Light extraction from organic light-emitting diodes enhanced by spontaneously formed buckles , 2010 .

[26]  Philip Schulz,et al.  Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability , 2018 .

[27]  Bernd Rech,et al.  A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells , 2016, Science.

[28]  Rongrong Cheacharoen,et al.  Design and understanding of encapsulated perovskite solar cells to withstand temperature cycling , 2018 .

[29]  Federico Bella,et al.  Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers , 2016, Science.

[30]  Dieter Neher,et al.  Approaching the fill factor Shockley–Queisser limit in stable, dopant-free triple cation perovskite solar cells , 2017 .

[31]  L. Quan,et al.  Amide‐Catalyzed Phase‐Selective Crystallization Reduces Defect Density in Wide‐Bandgap Perovskites , 2018, Advanced materials.

[32]  Kai Zhu,et al.  Room-temperature crystallization of hybrid-perovskite thin films via solvent–solvent extraction for high-performance solar cells , 2015 .

[33]  Jinsong Huang,et al.  Strained hybrid perovskite thin films and their impact on the intrinsic stability of perovskite solar cells , 2017, Science Advances.

[34]  Yaohua Mai,et al.  Controllable Grain Morphology of Perovskite Absorber Film by Molecular Self-Assembly toward Efficient Solar Cell Exceeding 17%. , 2015, Journal of the American Chemical Society.

[35]  Adam D. Printz,et al.  Effect of heat, UV radiation, and moisture on the decohesion kinetics of inverted organic solar cells , 2017 .

[36]  Kai Zhu,et al.  Perovskite ink with wide processing window for scalable high-efficiency solar cells , 2017, Nature Energy.

[37]  Rebecca A. Belisle,et al.  Perovskite-perovskite tandem photovoltaics with optimized band gaps , 2016, Science.

[38]  Sang Il Seok,et al.  Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. , 2014, Nature materials.

[39]  Zhengshan J. Yu,et al.  Improved light management in planar silicon and perovskite solar cells using PDMS scattering layer , 2017 .

[40]  Sang Il Seok,et al.  High-performance photovoltaic perovskite layers fabricated through intramolecular exchange , 2015, Science.

[41]  Mirko Lohmann,et al.  Detailed Analysis of Random Pyramid Surfaces With Ray Tracing and Image Processing , 2016, IEEE Journal of Photovoltaics.

[42]  Yasumasa Okada,et al.  Precise determination of lattice parameter and thermal expansion coefficient of silicon between 300 and 1500 K , 1984 .

[43]  T. Edvinsson,et al.  Determination of Thermal Expansion Coefficients and Locating the Temperature-Induced Phase Transition in Methylammonium Lead Perovskites Using X-ray Diffraction. , 2015, Inorganic chemistry.

[44]  Nam-Gyu Park,et al.  Highly Reproducible Perovskite Solar Cells with Average Efficiency of 18.3% and Best Efficiency of 19.7% Fabricated via Lewis Base Adduct of Lead(II) Iodide. , 2015, Journal of the American Chemical Society.

[45]  Jonathan P. Mailoa,et al.  23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability , 2017, Nature Energy.

[46]  A. McCormick,et al.  Development and measurement of stress in polymer coatings , 2002 .

[47]  Kun Zhang,et al.  Retarding the crystallization of PbI2 for highly reproducible planar-structured perovskite solar cells via sequential deposition , 2014 .

[48]  P. Guduru,et al.  Tutorial: Understanding residual stress in polycrystalline thin films through real-time measurements and physical models , 2016 .

[49]  Zhiqiang Feng,et al.  Accelerated Lifetime Testing of Organic-Inorganic Perovskite Solar Cells Encapsulated by Polyisobutylene. , 2017, ACS applied materials & interfaces.

[50]  Tonio Buonassisi,et al.  Identifying defect-tolerant semiconductors with high minority-carrier lifetimes: beyond hybrid lead halide perovskites , 2015, 1504.02144.

[51]  Sung Min Cho,et al.  Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell , 2015 .

[52]  Qingfeng Dong,et al.  Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers , 2014 .