Enhanced mechanical properties of the high-resolution EUVL patterns of hybrid photoresists containing hexafluoroantimonate

[1]  K. Gonsalves,et al.  Organic–inorganic hybrid photoresists containing hexafluoroantimonate: design, synthesis and high resolution EUV lithography studies , 2017 .

[2]  C. Stafford,et al.  Mechanical Response of Thermally Annealed Nafion Thin Films. , 2016, ACS applied materials & interfaces.

[3]  K. Gonsalves,et al.  Design and development of low activation energy based nonchemically amplified resists (n-CARs) for next generation EUV lithography , 2016 .

[4]  Subrata Ghosh,et al.  Recent advances in non-chemically amplified photoresists for next generation IC technology , 2016 .

[5]  Subrata Ghosh,et al.  Design, development, EUVL applications and nano mechanical properties of a new HfO2 based hybrid non-chemically amplified resist , 2016 .

[6]  K. Gonsalves,et al.  Patterning highly ordered arrays of complex nanofeatures through EUV directed polarity switching of non chemically amplified photoresist , 2016, Scientific Reports.

[7]  F. Pérez-Murano,et al.  Assessing the Local Nanomechanical Properties of Self-Assembled Block Copolymer Thin Films by Peak Force Tapping. , 2015, Langmuir : the ACS journal of surfaces and colloids.

[8]  Yasin Ekinci,et al.  Platinum and palladium oxalates: positive-tone extreme ultraviolet resists , 2015 .

[9]  Mark Neisser,et al.  Low-line edge roughness extreme ultraviolet photoresists of organotin carboxylates , 2015 .

[10]  Li Li,et al.  Studying the Mechanism of Hybrid Nanoparticle Photoresists: Effect of Particle Size on Photopatterning , 2015 .

[11]  Weilun Chao,et al.  Revealing beam-induced chemistry using modulus mapping in negative-tone EUV/e-beam resists with and without cross-linker additives , 2015, Advanced Lithography.

[12]  Y. Ekinci,et al.  Beyond EUV lithography: a comparative study of efficient photoresists' performance , 2015, Scientific Reports.

[13]  L Wang,et al.  Single-digit-resolution nanopatterning with extreme ultraviolet light for the 2.5 nm technology node and beyond. , 2015, Nanoscale.

[14]  Takehiko Naruoka,et al.  Recent EUV Resists toward High Volume Manufacturing , 2014 .

[15]  P. Ashby,et al.  Harnessing entropic and enthalpic contributions to create a negative tone chemically amplified molecular resist for high-resolution lithography , 2014, Nanotechnology.

[16]  Jim Euchner.  Design , 2014, Catalysis from A to Z.

[17]  P. Claesson,et al.  Nanostructured composite layers of mussel adhesive protein and ceria nanoparticles. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[18]  T. Nishikubo,et al.  Synthesis and property of noria (water-wheel like macrocycle) derivatives with pendant alkoxyl and adamantyl ester groups, and their application for extreme ultraviolet resist , 2013 .

[19]  James M. Blackwell,et al.  Nanoscale modulus and surface chemistry characterization for collapse free resists , 2013, Advanced Lithography.

[20]  Roel Gronheid,et al.  Strength analysis of EUV-exposed photo resists by AFM at 40nm half pitch and below , 2012 .

[21]  M. Dokukin,et al.  On the Measurements of Rigidity Modulus of Soft Materials in Nanoindentation Experiments at Small Depth , 2012 .

[22]  J. Thackeray.  Materials challenges for sub-20-nm lithography , 2011 .

[23]  Ivan Pollentier,et al.  Chain scission resists for extreme ultraviolet lithography based on high performance polysulfone-containing polymers , 2011 .

[24]  Gregory J. Tallents,et al.  Optical lithography: Lithography at EUV wavelengths , 2010 .

[25]  Richard A. Lawson,et al.  High sensitivity nonchemically amplified molecular resists based on photosensitive dissolution inhibitors , 2010 .

[26]  Clifford L. Henderson,et al.  Comparison of positive tone versus negative tone resist pattern collapse behaviora) , 2010 .

[27]  C. Stafford,et al.  Manipulation of the elastic modulus of polymers at the nanoscale: influence of UV-ozone cross-linking and plasticizer. , 2010, ACS nano.

[28]  Markos Trikeriotis,et al.  High refractive index and high transparency HfO2 nanocomposites for next generation lithography , 2010 .

[29]  P. Nealey,et al.  Mechanical properties of antiplasticized polymer nanostructures , 2010 .

[30]  D. Sanders,et al.  Advances in patterning materials for 193 nm immersion lithography. , 2010, Chemical reviews.

[31]  Roger Fabian W. Pease,et al.  Lithography and Other Patterning Techniques for Future Electronics , 2008, Proceedings of the IEEE.

[32]  James Burke,et al.  Connections: Patterns of Discovery , 2009, J. Assoc. Inf. Sci. Technol..

[33]  Banqiu Wu,et al.  Extreme ultraviolet lithography: A review , 2007 .

[34]  Yasin Ekinci,et al.  Photon-beam lithography reaches 12.5nm half-pitch resolution , 2007 .

[35]  Junyan Dai,et al.  Molecular Glass Resists for High-Resolution Patterning , 2006 .

[36]  Bharat Bhushan,et al.  Hydrophobicity, adhesion, and friction properties of nanopatterned polymers and scale dependence for micro- and nanoelectromechanical systems. , 2005, Nano letters.

[37]  Andrew A. Bettiol,et al.  ION BEAM LITHOGRAPHY AND NANOFABRICATION: A REVIEW , 2005 .

[38]  J. Pablo,et al.  Evidence for size-dependent mechanical properties from simulations of nanoscopic polymeric structures , 2002 .

[39]  Carlos Fonseca,et al.  Optimum tone for various feature types: positive versus negative , 2001, SPIE Advanced Lithography.

[40]  Wolf-Dieter Domke,et al.  Comparison of resist collapse properties for deep ultraviolet and 193 nm resist platforms , 2000 .

[41]  Lauren V. Weatherdon,et al.  Quick Guide , 2005 .

[42]  C. Tanford.  Macromolecules , 1994, Nature.

[43]  Nobufumi Atoda,et al.  Mechanism of Resist Pattern Collapse during Development Process , 1993 .

[44]  T. Kozawa,et al.  Resist Materials and Processes for Extreme Ultraviolet Lithography , 2012 .

[45]  G.E. Moore,et al.  Cramming More Components Onto Integrated Circuits , 1998, Proceedings of the IEEE.