Assessment of low-viscosity oil performance and degradation in a heavy duty engine real-world fleet test

Low-viscosity engine oils (LVO) are considered as one of the most interesting solutions for improving fuel economy in internal combustion engines (ICE). There are different studies involving LVO and ICE, but currently limited data are available regarding “real-world” performance of LVO in a real service fleet. Included in a broadest study related with fuel consumption saving effects and performance of LVO in a real service fleet, the aim of this work is to present the results obtained in terms of comparative oil performance. So, on this test, a comparative analysis using 39 buses was performed, based on a deep and extensive oil analysis program to assess those aspects above mentioned. Two engine technologies (diesel and CNG) were considered and four different lubricants, two of them LVO and other two used as a reference baseline. The test duration comprised two oil drain intervals of 30,000 km each one, totalizing more than 2 million of kilometers accumulated. Results have shown that LVO presented an excellent performance along the oil drain interval (ODI), even improving some characteristics of the baseline oils with higher viscosity values. Results have shown that oil degradation is more dependent on engine technology, but in any case presented a penalization in terms of ODI reduction, a key indicator for end-users related with maintenance costs. In the case of CNG engines, higher oil degradation in terms of oil oxidation and nitration was observed.

[1]  Bernardo Tormos,et al.  Monitoring and analysing oil condition to generate maintenance savings: a case study in a CNG engine powered urban transport fleet , 2013 .

[2]  Hugh Spikes,et al.  The History and Mechanisms of ZDDP , 2004 .

[3]  Roland Larsson,et al.  Elastohydrodynamic Lubrication at Impact Loading , 1994 .

[4]  Aw Drews.  Standard Practice for Manual Sampling of Petroleum and Petroleum Products , 1998 .

[5]  Vicente Macián Martínez,et al.  Findings from a fleet test on the performance of two engine oil formulations in automotive CNG engines , 2015 .

[6]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[7]  Mike Brown,et al.  Extending SAE J300 to Viscosity Grades below SAE 20 , 2010 .

[8]  V. Macián,et al.  Evaluation of Used Lubricant Behaviour in Industrial Vehicles Engines in the 1990s , 2000 .

[9]  C. M. Taylor,et al.  Automobile Engine Tribology - Approaching the Surface , 2000 .

[10]  Bernardo Tormos,et al.  Proposal of an FTIR Methodology to Monitor Oxidation Level in Used Engine Oils: Effects of Thermal Degradation and Fuel Dilution , 2012 .

[11]  Aw Drews,et al.  Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration , 1998 .

[12]  R. Lewis,et al.  The effects of soot-contaminated engine oil on wear and friction: A review , 2008 .

[13]  L. Rudnick.  Lubricant Additives : Chemistry and Applications, Second Edition , 2009 .

[14]  Kenneth Holmberg,et al.  Global energy consumption due to friction in passenger cars , 2012 .

[15]  Trevor W. Miller,et al.  Optimizing Low Viscosity Lubricants for Improved Fuel Economy in Heavy Duty Diesel Engines , 2011 .

[16]  Z. Samaras,et al.  Experimental Evaluation of the Fuel Consumption and Emissions Reduction Potential of Low Viscosity Lubricants , 2009 .

[17]  Michael R. Sutton,et al.  Novel Fuel Efficiency Engine Lubricants for Urban Transit Applications , 2014 .

[18]  Jon Andersson,et al.  The Effect of Low Viscosity Oil on the Wear, Friction and Fuel Consumption of a Heavy Duty Truck Engine , 2013 .

[19]  M. Manni,et al.  Effect of Physical Characteristics of Lubricating Oils on Emissions, Fuel Economy and Oil Consumption in a Light Duty Diesel Engine , 1995 .

[20]  George E. Totten,et al.  Handbook of Lubrication and Tribology : Volume I Application and Maintenance, Second Edition , 2006 .

[21]  Bernardo Tormos,et al.  Analytical approach to wear rate determination for internal combustion engine condition monitoring based on oil analysis , 2003 .

[22]  Jeonghwan Kim,et al.  The Effect of Engine Oil on Particulate Matter, Emissions and Fuel Economy in Gasoline and Diesel Vehicle , 2014 .

[23]  Carlos Rodrigues Pereira Belchior,et al.  Lubricant viscosity and viscosity improver additive effects on diesel fuel economy , 2010 .

[24]  S. Q. Rizvi.  A Comprehensive Review of Lubricant Chemistry, Technology, Selection, and Design , 2009 .

[25]  L. Rudnick.  Lubricant Additives: Chemistry and Applications , 2007 .

[26]  J. Sander,et al.  The Use of Linear Sweep Voltammetry in Condition Monitoring of Diesel Engine Oil , 2011 .

[27]  Salvatore Florio,et al.  An Experimental Evaluation of the Impact of Ultra Low Viscosity Engine Oils on Fuel Economy and CO 2 Emissions , 2013 .

[28]  Bernardo Tormos,et al.  Potential of low viscosity oils to reduce CO2 emissions and fuel consumption of urban buses fleets , 2015 .

[29]  V. Macián,et al.  In-Use Comparison Test to Evaluate the Effect of Low Viscosity Oils on Fuel Consumption of Diesel and CNG Public Buses , 2014 .