Modeling of Spatiotemporal Thermal Response to CO2 Injection in Saline Formations: Interpretation for Monitoring

We evaluated the thermal processes with numerical simulation models that include processes of solid NaCl precipitation, buoyancy-driven multiphase SCCO2 migration, and potential non-isothermal effects. Simulation results suggest that these processes—solid NaCl precipitation, buoyancy effects, JT cooling, water vaporization, and exothermic SCCO2 reactions—are strongly coupled and dynamic. In addition, we performed sensitivity studies to determine how geologic (heat capacity, brine concentration, porosity, the magnitude and anisotropy of permeability, and capillary pressure) and operational (injection rate and injected SCCO2 temperature) parameters may affect these induced thermal disturbances. Overall, a fundamental understanding of potential thermal processes investigated through this research will be beneficial in the collection and analysis of temperature signals collectively measured from monitoring wells.

[1]  Eungyu Park,et al.  Evaluation of potential nonisothermal processes and heat transport during CO2 sequestration , 2010 .

[2]  George Albert Brown,et al.  Monitoring Alternating CO2 and Water Injection and Its Effect on Production in a Carbonate Reservoir Using Permanent Fiber-Optic Distributed Temperature Systems , 2004 .

[3]  J. Coxam,et al.  Enthalpy and solubility data of CO2 in water and NaCl(aq) at conditions of interest for geological sequestration , 2006 .

[4]  K. Pruess.  ECO2N: A TOUGH2 Fluid Property Module for Mixtures of Water, NaCl, and CO2 , 2005 .

[5]  Alfredo Battistelli,et al.  2D modeling of salt precipitation during the injection of dry CO2 in a depleted gas reservoir , 2007 .

[6]  Mohamed Azaroual,et al.  Numerical Simulations of the Thermal Impact of Supercritical CO2 Injection on Chemical Reactivity in a Carbonate Saline Reservoir , 2010 .

[7]  Karsten Pruess,et al.  Numerical studies of fluid leakage from a geologic disposal reservoir for CO2 show self‐limiting feedback between fluid flow and heat transfer , 2005 .

[8]  Simon A. Mathias,et al.  Analytical solution for Joule-Thomson cooling during CO2 geo-sequestration in depleted oil and gas reservoirs , 2010 .

[9]  Zhenhao Duan,et al.  An improved model calculating CO2 solubility in pure water and aqueous NaCl solutions from 273 to 533 K and from 0 to 2000 bar , 2003 .

[10]  David Belanger,et al.  Flow Profiling by Distributed Temperature Sensor (DTS) System - Expectation and Reality , 2006 .

[11]  Suzanne Hurter,et al.  P-T-ρ and two-phase fluid conditions with inverted density profile in observation wells at the CO2 storage site at Ketzin (Germany) , 2011 .

[12]  Karsten Pruess,et al.  O Mixtures in the Geological Sequestration of CO 2 . II . Partitioning in Chloride Brines at 12 − 100 ° C and up to 600 , 2004 .

[13]  K. Pruess,et al.  A Phase-Partitioning Model for CO2–Brine Mixtures at Elevated Temperatures and Pressures: Application to CO2-Enhanced Geothermal Systems , 2010 .

[14]  W. Kleinitz,et al.  The Precipitation of Salt in Gas Producing Wells , 2001 .

[15]  Karsten Pruess,et al.  CO2-H2O mixtures in the geological sequestration of CO2. I. Assessment and calculation of mutual solubilities from 12 to 100°C and up to 600 bar , 2003 .

[16]  K. Pruess,et al.  TOUGH2 User's Guide Version 2 , 1999 .

[17]  K. Pruess.  Numerical studies of fluid leakage from a geologic disposal reservoir for CO{sub 2} show self-limiting feedback between fluid flow and heat transfer - article no. L14404 , 2005 .

[18]  A. E. Mather,et al.  The Solubility of Carbon Dioxide in Water at Low Pressure , 1991 .

[19]  Luke D. Connell,et al.  Non-isothermal flow of carbon dioxide in injection wells during geological storage , 2008 .

[20]  V. V. Altunin,et al.  Thermophysical properties of carbon dioxide , 1968 .

[21]  Curtis M. Oldenburg,et al.  Joule-Thomson Cooling Due to CO2 Injection into Natural Gas Reservoirs , 2006 .

[22]  Yildiray Cinar,et al.  Impact of Capillary Pressure, Salinity and In situ Conditions on CO2 Injection into Saline Aquifers , 2010 .

[23]  Karsten Pruess,et al.  Formation dry‐out from CO2 injection into saline aquifers: 1. Effects of solids precipitation and their mitigation , 2009 .

[24]  S. Hurter,et al.  Thermal Signature of Free-Phase CO2 in Porous Rocks: Detectability of CO2 by Temperature Logging , 2007 .

[25]  Van Genuchten,et al.  A closed-form equation for predicting the hydraulic conductivity of unsaturated soils , 1980 .

[26]  K. Pruess,et al.  The simulator TOUGH2/EWASG for modelling geothermal reservoirs with brines and non-condensible gas , 1997 .

[27]  Andreas Kopp,et al.  Monitoring of CO2 plumes during storage in geological formations using temperature signals: Numerical investigation , 2008 .

[28]  O. F. Spencer,et al.  Natural gas engineering , 1954 .

[29]  G. J. Moridis,et al.  TOUGH2 User's Guide Version 2 - eScholarship , 1999 .

[30]  C. Oldenburg,et al.  Layered Thermohaline Convection in Hypersaline Geothermal Systems , 1998 .

[31]  W. Wagner,et al.  The IAPWS Formulation 1995 for the Thermodynamic Properties of Ordinary Water Substance for General and Scientific Use , 2002 .

[32]  Sally M. Benson,et al.  Measuring permanence of CO2 storage in saline formations: the Frio experiment , 2005 .

[33]  S. Mito,et al.  A monitoring framework for assessing underground migration and containment of carbon dioxide sequestered in an onshore aquifer , 2009 .

[34]  Julio E. Garcia.  Density of aqueous solutions of CO2 , 2001 .