The Design of Fatigue Test Machine and the Analysis of Fatigue Behavior of FSWed Dissimilar Aluminum Alloys
暂无分享,去创建一个
[1] H. Gökçe,et al. Investigation of Thrust Force, Drill Bit Temperature and Burr Height in the Drilling of Aluminum Alloy Used in Ammunition Wing Drive Systems , 2021, Experimental Techniques.
[2] Shun‐Peng Zhu,et al. Assessment of notch fatigue and size effect using stress field intensity approach , 2021 .
[3] L. Śnieżek,et al. Research on the Properties and Low Cycle Fatigue of Sc-Modified AA2519-T62 FSW Joint , 2020, Materials.
[4] V. Msomi,et al. Effect of material positioning on fatigue life of the friction stir processed dissimilar joints , 2020, Materials Research Express.
[5] S. L. Favaro,et al. Similar and dissimilar welding effect on the mechanical properties of 5383 H34, 5754 H34 and 6005 T6 aluminum alloys , 2020 .
[6] Ruijie Wang,et al. Study on fatigue strength of FSW joints of 5083 aluminum alloy with kissing bond defect , 2020 .
[7] J. Correia,et al. Numerical study of fatigue damage under random loading using rainflow cycle counting , 2020, International Journal of Structural Integrity.
[8] N. Kahraman,et al. Microstructure and mechanical properties of friction stir welded dissimilar 5754-H111-6013-T6 aluminum alloy joints , 2019, Materials Testing.
[9] S. Rahimi,et al. Unusual fatigue behavior of friction-stir welded Al–Mg–Si alloy , 2019, Materials Science and Engineering: A.
[10] D. Babich,et al. Structural-probabilistic modeling of fatigue failure under elastic-plastic deformation , 2019, International Journal of Structural Integrity.
[11] Bekir Çevik,et al. The effect of welding speed on mechanical and microstructural properties of 5754 Al (AlMg3) alloy joined by laser welding , 2018, Materials Research Express.
[12] D. L. Chen,et al. Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties , 2018 .
[13] Bekir Çevik,et al. Gas tungsten arc welding of 7075 aluminum alloy: microstructure properties, impact strength, and weld defects , 2018, Materials Research Express.
[14] Kai Wen,et al. Fatigue life of 7075-T651 aluminium alloy treated with vibratory stress relief , 2018 .
[15] V. Kannan,et al. Friction Stir Welding of Aluminium Alloys , 2017 .
[16] Gürel Çam,et al. Recent developments in joining of aluminum alloys , 2017 .
[17] Tarek A. Elsayed,et al. Weight reduction and strengthening of marine hatch covers by using composite materials , 2017 .
[18] Yinghua Lin,et al. The Effect of Heat Treatment on the Sensitized Corrosion of the 5383-H116 Al-Mg Alloy , 2017, Materials.
[19] B. Gülenç,et al. Friction Stir Welding of 7075-T651 Aluminium Alloy , 2016 .
[20] B. Gülenç,et al. Effect of tool material on microstructure and mechanical properties in friction stir welding , 2015 .
[21] G. Gou,et al. Characteristics of microstructure and fatigue resistance of hybrid fiber laser-MIG welded Al–Mg alloy joints , 2014 .
[22] Selcuk Mistikoglu,et al. Recent Developments in Friction Stir Welding of Al-alloys , 2014, Journal of Materials Engineering and Performance.
[23] E. Kaluç,et al. Mechanical, fatigue and microstructural properties of friction stir welded 5083-H111 and 6082-T651 aluminum alloys , 2014 .
[24] T. Pal,et al. High-cycle fatigue behavior of friction stir butt welded 6061 aluminium alloy , 2014 .
[25] V. Balasubramanian,et al. Statistical optimization and sensitivity analysis of friction stir spot welding process parameters for joining AA 7075 aluminum alloy , 2013, Experimental Techniques.
[26] D. K. Dwivedi,et al. Effect of welding parameters on microstructure and mechanical properties of friction stir welded joints of AA7039 aluminum alloy , 2012 .
[27] Ming Jen Tan,et al. Formability in AA5083 and AA6061 alloys for light weight applications , 2010 .
[28] Siamak Serajzadeh,et al. An Investigation into Microstructures and Mechanical Properties of AA7075-T6 during Friction Stir Welding at Relatively High Rotational Speeds , 2010 .
[29] Yufeng Sun,et al. Effect of gap on FSW joint formation and development of friction powder processing , 2010 .
[30] V. Balasubramanian,et al. Effect of process parameters on tensile strength of friction stir welded cast A356 aluminium alloy joints , 2009 .
[31] Antonino Squillace,et al. Effect of welding parameters on mechanical and microstructural properties of dissimilar AA6082–AA2024 joints produced by friction stir welding , 2009 .
[32] P.M.S.T. de Castro,et al. Fatigue behaviour of FSW and MIG weldments for two aluminium alloys , 2007 .
[33] M. N. James,et al. Weld tool travel speed effects on fatigue life of friction stir welds in 5083 aluminium , 2003 .
[34] Friedrich Dausinger,et al. Laser welding of aluminium lightweight materials: problems, solutions, readiness for application , 1995, Optical and Quantum Electronics.
[35] Bekir Çevik,et al. Effect of welding speed on the mechanical properties and weld defects of 7075 Al alloy joined by FSW , 2021, Metallic Materials.
[36] M. Koç,et al. The effects of welding speed on the microstructure and mechanical properties of marine-grade aluminium (AA5754) alloy welded using MIG welding , 2020, Metals and Materials.
[37] A. Şık,et al. The effect of friction stir welding parameters on microstructure and fatigue strength of CuZn37 brass alloys , 2017 .
[38] Yasuaki Naito,et al. Dissimilar Metal Joining Technologies for Steel Sheet and Aluminum Alloy Sheet in Auto Body , 2013 .
[39] A. Abdullah,et al. The Optimization Conditions of Friction Stir Welding (FSW) for Different Rotational and Weld speeds , 2013 .
[40] Surjya K. Pal,et al. Experimental Study on the Effect of Welding Parameters and Tool Pin Profiles on Mechanical Properties of the FSW Joints , 2013 .
[41] M. Szkodo,et al. Analysis of FSW welds made of aluminium alloy AW6082-T6 , 2007 .
[42] Marek Szkodo,et al. Friction Stir Welds (FSW) of aluminium alloy AW6082-T6 , 2007 .
[43] R. Sanders,et al. Industrial Development of Non-Heat Treatable Aluminum Alloys , 2004 .