Anomaly Detection and Classification in a Laser Powder Bed Additive Manufacturing Process using a Trained Computer Vision Algorithm

Abstract Despite the rapid adoption of laser powder bed fusion (LPBF) Additive Manufacturing by industry, current processes remain largely open-loop, with limited real-time monitoring capabilities. While some machines offer powder bed visualization during builds, they lack automated analysis capability. This work presents an approach for in-situ monitoring and analysis of powder bed images with the potential to become a component of a real-time control system in an LPBF machine. Specifically, a computer vision algorithm is used to automatically detect and classify anomalies that occur during the powder spreading stage of the process. Anomaly detection and classification are implemented using an unsupervised machine learning algorithm, operating on a moderately-sized training database of image patches. The performance of the final algorithm is evaluated, and its usefulness as a standalone software package is demonstrated with several case studies.

[1]  Robert F. Singer,et al.  In situ flaw detection by IR‐imaging during electron beam melting , 2012 .

[2]  Richard Leach,et al.  Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing , 2016 .

[3]  Gabriela Csurka,et al.  Visual categorization with bags of keypoints , 2002, eccv 2004.

[4]  B. Colosimo,et al.  Process defects and in situ monitoring methods in metal powder bed fusion: a review , 2017 .

[5]  Edward William Reutzel,et al.  Sensing for directed energy deposition and powder bed fusion additive manufacturing at Penn State University , 2016, SPIE LASE.

[6]  Masoumeh Aminzadeh,et al.  A machine vision system for in-situ quality inspection in metal powder-bed additive manufacturing , 2016 .

[7]  Steven W. Smith,et al.  The Scientist and Engineer's Guide to Digital Signal Processing , 1997 .

[8]  Dorian Schneider,et al.  High resolution imaging for inspection of Laser Beam Melting systems , 2013, 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

[9]  Jean-Pierre Kruth,et al.  Online Quality Control of Selective Laser Melting , 2011 .

[10]  Ryan B. Wicker,et al.  Integration of a thermal imaging feedback control system in electron beam melting , 2012 .

[11]  Tom Fawcett,et al.  An introduction to ROC analysis , 2006, Pattern Recognit. Lett..

[12]  Zhongliang Jing,et al.  Homography estimation from planar contours in image sequence , 2010 .

[13]  Karen M. Taminger,et al.  Electron Beam Freeform Fabrication (EBF3) for Cost Effective Near-Net Shape Manufacturing , 2006 .

[14]  Dorit Merhof,et al.  Detection of elevated regions in surface images from laser beam melting processes , 2015, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society.

[15]  S. Gold,et al.  In-process sensing in selective laser melting (SLM) additive manufacturing , 2016, Integrating Materials and Manufacturing Innovation.

[16]  Jan Bültmann,et al.  Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM) , 2011 .

[17]  Elizabeth A. Holm,et al.  Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks , 2016, JOM.

[18]  Geoffrey E. Hinton,et al.  Deep Learning , 2015, Nature.

[19]  G. Tapia,et al.  A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing , 2014 .

[20]  Brent Stucker,et al.  Layer by Layer Validation of Geometrical Accuracy in Additive Manufacturing Processes , 2013 .

[21]  David G. Lowe,et al.  Object recognition from local scale-invariant features , 1999, Proceedings of the Seventh IEEE International Conference on Computer Vision.

[22]  Krista A. Ehinger,et al.  SUN database: Large-scale scene recognition from abbey to zoo , 2010, 2010 IEEE Computer Society Conference on Computer Vision and Pattern Recognition.

[23]  A. Nassar,et al.  Flaw detection in powder bed fusion using optical imaging , 2017 .