The use of design of experiments for the evaluation of the production of surface rich activated carbon from sewage sludge via microwave and conventional pyrolysis

[1]  G. Zeng,et al.  Bio-char derived from sewage sludge by liquefaction: Characterization and application for dye adsorption , 2015 .

[2]  L. García-González,et al.  The use of experimental design and response surface methodologies for the synthesis of chemically activated carbons produced from bamboo , 2014 .

[3]  L. A. Féris,et al.  Comparison of a homemade cocoa shell activated carbon with commercial activated carbon for the removal of reactive violet 5 dye from aqueous solutions , 2014 .

[4]  Tao Lei,et al.  Effect of activator on the structure and desulphurization efficiency of sludge-activated carbon , 2014, Environmental technology.

[5]  K. Rezwan,et al.  Tailoring surfaces of hybrid ceramics for gas adsorption – From alkanes to CO2 , 2014 .

[6]  Jitian Song,et al.  Preparation of activated carbons from polycarbonate with chemical activation using response surface methodology , 2014 .

[7]  Kaimin Shih,et al.  Beneficial metal stabilization mechanisms using simulated sludge incineration ash for ceramic products , 2014 .

[8]  D. Angın,et al.  Influence of process parameters on the surface and chemical properties of activated carbon obtained from biochar by chemical activation. , 2013, Bioresource technology.

[9]  W. Daud,et al.  Comparison of oil palm shell-based activated carbons produced by microwave and conventional heating methods using zinc chloride activation , 2013 .

[10]  Chun He,et al.  Preparation and characterization of a hierarchical porous char from sewage sludge with superior adsorption capacity for toluene by a new two-step pore-fabricating process. , 2013, Bioresource technology.

[11]  Shang-Lien Lo,et al.  Sludge: A waste or renewable source for energy and resources recovery? , 2013 .

[12]  Evan Diamadopoulos,et al.  Biochar production by sewage sludge pyrolysis , 2013 .

[13]  Theodore T. Allen,et al.  Pareto charting using multifield freestyle text data applied to Toyota Camry user reviews , 2012 .

[14]  Xuejiang Wang,et al.  Adsorption of Copper (II) onto activated carbons from sewage sludge by microwave-induced phosphoric acid and zinc chloride activation , 2011 .

[15]  Chandrasekar Srinivasakannan,et al.  Process Optimization for the Preparation of Activated Carbon from Jatropha Hull Using Response Surface Methodology , 2011 .

[16]  J. D. Ekhe,et al.  Preparation and characterizations of microwave assisted activated carbons from industrial waste lignin for Cu(II) sorption , 2011 .

[17]  Liang Guo,et al.  Preparation and characterization of activated carbon from bamboo by microwave-induced phosphoric acid activation , 2010 .

[18]  Peng Wang,et al.  Modification of bamboo-based activated carbon using microwave radiation and its effects on the adsorption of methylene blue , 2010 .

[19]  Hui Deng,et al.  Preparation and characterization of activated carbon from cotton stalk by microwave assisted chemical activation--application in methylene blue adsorption from aqueous solution. , 2009, Journal of hazardous materials.

[20]  Z. Aktas,et al.  A novel method for production of activated carbon from waste tea by chemical activation with microwave energy , 2008 .

[21]  A. Dutta,et al.  Production of activated carbon from coconut shell: optimization using response surface methodology. , 2008, Bioresource technology.

[22]  Tie-hu Li,et al.  Preparation of activated carbons by microwave heating KOH activation , 2007 .

[23]  Filiz Karacan,et al.  Optimization of manufacturing conditions for activated carbon from Turkish lignite by chemical activation using response surface methodology , 2007 .

[24]  S. Leite,et al.  Biosorption of chromium using factorial experimental design , 2005 .

[25]  A. Lua,et al.  Effects of pyrolysis conditions on the properties of activated carbons prepared from pistachio-nut shells , 2004 .

[26]  W. L. Vasconcelos,et al.  Evaluation of the Influence of Microwaves in the Structure of Silica Gels , 2002 .

[27]  J. Tay,et al.  Strategy for minimization of excess sludge production from the activated sludge process. , 2001, Biotechnology advances.

[28]  K. Gubbins,et al.  Theoretical interpretation of adsorption behavior of simple fluids in slit pores , 1993 .

[29]  K. Sing.  Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984) , 1985 .

[30]  J. S. Hunter,et al.  Statistics for experimenters : an introduction to design, data analysis, and model building , 1979 .

[31]  E. Teller,et al.  ADSORPTION OF GASES IN MULTIMOLECULAR LAYERS , 1938 .

[32]  S. Theydan,et al.  Optimization of microwave preparation conditions for activated carbon from Albizia lebbeck seed pods for methylene blue dye adsorption , 2014 .

[33]  M. Muntean,et al.  STUDIES ON BUILDING CERAMICS MANUFACTURING BY INCORPORATING DRIED SLUDGE , 2014 .

[34]  Guanyi Chen,et al.  Preparation and characterization of carbonaceous adsorbents from sewage sludge using a pilot-scale microwave heating equipment , 2012 .

[35]  J. A. Menéndez,et al.  Microwave heating processes involving carbon materials , 2010 .

[36]  E. Barrett,et al.  (CONTRIBUTION FROM THE MULTIPLE FELLOWSHIP OF BAUGH AND SONS COMPANY, MELLOX INSTITUTE) The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms , 1951 .