Vibrations of telescopes can be successfully corrected in real time using a seismometer as an inertial reference. A prototype pendular seismometer is described that is suitable for angular vibration measurements at frequencies from a few tenths to several tens of Hz. The average pendulum position is maintained by a slow servo system that also damps its resonance. The prototype instrument has an rms noise of 3 milliarcsec in the 0–25-Hz band. It was tested on a 1-m telescope, and a good agreement of the seismometer signal with the direct optical measurements of the optical axis fluctuations of the telescope was found. A frequency response of the seismometer is studied, an expression for the rms amplitude of residual (uncompensated) vibrations is given. In space applications it is suggested that a pendular mirror in front of the telescope is used as an inertial reference for vibration correction.
[1]
Peter R. Gillingham.
Merits of inertial drives for ground-based optical telescopes
,
1990,
Astronomical Telescopes and Instrumentation.
[2]
Paul G. Richards,et al.
Quantitative Seismology: Theory and Methods
,
1980
.
[3]
Georges Asch,et al.
Les capteurs en instrumentations industrielle
,
1983
.
[4]
F. Merkle,et al.
High-resolution imaging by interferometry
,
1988
.
[5]
Bertrand Koehler.
VLT Unit Telescope suitability for interferometry: first results from acceptance tests on subsystems
,
1998,
Astronomical Telescopes and Instrumentation.