A new fault location method for distribution networks using sparse measurements

Abstract In response to the growing demand to improve reliability and quality of power supply, distributed monitoring devices are gradually being implemented in distribution networks. On the other hand, utilities are demanding more accurate and reliable fault location systems to reduce the economic impact of power outages. This paper presents a novel method that takes full advantage of all available measurements to provide an accurate fault location. The developed method first uses an iterative state estimation based algorithm to find the nearest node to the fault location. It then examines all lines connected to the selected node and locates the fault. The performance of the proposed method is studied by simulation tests on a real 13.8 kV, 134-node distribution system under different fault scenarios. The results verify the accuracy of the algorithm and its robustness even under uncertain measured data. The method robustly handles measurement errors, and is applicable to any distribution network with laterals, load taps and heterogeneous lines.

[1]  S. M. Brahma,et al.  Fault Location in Power Distribution System With Penetration of Distributed Generation , 2011, IEEE Transactions on Power Delivery.

[2]  Jen-Hao Teng,et al.  Automatic and Fast Faulted Line-Section Location Method for Distribution Systems Based on Fault Indicators , 2014, IEEE Transactions on Power Systems.

[3]  S. Johannessen.  Time synchronization in a local area network , 2004, IEEE Control Systems.

[4]  Mladen Kezunovic,et al.  Splified Algorithms for Removal of the Effect of Exponentially Decaying DC Offset on the Fourirer Algorithm , 2002, IEEE Power Engineering Review.

[5]  Yanfeng Gong,et al.  Integrated Fault Location System for Power Distribution Feeders , 2013, IEEE Transactions on Industry Applications.

[6]  Sang-Hee Kang,et al.  An intelligent and efficient fault location and diagnosis scheme for radial distribution systems , 2004 .

[7]  Mladen Kezunovic,et al.  Voltage Sag Data Utilization for Distribution Fault Location , 2011 .

[8]  J.-H. Teng.  Using voltage measurements to improve the results of branch-current-based state estimators for distribution systems , 2002 .

[9]  N. Schulz,et al.  Outage Management through AMR Systems Using an Intelligent Data Filter , 2001, IEEE Power Engineering Review.

[10]  Mladen Kezunovic,et al.  THE USE OF BIG DATA FOR OUTAGE MANAGEMENT IN DISTRIBUTION SYSTEMS , 2014 .

[11]  Joaquim Melendez,et al.  Comparison of impedance based fault location methods for power distribution systems , 2008 .

[12]  Jen-Hao Teng,et al.  A highly efficient algorithm in treating current measurements for the branch-current-based distribution state estimation , 2001 .

[13]  Sadegh Jamali,et al.  ACCURATE FAULT LOCATION METHOD IN DISTRIBUTION NETWORKS CONTAINING DISTRIBUTED GENERATIONS , 2011 .

[14]  Meshal Al-Shaher,et al.  FAULT LOCATION IN MULTI-RING DISTRIBUTION NETWORK USING ARTIFICIAL NEURAL NETWORK , 2003 .

[15]  D. Thukaram,et al.  Artificial neural network and support vector Machine approach for locating faults in radial distribution systems , 2005, IEEE Transactions on Power Delivery.

[16]  Mario Paolone,et al.  On the use of continuous-wavelet transform for fault location in distribution power systems , 2006 .

[17]  P.A. Crossley,et al.  Fault section identification and location on a distribution feeder using travelling waves , 2002, IEEE Power Engineering Society Summer Meeting,.

[18]  A.G. Phadke,et al.  Comparative testing of synchronized phasor measurement units , 2004, IEEE Power Engineering Society General Meeting, 2004..

[19]  Walmir Freitas,et al.  Fault Location in Distribution Systems Based on Smart Feeder Meters , 2014, IEEE Transactions on Power Delivery.

[20]  Zhengyou He,et al.  An ANFIS-based fault classification approach in power distribution system , 2013 .

[21]  A Borghetti,et al.  Integrated Use of Time-Frequency Wavelet Decompositions for Fault Location in Distribution Networks: Theory and Experimental Validation , 2010, IEEE Transactions on Power Delivery.

[22]  A. G. Expósito,et al.  Power system state estimation : theory and implementation , 2004 .

[23]  M. Kezunovic,et al.  Improved Fault Location on Distribution Feeders Based on Matching During-Fault Voltage Sags , 2009, IEEE Transactions on Power Delivery.

[24]  Kenneth E. Martin,et al.  Synchrophasor Measurements Under the IEEE Standard C37.118.1-2011 With Amendment C37.118.1a , 2015, IEEE Transactions on Power Delivery.

[25]  Francisco Santana,et al.  Optimal placement of faulted circuit indicators in power distribution systems , 2011 .

[26]  Yi Wang,et al.  Locating Phase-to-Ground Short-Circuit Faults on Radial Distribution Lines , 2007, IEEE Transactions on Industrial Electronics.

[27]  M. Kezunovic,et al.  A Systematic Approach for Ranking Distribution Systems Fault Location Algorithms and Eliminating False Estimates , 2013, IEEE Transactions on Power Delivery.

[28]  H. Tram.  Technical and operation considerations in using Smart Metering for outage management , 2008, 2008 IEEE/PES Transmission and Distribution Conference and Exposition.

[29]  M. Kezunovic,et al.  Enhancing Accuracy While Reducing Computation Complexity for Voltage-Sag-Based Distribution Fault Location , 2013, IEEE Transactions on Power Delivery.

[30]  H. Nouri,et al.  Comprehensive Distribution Network Fault Location Using the Distributed Parameter Model , 2011, IEEE Transactions on Power Delivery.