Pore Characteristics and Their Effects on the Material Properties of Foamed Concrete Evaluated Using Micro-CT Images and Numerical Approaches

Foamed concrete contains numerous pores inside the material, and these pores are a significant factor determining the material characteristics. In particular, the pore distribution characteristics of foamed concrete significantly affect its thermal and mechanical properties. Therefore, an appropriate investigation is necessary for a more detailed understanding of foamed concrete. Here, a set of foamed concrete samples with different densities is used in order to investigate the density effects on the pore characteristics, as well as the physical properties of the materials. The pore distribution characteristics of these samples are investigated using an X-ray micro-computed tomography (micro-CT) imaging technique with probabilistic and quantitative methods. Using these methods, the anisotropy, the pore circularity factor and the relative density of cell thickness are examined. The thermal (thermal conductivity) and mechanical (directional modulus and strength) properties of each foamed specimen are computed using numerical simulations and compared with experimental results. From the obtained results, the effects of the pore sizes and shapes on the local and global properties of the foamed concrete are examined for developing advanced foamed concrete with lower thermal conductivity by minimizing the strength reduction.

[1]  Wei She,et al.  Three-dimensional numerical modeling and simulation of the thermal properties of foamed concrete , 2014 .

[2]  T. Han,et al.  Reconstruction of random two-phase polycrystalline solids using low-order probability functions and evaluation of mechanical behavior , 2010 .

[3]  N. Thom,et al.  On void structure and strength of foamed concrete made without/with additives , 2015 .

[4]  Jong-Shin Huang,et al.  Production and properties of foamed reservoir sludge inorganic polymers , 2013 .

[5]  Omkar Deo,et al.  Characterizing pore volume, sizes, and connectivity in pervious concretes for permeability prediction , 2010 .

[6]  A. R. Videla,et al.  Watershed Functions Applied to a 3D Image Segmentation Problem for the Analysis of Packed Particle Beds , 2006 .

[7]  K. Ramamurthy,et al.  A classification of studies on properties of foam concrete , 2009 .

[8]  Characterisation of ALUHAB Aluminium Foams with Micro-CT , 2014 .

[9]  Andrew Dawson,et al.  On entrained pore size distribution of foamed concrete , 2015 .

[10]  Dejan Mumovic,et al.  Life cycle energy efficiency in building structures: A review of current developments and future outlooks based on BIM capabilities , 2017 .

[11]  Abang Abdullah Abang Ali,et al.  Properties and applications of foamed concrete; a review , 2015 .

[12]  K. Natesaiyer,et al.  X-ray CT imaging and finite element computations of the elastic properties of a rigid organic foam compared to experimental measurements: insights into foam variability , 2015, Journal of Materials Science.

[13]  Tae Hyung Lee,et al.  Investigation of the permeability of porous concrete reconstructed using probabilistic description methods , 2014 .

[14]  M. Stampanoni,et al.  3D experimental investigation of the microstructure of cement pastes using synchrotron X-ray microtomography (μCT) , 2007 .

[15]  K. Ramamurthy,et al.  Air‐void characterisation of foam concrete , 2007 .

[16]  Manuel Dierick,et al.  Practical use of the modified Bronnikov algorithm in micro-CT , 2009 .

[17]  T. Han,et al.  Effects of anisotropic voids on thermal properties of insulating media investigated using 3D printed samples , 2016 .

[18]  D. Stephan,et al.  Investigation of characteristics and responses of insulating cement paste specimens with Aer solids using X-ray micro-computed tomography , 2016 .

[19]  E. Kearsley,et al.  The effect of porosity on the strength of foamed concrete , 2002 .

[20]  Daniel B. Miracle,et al.  Quantitative characterization of spatial clustering in three-dimensional microstructures using two-point correlation functions , 2004 .

[21]  Martyn Jones,et al.  Characterization and simulation of microstructure and thermal properties of foamed concrete , 2013 .

[22]  A. Gokhale,et al.  Constraints on microstructural two-point correlation functions , 2005 .

[23]  E. Cerreta,et al.  Dimensional Quantification of Embedded Voids or Objects in Three Dimensions Using X-Ray Tomography , 2012, Microscopy and Microanalysis.

[24]  Tongsheng Zhang,et al.  Proportioning and characterization of Portland cement-based ultra-lightweight foam concretes , 2015 .

[25]  Zhongyuan Lu,et al.  Study on the preparation and properties of high-porosity foamed concretes based on ordinary Portland cement , 2016 .

[26]  N. Otsu.  A threshold selection method from gray level histograms , 1979 .

[27]  K. Youm,et al.  Evaluation of the anisotropy of the void distribution and the stiffness of lightweight aggregates using CT imaging , 2013 .

[28]  R. Dorey,et al.  Effect of pore clustering on the mechanical properties of ceramics , 2002 .

[29]  Fernando Pacheco-Torgal,et al.  Eco-efficient construction and building materials research under the EU Framework Programme Horizon 2020 , 2014 .

[30]  S. Torquato,et al.  Lineal-path function for random heterogeneous materials. , 1992, Physical review. A, Atomic, molecular, and optical physics.

[31]  M. Kamiński,et al.  Modelling of reinforced concrete structures and composite structures with concrete strength degradation taken into consideration , 2011 .

[32]  K. Ramamurthy,et al.  STRUCTURE AND PROPERTIES OF AERATED CONCRETE: A REVIEW , 2000 .

[33]  G. Charles Clifton,et al.  Effects of expanded polystyrene (EPS) particles on fire resistance, thermal conductivity and compressive strength of foamed concrete , 2016 .

[34]  H. Dumontet,et al.  Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concrete , 2009 .