Frontal Conversion and Uniformity in 3D Printing by Photopolymerisation

We investigate the impact of the non-uniform spatio-temporal conversion, intrinsic to photopolymerisation, in the context of light-driven 3D printing of polymers. The polymerisation kinetics of a series of model acrylate and thiol-ene systems, both neat and doped with a light-absorbing dye, is investigated experimentally and analysed according to a descriptive coarse-grained model for photopolymerisation. In particular, we focus on the relative kinetics of polymerisation with those of 3D printing, by comparing the evolution of the position of the conversion profile (zf) to the sequential displacement of the object stage (∆z). After quantifying the characteristic sigmoidal monomer-to-polymer conversion of the various systems, with a combination of patterning experiments, FT-IR mapping, and modelling, we compute representative regimes for which zf is smaller, commensurate with, or larger than ∆z. While non-monotonic conversion can be detrimental to 3D printing, for instance in causing differential shrinkage of inhomogeneity in material properties, we identify opportunities for facile fabrication of modulated materials in the z-direction (i.e., along the illuminated axis). Our simple framework and model, based on directly measured parameters, can thus be employed in photopolymerisation-based 3D printing, both in process optimisation and in the precise design of complex, internally stratified materials by coupling the z-stage displacement and frontal polymerisation kinetics.

[1]  Michael C. McAlpine,et al.  3D printed quantum dot light-emitting diodes. , 2014, Nano letters.

[2]  Hod Lipson,et al.  Fabricated: The New World of 3D Printing , 2013 .

[3]  Aliaa I. Shallan,et al.  Cost-effective three-dimensional printing of visibly transparent microchips within minutes. , 2014, Analytical chemistry.

[4]  J. Lewis,et al.  3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs , 2014, Advanced materials.

[5]  Role of heat generation and thermal diffusion during frontal photopolymerization. , 2015, Physical review. E, Statistical, nonlinear, and soft matter physics.

[6]  Christopher N Bowman,et al.  Thiol-ene click chemistry. , 2010, Angewandte Chemie.

[7]  Jack F Douglas,et al.  Frontal photopolymerization for microfluidic applications. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[8]  J. Lewis,et al.  3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.

[9]  Solution of a field theory model of frontal photopolymerization. , 2005, Physical review. E, Statistical, nonlinear, and soft matter physics.

[10]  John J. Vericella,et al.  Three‐Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness , 2014 .

[11]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[12]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[13]  O. Matar,et al.  Interfacial Profile and Propagation of Frontal Photopolymerization Waves , 2015 .

[14]  J. Douglas,et al.  Propagating waves of network formation induced by light , 2005 .

[15]  Wei Chen,et al.  3D printing of versatile reactionware for chemical synthesis , 2016, Nature Protocols.

[16]  Davide Comoretto,et al.  Polymer Distributed Bragg Reflectors for Vapor Sensing , 2015 .

[17]  Jeffrey W Stansbury,et al.  3D printing with polymers: Challenges among expanding options and opportunities. , 2016, Dental materials : official publication of the Academy of Dental Materials.

[18]  O. Matar,et al.  A Unified Approach for Patterning via Frontal Photopolymerization , 2015, Advanced materials.

[19]  Howon Lee,et al.  Ultralight, ultrastiff mechanical metamaterials , 2014, Science.

[20]  J. Lewis,et al.  Device fabrication: Three-dimensional printed electronics , 2015, Nature.

[21]  Anthony Atala,et al.  Biomaterials for Integration with 3-D Bioprinting , 2014, Annals of Biomedical Engineering.

[22]  Daniel M. Vogt,et al.  Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers , 2014, Advanced materials.

[23]  Paulo Jorge Da Silva bartolo,et al.  3D bioprinting of photocrosslinkable hydrogel constructs , 2015 .

[24]  R. Hague,et al.  Laser sintering of polyamides and other polymers , 2012 .

[25]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .

[26]  Philip J. Kitson,et al.  Integrated 3D-printed reactionware for chemical synthesis and analysis. , 2012, Nature chemistry.

[27]  T. Alan Hatton,et al.  Modeling of Oxygen-Inhibited Free Radical Photopolymerization in a PDMS Microfluidic Device , 2008 .

[28]  P. Yang,et al.  Widely Tunable Distributed Bragg Reflectors Integrated into Nanowire Waveguides. , 2015, Nano letters.

[29]  John R. Tumbleston,et al.  Continuous liquid interface production of 3D objects , 2015, Science.

[30]  M. Layani,et al.  3D Printing of Shape Memory Polymers for Flexible Electronic Devices , 2016, Advanced materials.

[31]  M. Padgett,et al.  Development of a 3D printer using scanning projection stereolithography , 2015, Scientific Reports.

[32]  Leroy Cronin,et al.  3D printed flow plates for the electrolysis of water: an economic and adaptable approach to device manufacture , 2014 .

[33]  R. Inführ,et al.  Photopolymers for rapid prototyping , 2007 .

[34]  Robert Liska,et al.  Vinyl esters: Low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturing , 2009 .

[35]  X. Duan,et al.  Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery. , 2015, Chemical Society reviews.

[36]  Ali Khademhosseini,et al.  3D biofabrication strategies for tissue engineering and regenerative medicine. , 2014, Annual review of biomedical engineering.

[37]  Bethany C Gross,et al.  Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. , 2014, Analytical chemistry.