Optimal simplified thermal models of building envelope based on frequency domain regression using genetic algorithm

Simple and effective building energy models are essentially needed for many applications, such as building performance diagnosis and optimal control, etc. The energy model involves two important parts of building components, i.e., building envelopes and building internal mass. This paper presents a methodology for parameter optimization of 3R2C thermal network model of building envelopes (composed of three resistances and two capacitances) based on frequency domain regression using genetic algorithm (GA). First, the theoretical frequency characteristics of heat transfer through building envelope are calculated using detailed physical description within the frequency range of concern. Second, the frequency characteristics of the simplified 3R2C model are calculated with random values of individual resistances and capacitances which constrain to total thermal resistance and capacitance. Then, the errors between the theoretical frequency characteristics and the frequency characteristics of the simplified model are calculated. Finally, GA estimator is developed to optimize the parameters of the simplified model, allowing the frequency responses of the simplified model match the actual heat transfer through building envelope the best. Various case studies are conducted also to validate the parameter optimization method of the simplified 3R2C model. The accuracy of simplified models for constructions of different weights is studied.

[1]  T. Nussbaumer,et al.  Thermal analysis of a wooden door system with integrated vacuum insulation panels , 2005 .

[2]  James E. Braun,et al.  Evaluating the Performance of Building Thermal Mass Control Strategies , 2001 .

[3]  G. P. Mitalas.  Calculation of transient heat flow through walls and roofs , 1968 .

[4]  Jonathan A. Wright,et al.  Optimization of building thermal design and control by multi-criterion genetic algorithm , 2002 .

[5]  Shengwei Wang,et al.  Simplified building model for transient thermal performance estimation using GA-based parameter identification , 2006 .

[6]  Linda Barelli,et al.  Development of an energetic diagnosis method for the buildings: example of the Perugia University , 2004 .

[7]  Surapong Chirarattananon,et al.  A technical review of energy conservation programs for commercial and government buildings in Thailand , 2003 .

[8]  Melanie Mitchell,et al.  An introduction to genetic algorithms , 1996 .

[9]  F. X. Litt,et al.  Optimal control applied to air conditioning in buildings , 1984 .

[10]  Youming Chen,et al.  A neural-network-based experimental technique for determining z-transfer function coefficients of a building envelope , 2000 .

[11]  John Mitchell,et al.  Transfer Functions for Efficient Calculation of Multidimensional Transient Heat Transfer , 1989 .

[12]  Vice President,et al.  AMERICAN SOCIETY OF HEATING, REFRIGERATION AND AIR CONDITIONING ENGINEERS INC. , 2007 .

[13]  Youming Chen,et al.  A novel and simple building load calculation model for building and system dynamic simulation , 2001 .

[14]  James E. Braun,et al.  An Inverse Gray-Box Model for Transient Building Load Prediction , 2002 .

[15]  James E. Braun,et al.  Application of building precooling to reduce peak cooling requirements , 1997 .

[16]  Chi-Tsong Chen.  System and Signal Analysis , 1988 .

[17]  D. G. Stephenson,et al.  Cooling load calculations by thermal response factor method , 1967 .

[18]  Göran Hed,et al.  Mathematical modelling of PCM air heat exchanger , 2006 .

[19]  Emmanuel Rey,et al.  Office building retrofitting strategies: multicriteria approach of an architectural and technical issue , 2004 .

[20]  Shengwei Wang,et al.  Hybrid Model for Building Performance Diagnosis and Optimal Control , 2003 .

[21]  Abdullatif Ben-Nakhi,et al.  Cooling load prediction for buildings using general regression neural networks , 2004 .

[22]  Shengwei Wang,et al.  Model-based optimal control of VAV air-conditioning system using genetic algorithm , 2000 .

[23]  Drury B. Crawley,et al.  EnergyPlus: Energy simulation program , 2000 .