The calculation of adhesive fracture energies in mode I: revisiting the tapered double cantilever beam (TDCB) test
暂无分享,去创建一个
J. G. Williams | Homayoun Hadavinia | Anthony J. Kinloch | Bamber R.K. Blackman | J. Williams | A. Kinloch | H. Hadavinia | B. Blackman | M. Paraschi | M. Paraschi
[1] F. L. Matthews,et al. Predicting Progressive Delamination of Composite Material Specimens via Interface Elements , 1999 .
[2] J. G. Williams,et al. Fracture Mechanics Testing Methods for Polymers, Adhesives and Composites , 2001 .
[3] J. Williams. End corrections for orthotropic DCB specimens , 1989 .
[4] John A. Nairn,et al. Energy release rate analysis for adhesive and laminate double cantilever beam specimens emphasizing the effect of residual stresses , 2000 .
[5] J. Hutchinson,et al. The influence of plasticity on mixed mode interface toughness , 1993 .
[6] A. Needleman. A Continuum Model for Void Nucleation by Inclusion Debonding , 1987 .
[7] J. Hutchinson,et al. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids , 1992 .
[8] M. F. Kanninen,et al. An augmented double cantilever beam model for studying crack propagation and arrest , 1973, International Journal of Fracture.
[9] J. G. Williams,et al. Analytical solutions for cohesive zone models , 2002 .
[10] A. Kinloch,et al. Fracture tests on structural adhesive joints , 2001 .
[11] M. F. Kanninen,et al. A dynamic analysis of unstable crack propagation and arrest in the DCB test specimen , 1974 .
[12] Anthony J. Kinloch,et al. Measuring the mode I adhesive fracture energy, GIC, of structural adhesive joints: the results of an international round-robin , 2003 .