Durability of CFRP Strengthened Steel Plates Under Wet and Dry Cycles

[1]  Yu Bai,et al.  Fatigue performance of CFRP patched pre-cracked steel plates after extreme environmental exposure , 2016 .

[2]  Guang-chong Qin,et al.  Study on the degradation of mechanical properties of corroded steel plates based on surface topography , 2016 .

[3]  Xiaojing Li,et al.  Study of the Tensile Properties of CFRP Strengthened Steel Plates , 2015 .

[4]  Yu Bai,et al.  Bond durability of fatigued CFRP-steel double-lap joints pre-exposed to marine environment , 2015 .

[5]  Alain Nussbaumer,et al.  Fatigue design criteria for strengthening metallic beams with bonded CFRP plates , 2015 .

[6]  M. Motavalli,et al.  Normal, high and ultra-high modulus carbon fiber-reinforced polymer laminates for bonded and un-bonded strengthening of steel beams , 2015 .

[7]  M. Motavalli,et al.  Lateral-torsional buckling of steel I-beams retrofitted by bonded and un-bonded CFRP laminates with different pre-stress levels: Experimental and numerical study , 2015 .

[8]  J. Ou,et al.  Mechanical Behavior of BFRP-Steel Composite Plate under Axial Tension , 2014 .

[9]  Riadh Al-Mahaidi,et al.  Durability of steel/CFRP double strap joints exposed to sea water, cyclic temperature and humidity , 2012 .

[10]  Sami H. Rizkalla,et al.  Environmental durability of a CFRP system for strengthening steel structures , 2010 .

[11]  Riadh Al-Mahaidi,et al.  Experimental study of fatigue crack growth behaviour in adhesively reinforced steel structures , 2009 .

[12]  Carlo Poggi,et al.  Fatigue performance of tensile steel members strengthened with CFRP plates , 2009 .

[13]  Sami H. Rizkalla,et al.  Flexural Strengthening of Steel Bridges with High Modulus CFRP Strips , 2008 .

[14]  X. Zhao,et al.  State-of-the-art review on FRP strengthened steel structures , 2007 .

[15]  Carlo Poggi,et al.  Strengthening of tensile steel members and bolted joints using adhesively bonded CFRP plates , 2006 .

[16]  L. Hollaway,et al.  Strengthening of an artificially degraded steel beam utilising a carbon/glass composite system , 2006 .

[17]  Terry J Wipf,et al.  Repair of Steel Composite Beams with Carbon Fiber-Reinforced Polymer Plates , 2004 .

[18]  Hamid Saadatmanesh,et al.  Repair of damaged steel-concrete composite girders using carbon fiber-reinforced polymer sheets , 2003 .

[19]  B. Benmokrane,et al.  Durability Gap Analysis for Fiber-Reinforced Polymer Composites in Civil Infrastructure , 2003 .

[20]  Robert E. Melchers,et al.  Mathematical modelling of the diffusion controlled phase in marine immersion corrosion of mild steel , 2003 .

[21]  L. Hollaway,et al.  Preliminary investigations on the environmental effects on new heavyweight fabrics for use in civil engineering , 2002 .

[22]  L C Hollaway,et al.  Progress in the technique of upgrading metallic structures with advanced polymer composites , 2002 .

[23]  Michael J. Chajes,et al.  STRENGTHENING OF A STEEL BRIDGE GIRDER USING CFRP PLATES , 2001 .

[24]  W. J. Slagter,et al.  Pilot study of metal volume fraction approach for fiber/metal laminates , 1995 .

[25]  Riadh Al-Mahaidi,et al.  Experimental investigation of bond characteristics between CFRP fabrics and steel plate joints under impact tensile loads , 2012 .

[26]  B. Michel,et al.  Mechanism of Moisture Diffusion, Hygroscopic Swelling, and Adhesion Degradation in Epoxy Molding Compounds , 2010 .

[27]  Carlo Poggi,et al.  An experimental, analytical and numerical study of the static behavior of steel beams reinforced by pultruded CFRP strips , 2006 .

[28]  Rajan Sen,et al.  Strengthening steel bridge sections using CFRP laminates , 2001 .