Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs

The native tissues are complex structures consisting of different cell types, extracellular matrix materials, and biomolecules. Traditional tissue engineering strategies have not been able to fully reproduce biomimetic and heterogeneous tissue constructs because of the lack of appropriate biomaterials and technologies. However, recently developed three-dimensional bioprinting techniques can be leveraged to produce biomimetic and complex tissue structures. To achieve this, multicomponent bioinks composed of multiple biomaterials (natural, synthetic, or hybrid natural-synthetic biomaterials), different types of cells, and soluble factors have been developed. In addition, advanced bioprinting technologies have enabled us to print multimaterial bioinks with spatial and microscale resolution in a rapid and continuous manner, aiming to reproduce the complex architecture of the native tissues. This review highlights important advances in heterogeneous bioinks and bioprinting technologies to fabricate biomimetic tissue constructs. Opportunities and challenges to further accelerate this research area are also described.

[1]  Aldo R. Boccaccini,et al.  Angiogenic potential of boron-containing bioactive glasses: in vitro study , 2017, Journal of Materials Science.

[2]  T. Q. Huang,et al.  3D printing of biomimetic microstructures for cancer cell migration , 2014, Biomedical microdevices.

[3]  M. Damaser,et al.  Stem cells as drug delivery methods: application of stem cell secretome for regeneration. , 2015, Advanced drug delivery reviews.

[4]  Katsuhiko Ariga,et al.  A graphene-polyurethane composite hydrogel as a potential bioink for 3D bioprinting and differentiation of neural stem cells. , 2017, Journal of materials chemistry. B.

[5]  D. Kelly,et al.  A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage , 2016, Biofabrication.

[6]  Jens Friedrichs,et al.  Multi-parametric hydrogels support 3D in vitro bioengineered microenvironment models of tumour angiogenesis. , 2015, Biomaterials.

[7]  M Gelinsky,et al.  A definition of bioinks and their distinction from biomaterial inks , 2018, Biofabrication.

[8]  T. Mirabella,et al.  3D-printed vascular networks direct therapeutic angiogenesis in ischaemia , 2017, Nature Biomedical Engineering.

[9]  L. Bonassar,et al.  Cell(MC3T3-E1)-printed poly(ϵ-caprolactone)/alginate hybrid scaffolds for tissue regeneration. , 2013, Macromolecular rapid communications.

[10]  Ahmed Aied,et al.  Bioprinting Using Mechanically Robust Core-Shell Cell-Laden Hydrogel Strands. , 2017, Macromolecular bioscience.

[11]  S. Heilshorn,et al.  Adaptable Hydrogel Networks with Reversible Linkages for Tissue Engineering , 2015, Advanced materials.

[12]  Anthony Atala,et al.  A Photo‐Crosslinkable Kidney ECM‐Derived Bioink Accelerates Renal Tissue Formation , 2019, Advanced healthcare materials.

[13]  Horst Fischer,et al.  Bioprinting Organotypic Hydrogels with Improved Mesenchymal Stem Cell Remodeling and Mineralization Properties for Bone Tissue Engineering , 2016, Advanced healthcare materials.

[14]  Vladimir Mironov,et al.  Organ printing: computer-aided jet-based 3D tissue engineering. , 2003, Trends in biotechnology.

[15]  J. Lemaître,et al.  Calcium phosphate cements: study of the beta-tricalcium phosphate--monocalcium phosphate system. , 1989, Biomaterials.

[16]  Robert Langer,et al.  Surface tension-assisted additive manufacturing , 2018, Nature Communications.

[17]  Xin Fu,et al.  Structurally and Functionally Optimized Silk‐Fibroin–Gelatin Scaffold Using 3D Printing to Repair Cartilage Injury In Vitro and In Vivo , 2017, Advanced materials.

[18]  William G Whitford,et al.  A bioink by any other name: terms, concepts and constructions related to 3D bioprinting , 2016, Future science OA.

[19]  Jean J. Zhao,et al.  Bioprinting for cancer research. , 2015, Trends in biotechnology.

[20]  Jason Wong,et al.  Suture techniques for tendon repair; a comparative review. , 2019, Muscles, ligaments and tendons journal.

[21]  Shoji Takeuchi,et al.  Cell Origami: Self-Folding of Three-Dimensional Cell-Laden Microstructures Driven by Cell Traction Force , 2012, PloS one.

[22]  Bing Chen,et al.  3D bioprinting of BMSC-laden methacrylamide gelatin scaffolds with CBD-BMP2-collagen microfibers , 2015, Biofabrication.

[23]  Dieter Scharnweber,et al.  Biomimetic electrospun scaffolds from main extracellular matrix components for skin tissue engineering application - The role of chondroitin sulfate and sulfated hyaluronan. , 2017, Materials science & engineering. C, Materials for biological applications.

[24]  F Podlogar,et al.  Characterization of Calcium Alginate Beads Containing Structurally Similar Drugs , 2006, Drug development and industrial pharmacy.

[25]  H. Yun,et al.  A simultaneous 3D printing process for the fabrication of bioceramic and cell-laden hydrogel core/shell scaffolds with potential application in bone tissue regeneration. , 2016, Journal of materials chemistry. B.

[26]  Kyunga Na,et al.  Effect of solution viscosity on retardation of cell sedimentation in DLP 3D printing of gelatin methacrylate/silk fibroin bioink , 2017 .

[27]  Ying Mei,et al.  Engineering alginate as bioink for bioprinting. , 2014, Acta biomaterialia.

[28]  Alexandra L. Rutz,et al.  Three-dimensional printing of high-content graphene scaffolds for electronic and biomedical applications. , 2015, ACS nano.

[29]  Benjamin J. Wiley,et al.  3D Printing of a Double Network Hydrogel with a Compression Strength and Elastic Modulus Greater than those of Cartilage. , 2017, ACS biomaterials science & engineering.

[30]  Xiaofeng Cui,et al.  Synergistic action of fibroblast growth factor‐2 and transforming growth factor‐beta1 enhances bioprinted human neocartilage formation , 2012, Biotechnology and bioengineering.

[31]  Kenneth J. Hillan,et al.  Heterozygous embryonic lethality induced by targeted inactivation of the VEGF gene , 1996, Nature.

[32]  Ali Khademhosseini,et al.  Direct 3D bioprinting of perfusable vascular constructs using a blend bioink. , 2016, Biomaterials.

[33]  Eric D. Miller,et al.  Engineered spatial patterns of FGF-2 immobilized on fibrin direct cell organization. , 2005, Biomaterials.

[34]  Vikram Sabapathy,et al.  hiPSC‐derived iMSCs: NextGen MSCs as an advanced therapeutically active cell resource for regenerative medicine , 2016, Journal of cellular and molecular medicine.

[35]  Fang Yang,et al.  Incorporation of stromal cell-derived factor-1α in PCL/gelatin electrospun membranes for guided bone regeneration. , 2013, Biomaterials.

[36]  Ali Khademhosseini,et al.  Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks , 2017, Advanced healthcare materials.

[37]  Ali Khademhosseini,et al.  Advances in engineering hydrogels , 2017, Science.

[38]  Wei Zhu,et al.  3D bioprinting of functional tissue models for personalized drug screening and in vitro disease modeling. , 2018, Advanced drug delivery reviews.

[39]  Y Liu,et al.  A reactor-like spinneret used in 3D printing alginate hollow fiber: a numerical study of morphological evolution. , 2016, Soft matter.

[40]  John W Haycock,et al.  3D cell culture: a review of current approaches and techniques. , 2011, Methods in molecular biology.

[41]  Enrique Sodupe-Ortega,et al.  Accurate Calibration in Multi-Material 3D Bioprinting for Tissue Engineering , 2018, Materials.

[42]  Adam E Jakus,et al.  Advancing the field of 3D biomaterial printing , 2016, Biomedical materials.

[43]  Sophie C Cox,et al.  3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications. , 2015, Materials science & engineering. C, Materials for biological applications.

[44]  Dong-Woo Cho,et al.  3D printed complex tissue construct using stem cell-laden decellularized extracellular matrix bioinks for cardiac repair. , 2017, Biomaterials.

[45]  Ying Mei,et al.  3D Bioprinting for Vascularized Tissue Fabrication , 2016, Annals of Biomedical Engineering.

[46]  Julian R. Jones,et al.  In vitro osteogenesis by intracellular uptake of strontium containing bioactive glass nanoparticles. , 2018, Acta biomaterialia.

[47]  Joseph Suhan,et al.  Bioprinting of Growth Factors onto Aligned Sub-micron Fibrous Scaffolds for Simultaneous Control of Cell Differentiation and Alignment , 2022 .

[48]  Binil Starly,et al.  3D-Bioprinting of Polylactic Acid (PLA) Nanofiber-Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells. , 2016, ACS biomaterials science & engineering.

[49]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[50]  Nureddin Ashammakhi,et al.  Three-Dimensional Bioprinting Can Help Bone. , 2017, The Journal of craniofacial surgery.

[51]  W. Dhert,et al.  Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing. , 2008, Tissue engineering. Part A.

[52]  Meik Neufurth,et al.  Engineering a morphogenetically active hydrogel for bioprinting of bioartificial tissue derived from human osteoblast-like SaOS-2 cells. , 2014, Biomaterials.

[53]  Ali Khademhosseini,et al.  Gold Nanocomposite Bioink for Printing 3D Cardiac Constructs , 2017, Advanced functional materials.

[54]  M Nakamura,et al.  Biomatrices and biomaterials for future developments of bioprinting and biofabrication , 2010, Biofabrication.

[55]  Ali Khademhosseini,et al.  4D bioprinting: the next-generation technology for biofabrication enabled by stimuli-responsive materials , 2016, Biofabrication.

[56]  Alessandro Giacomello,et al.  Epicardial application of cardiac progenitor cells in a 3D-printed gelatin/hyaluronic acid patch preserves cardiac function after myocardial infarction. , 2015, Biomaterials.

[57]  Milica Radisic,et al.  Cardiovascular disease models: A game changing paradigm in drug discovery and screening. , 2019, Biomaterials.

[58]  Ali Khademhosseini,et al.  Patient‐Specific Bioinks for 3D Bioprinting of Tissue Engineering Scaffolds , 2018, Advanced healthcare materials.

[59]  D. Kelly,et al.  Tuning Alginate Bioink Stiffness and Composition for Controlled Growth Factor Delivery and to Spatially Direct MSC Fate within Bioprinted Tissues , 2017, Scientific Reports.

[60]  Kwanghun Chung,et al.  In situ expansion of engineered human liver tissue in a mouse model of chronic liver disease , 2017, Science Translational Medicine.

[61]  Josep A Planell,et al.  Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers , 2014, Biofabrication.

[62]  M. Gümüşderelioğlu,et al.  A bioprintable form of chitosan hydrogel for bone tissue engineering , 2017, Biofabrication.

[63]  G. Siegal,et al.  Flexor tendon repair with a knotless, bidirectional barbed suture: an in vivo biomechanical analysis. , 2015, The Journal of hand surgery.

[64]  Visar Ajeti,et al.  Myocardial Tissue Engineering With Cells Derived From Human-Induced Pluripotent Stem Cells and a Native-Like, High-Resolution, 3-Dimensionally Printed Scaffold , 2017, Circulation research.

[65]  L. Ionov,et al.  Self-folding all-polymer thermoresponsive microcapsules , 2011 .

[66]  Xin Li,et al.  Virus activated artificial ECM induces the osteoblastic differentiation of mesenchymal stem cells without osteogenic supplements , 2013, Scientific Reports.

[67]  Georg N Duda,et al.  Scaffold curvature-mediated novel biomineralization process originates a continuous soft tissue-to-bone interface. , 2017, Acta biomaterialia.

[68]  Anthony Atala,et al.  A 3D bioprinted complex structure for engineering the muscle–tendon unit , 2015, Biofabrication.

[69]  Roberto Parra-Saldivar,et al.  Digitally Tunable Microfluidic Bioprinting of Multilayered Cannular Tissues , 2018, Advanced materials.

[70]  Hwa Liang Leo,et al.  A 3D printed microfluidic perfusion device for multicellular spheroid cultures , 2017, Biofabrication.

[71]  Barbara Rothen-Rutishauser,et al.  Engineering an in vitro air-blood barrier by 3D bioprinting , 2015, Scientific Reports.

[72]  Susanna Miettinen,et al.  Fat Tissue: Views on Reconstruction and Exploitation , 2007, The Journal of craniofacial surgery.

[73]  Jos Malda,et al.  A Synthetic Thermosensitive Hydrogel for Cartilage Bioprinting and Its Biofunctionalization with Polysaccharides. , 2016, Biomacromolecules.

[74]  P. Cerri,et al.  Biology of Bone Tissue: Structure, Function, and Factors That Influence Bone Cells , 2015, BioMed research international.

[75]  André R. Studart,et al.  Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures , 2017 .

[76]  David Eglin,et al.  A versatile bioink for three-dimensional printing of cellular scaffolds based on thermally and photo-triggered tandem gelation. , 2015, Acta biomaterialia.

[77]  Y. Bae,et al.  Thermosensitive sol-gel reversible hydrogels. , 2002, Advanced drug delivery reviews.

[78]  Anthony Atala,et al.  3D bioprinted functional and contractile cardiac tissue constructs. , 2018, Acta biomaterialia.

[79]  John B. Shoven,et al.  I , Edinburgh Medical and Surgical Journal.

[80]  Qing Li,et al.  Biofabrication: A Guide to Technology and Terminology. , 2017, Trends in biotechnology.

[81]  A. Lode,et al.  A versatile method for combining different biopolymers in a core/shell fashion by 3D plotting to achieve mechanically robust constructs , 2016, Biofabrication.

[82]  Robert Langer,et al.  Controlled degradation and mechanical behavior of photopolymerized hyaluronic acid networks. , 2005, Biomacromolecules.

[83]  G. Prestwich,et al.  Photocrosslinkable hyaluronan-gelatin hydrogels for two-step bioprinting. , 2010, Tissue engineering. Part A.

[84]  Gabriel Villar,et al.  A Tissue-Like Printed Material , 2013, Science.

[85]  H. Kim,et al.  Fibroblast Growth Factors: Biology, Function, and Application for Tissue Regeneration , 2010, Journal of tissue engineering.

[86]  Y. S. Zhang,et al.  Microfluidics‐Enabled Multimaterial Maskless Stereolithographic Bioprinting , 2018, Advanced materials.

[87]  Jae Nam,et al.  Direct cell writing of 3D microorgan for in vitro pharmacokinetic model. , 2008, Tissue engineering. Part C, Methods.

[88]  J. B. Tang,et al.  Flexor Tendon Repair With a Knotless Barbed Suture: A Comparative Biomechanical Study , 2012 .

[89]  Ibrahim T. Ozbolat,et al.  Three-dimensional bioprinting using self-assembling scalable scaffold-free “tissue strands” as a new bioink , 2016, Scientific Reports.

[90]  Tsuyoshi Murata,et al.  {m , 1934, ACML.

[91]  Barry J Doyle,et al.  Characterisation of hyaluronic acid methylcellulose hydrogels for 3D bioprinting. , 2018, Journal of the mechanical behavior of biomedical materials.

[92]  Keita Ito,et al.  Silk fibroin as biomaterial for bone tissue engineering. , 2016, Acta biomaterialia.

[93]  Scott A. Wilson,et al.  Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting. , 2017, ACS applied materials & interfaces.

[94]  D. Bouchier-Hayes,et al.  Vascular Endothelial Growth Factor (VEGF) and Its Role in Non-Endothelial Cells: Autocrine Signalling by VEGF , 2013 .

[95]  Tao Xu,et al.  Coaxial extrusion bioprinted shell-core hydrogel microfibers mimic glioma microenvironment and enhance the drug resistance of cancer cells. , 2018, Colloids and surfaces. B, Biointerfaces.

[96]  Lei Cai,et al.  Regulating Stem Cell Secretome Using Injectable Hydrogels with In Situ Network Formation , 2016, Advanced healthcare materials.

[97]  Abbas Shafiee,et al.  Nasal septum-derived multipotent progenitors: a potent source for stem cell-based regenerative medicine. , 2011, Stem cells and development.

[98]  Werner E. G. Müller,et al.  Effect of Bioglass on Growth and Biomineralization of SaOS-2 Cells in Hydrogel after 3D Cell Bioprinting , 2014, PloS one.

[99]  G. Souza,et al.  Three-Dimensional Bioprinting Nanotechnologies towards Clinical Application of Stem Cells and Their Secretome in Salivary Gland Regeneration , 2016, Stem cells international.

[100]  Stephanie J Bryant,et al.  Cell-matrix interactions and dynamic mechanical loading influence chondrocyte gene expression and bioactivity in PEG-RGD hydrogels. , 2009, Acta biomaterialia.

[101]  Petra J. Kluger,et al.  Bone matrix production in hydroxyapatite-modified hydrogels suitable for bone bioprinting , 2017, Biofabrication.

[102]  Aldo R. Boccaccini,et al.  Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering , 2010, Materials.

[103]  Nureddin Ashammakhi,et al.  Drug Release: Proper Control to Help Clinical Application. , 2017, The Journal of craniofacial surgery.

[104]  Carl Diver,et al.  Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering , 2016, Materials.

[105]  Marcy Zenobi-Wong,et al.  Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting , 2015, Biofabrication.

[106]  Wei Zhu,et al.  Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture. , 2017, Biomaterials.

[107]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[108]  Ali Khademhosseini,et al.  Advances and Future Perspectives in 4D Bioprinting , 2018, Biotechnology journal.

[109]  Ellen M. Langer,et al.  Modeling Tumor Phenotypes In Vitro with Three-Dimensional Bioprinting , 2019, Cell reports.

[110]  Liang Ma,et al.  Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery. , 2015, Biomaterials.

[111]  Swati Midha,et al.  Silk fibroin-bioactive glass based advanced biomaterials: towards patient-specific bone grafts , 2018, Biomedical materials.

[112]  Dudley W. Thompson,et al.  The nature of laponite and its aqueous dispersions , 1992 .

[113]  Lori A. Setton,et al.  Photocrosslinkable Hyaluronan as a Scaffold for Articular Cartilage Repair , 2004, Annals of Biomedical Engineering.

[114]  Paul Gatenholm,et al.  Increased lipid accumulation and adipogenic gene expression of adipocytes in 3D bioprinted nanocellulose scaffolds , 2017, Biofabrication.

[115]  Kang Zhang,et al.  3D printing of functional biomaterials for tissue engineering. , 2016, Current opinion in biotechnology.

[116]  Ozan Akkus,et al.  Mechanical Properties, Cytocompatibility and Manufacturability of Chitosan:PEGDA Hybrid-Gel Scaffolds by Stereolithography , 2016, Annals of Biomedical Engineering.

[117]  Anja Lode,et al.  Alginate/nanohydroxyapatite scaffolds with designed core/shell structures fabricated by 3D plotting and in situ mineralization for bone tissue engineering. , 2015, ACS applied materials & interfaces.

[118]  Nan Ma,et al.  Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration. , 2011, Biomaterials.

[119]  Wei Zhu,et al.  Biologically Inspired Smart Release System Based on 3D Bioprinted Perfused Scaffold for Vascularized Tissue Regeneration , 2016, Advanced science.

[120]  H. Kizawa,et al.  Scaffold-free 3D bio-printed human liver tissue stably maintains metabolic functions useful for drug discovery , 2017, Biochemistry and biophysics reports.

[121]  Ali Khademhosseini,et al.  Single Cell Microgel Based Modular Bioinks for Uncoupled Cellular Micro‐ and Macroenvironments , 2017, Advanced healthcare materials.

[122]  Murat Guvendiren,et al.  Shear-thinning hydrogels for biomedical applications , 2012 .

[123]  Antonios G Mikos,et al.  Progress in three-dimensional printing with growth factors. , 2019, Journal of controlled release : official journal of the Controlled Release Society.

[124]  Sailing He,et al.  Rapid Fabrication of Complex 3D Extracellular Microenvironments by Dynamic Optical Projection Stereolithography , 2012, Advanced materials.

[125]  Wojciech Święszkowski,et al.  3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation , 2016, Biofabrication.

[126]  G. Prestwich,et al.  Dynamically Crosslinked Gold Nanoparticle – Hyaluronan Hydrogels , 2010, Advanced materials.

[127]  Jinho Hyun,et al.  Melanin Nanoparticle-Incorporated Silk Fibroin Hydrogels for the Enhancement of Printing Resolution in 3D-Projection Stereolithography of Poly(ethylene glycol)-Tetraacrylate Bio-ink. , 2018, ACS applied materials & interfaces.

[128]  Petra J. Kluger,et al.  Hydroxyapatite-modified gelatin bioinks for bone bioprinting , 2016 .

[129]  R. Samanipour,et al.  A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks , 2015, Biofabrication.

[130]  Amit Bandyopadhyay,et al.  Recent advances in bone tissue engineering scaffolds. , 2012, Trends in biotechnology.

[131]  Akhilesh K Gaharwar,et al.  Nanoengineered Ionic-Covalent Entanglement (NICE) Bioinks for 3D Bioprinting. , 2018, ACS applied materials & interfaces.

[132]  Julian R. Jones,et al.  Human mesenchymal stem cells differentiate into an osteogenic lineage in presence of strontium containing bioactive glass nanoparticles. , 2019, Acta biomaterialia.

[133]  Kai Zheng,et al.  Sol-gel processing of bioactive glass nanoparticles: A review. , 2017, Advances in colloid and interface science.

[134]  K. Anseth,et al.  The design of reversible hydrogels to capture extracellular matrix dynamics , 2016, Nature Reviews Materials.

[135]  Bon Kang Gu,et al.  3-dimensional bioprinting for tissue engineering applications , 2016, Biomaterials Research.

[136]  Nicholas Dunne,et al.  Printability of calcium phosphate: calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique. , 2014, Materials science & engineering. C, Materials for biological applications.

[137]  J. Weisel,et al.  The mechanical properties of fibrin for basic scientists and clinicians. , 2004, Biophysical chemistry.

[138]  Gary J Hooper,et al.  Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs , 2018, Biofabrication.

[139]  Swati Midha,et al.  Regulation of Chondrogenesis and Hypertrophy in Silk Fibroin-Gelatin-Based 3D Bioprinted Constructs. , 2016, ACS biomaterials science & engineering.

[140]  Dajun Chen,et al.  A new polymer/clay nano-composite hydrogel with improved response rate and tensile mechanical properties , 2006 .

[141]  Yaser Shanjani,et al.  Three-dimensional fabrication of cell-laden biodegradable poly(ethylene glycol-co-depsipeptide) hydrogels by visible light stereolithography. , 2015, Journal of materials chemistry. B.

[142]  Ali Khademhosseini,et al.  Hall of Fame Article: Minimally Invasive and Regenerative Therapeutics (Adv. Mater. 1/2019) , 2019, Advanced Materials.

[143]  R. Müller,et al.  'Stealth' corona-core nanoparticles surface modified by polyethylene glycol (PEG): influences of the corona (PEG chain length and surface density) and of the core composition on phagocytic uptake and plasma protein adsorption. , 2000, Colloids and surfaces. B, Biointerfaces.

[144]  Junhe Yang,et al.  3D bioprinting of cellulose with controlled porous structures from NMMO , 2018 .

[145]  Eric D. Miller,et al.  Inkjet-based biopatterning of bone morphogenetic protein-2 to spatially control calvarial bone formation. , 2010, Tissue engineering. Part A.

[146]  L. Niklason,et al.  Scaffold-free vascular tissue engineering using bioprinting. , 2009, Biomaterials.

[147]  Kyung Min Park,et al.  Tissue Engineering and Regenerative Medicine 2017: A Year in Review. , 2018, Tissue engineering. Part B, Reviews.

[148]  May Win Naing,et al.  Polyelectrolyte gelatin-chitosan hydrogel optimized for 3D bioprinting in skin tissue engineering , 2016 .

[149]  Peter Pivonka,et al.  In situ handheld three‐dimensional bioprinting for cartilage regeneration , 2018, Journal of tissue engineering and regenerative medicine.

[150]  Mei Wei,et al.  Development of a novel alginate-polyvinyl alcohol-hydroxyapatite hydrogel for 3D bioprinting bone tissue engineered scaffolds. , 2017, Journal of biomedical materials research. Part A.

[151]  Wim E Hennink,et al.  25th Anniversary Article: Engineering Hydrogels for Biofabrication , 2013, Advanced materials.

[152]  Danna Zhou,et al.  d. , 1934, Microbial pathogenesis.

[153]  Ji Seon Kim,et al.  Bio-ink Materials for 3D Bio-printing , 2016 .

[154]  Brian J Sennett,et al.  An anisotropic nanofiber/microsphere composite with controlled release of biomolecules for fibrous tissue engineering. , 2010, Biomaterials.

[155]  Wei Zhu,et al.  3D bioprinted graphene oxide-incorporated matrix for promoting chondrogenic differentiation of human bone marrow mesenchymal stem cells , 2017 .

[156]  M. Sporn,et al.  Transforming growth factor type beta: rapid induction of fibrosis and angiogenesis in vivo and stimulation of collagen formation in vitro. , 1986, Proceedings of the National Academy of Sciences of the United States of America.

[157]  S. Hsu,et al.  3D bioprinting of neural stem cell-laden thermoresponsive biodegradable polyurethane hydrogel and potential in central nervous system repair. , 2015, Biomaterials.

[158]  J. Lewis,et al.  3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs , 2014, Advanced materials.

[159]  Tim B. F. Woodfield,et al.  Thiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies , 2017, Advanced materials.

[160]  A. Bandyopadhyay,et al.  Bone tissue engineering using 3D printing , 2013 .

[161]  A. Boskey,et al.  Bone composition: relationship to bone fragility and antiosteoporotic drug effects. , 2013, BoneKEy reports.

[162]  Kyung-Ok Cho,et al.  Therapeutic Potential of Human Turbinate-Derived Mesenchymal Stem Cells in Experimental Acute Ischemic Stroke , 2018, International neurourology journal.

[163]  Yu Shrike Zhang,et al.  A General Strategy for Extrusion Bioprinting of Bio-Macromolecular Bioinks through Alginate-Templated Dual-Stage Crosslinking. , 2018, Macromolecular bioscience.

[164]  Wouter J A Dhert,et al.  3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity , 2017, PloS one.

[165]  Yanxia Zhang,et al.  Sequential and sustained release of SDF-1 and BMP-2 from silk fibroin-nanohydroxyapatite scaffold for the enhancement of bone regeneration. , 2016, Biomaterials.

[166]  Hon Fai Chan,et al.  3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures , 2015, Advanced materials.

[167]  P. Wakeley,et al.  Synthesis , 2013, The Role of Animals in Emerging Viral Diseases.

[168]  Danmei Liu,et al.  α2-HS Glycoprotein/Fetuin, a Transforming Growth Factor-β/Bone Morphogenetic Protein Antagonist, Regulates Postnatal Bone Growth and Remodeling* , 2002, The Journal of Biological Chemistry.

[169]  Dong-Woo Cho,et al.  Bioprintable, cell-laden silk fibroin-gelatin hydrogel supporting multilineage differentiation of stem cells for fabrication of three-dimensional tissue constructs. , 2015, Acta biomaterialia.

[170]  Wonhye Lee,et al.  Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture , 2010, Experimental Neurology.

[171]  Ali Khademhosseini,et al.  A perspective on 3D bioprinting in tissue regeneration , 2018, Bio-design and manufacturing.

[172]  C. Highley,et al.  Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels , 2015, Advanced materials.

[173]  Skylar Tibbits,et al.  4D Printing: Multi‐Material Shape Change , 2014 .

[174]  H. Bayley,et al.  High-Resolution Patterned Cellular Constructs by Droplet-Based 3D Printing , 2017, Scientific Reports.

[175]  A. Khademhosseini,et al.  Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink , 2016, Advanced materials.

[176]  Wei Zhu,et al.  3D bioprinting mesenchymal stem cell-laden construct with core–shell nanospheres for cartilage tissue engineering , 2018, Nanotechnology.

[177]  Thomas J Ober,et al.  Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks , 2015, Advanced materials.

[178]  Alexandra L. Rutz,et al.  A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels , 2015, Advanced materials.

[179]  Dong-Woo Cho,et al.  Biofabrication: reappraising the definition of an evolving field , 2016, Biofabrication.

[180]  M. J. Sawkins,et al.  Cell and protein compatible 3D bioprinting of mechanically strong constructs for bone repair , 2015, Biofabrication.

[181]  Georg N. Duda,et al.  Comparison of the effects of 45S5 and 1393 bioactive glass microparticles on hMSC behavior , 2017, Journal of biomedical materials research. Part A.

[182]  D. Cho,et al.  Biomimetic 3D tissue printing for soft tissue regeneration. , 2015, Biomaterials.

[183]  Lang Xia,et al.  Stereolithographic 4D Bioprinting of Multiresponsive Architectures for Neural Engineering , 2018, Advanced biosystems.

[184]  Waka Lin,et al.  Inkjet printing technology and bio-ink development for the biofabrication of in vitro 3D tissues , 2017 .

[185]  Wei Zhu,et al.  Gelatin methacrylamide hydrogel with graphene nanoplatelets for neural cell-laden 3D bioprinting , 2016, 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[186]  Matthias P Lutolf,et al.  Biopolymeric delivery matrices for angiogenic growth factors. , 2003, Cardiovascular pathology : the official journal of the Society for Cardiovascular Pathology.

[187]  Carlos Osuna,et al.  Agarose-Based Hydrogels as Suitable Bioprinting Materials for Tissue Engineering. , 2018, ACS biomaterials science & engineering.

[188]  J A Burdick,et al.  Recent advances in hydrogels for cartilage tissue engineering. , 2017, European cells & materials.

[189]  Brendon M. Baker,et al.  Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues , 2012 .

[190]  P. Gatenholm,et al.  3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications. , 2015, Biomacromolecules.

[191]  M. Madan Babu,et al.  A million peptide motifs for the molecular biologist. , 2014, Molecular cell.

[192]  Guifang Gao,et al.  Bioactive nanoparticles stimulate bone tissue formation in bioprinted three-dimensional scaffold and human mesenchymal stem cells. , 2014, Biotechnology journal.

[193]  Jos Malda,et al.  Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair. , 2016, Trends in biotechnology.

[194]  Marco Rasponi,et al.  Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip. , 2016, Biomaterials.

[195]  Marco Costantini,et al.  Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs. , 2017, Methods in molecular biology.

[196]  V Mironov,et al.  Anatomy of tissue engineering , 2001, The Anatomical record.

[197]  Toru Takehisa,et al.  Nanocomposite Hydrogels: A Unique Organic–Inorganic Network Structure with Extraordinary Mechanical, Optical, and Swelling/De‐swelling Properties , 2002 .

[198]  Amit Bandyopadhyay,et al.  Effect of Chemistry on Osteogenesis and Angiogenesis Towards Bone Tissue Engineering Using 3D Printed Scaffolds , 2016, Annals of Biomedical Engineering.

[199]  Dong-Woo Cho,et al.  An additive manufacturing‐based PCL–alginate–chondrocyte bioprinted scaffold for cartilage tissue engineering , 2015, Journal of tissue engineering and regenerative medicine.

[200]  Dong-Woo Cho,et al.  Human Inferior Turbinate , 2012, Otolaryngology--head and neck surgery : official journal of American Academy of Otolaryngology-Head and Neck Surgery.

[201]  Kristi S Anseth,et al.  Manipulations in hydrogel degradation behavior enhance osteoblast function and mineralized tissue formation. , 2006, Tissue engineering.

[202]  M. Fornage,et al.  Heart Disease and Stroke Statistics—2017 Update: A Report From the American Heart Association , 2017, Circulation.

[203]  Kristi S Anseth,et al.  Photopolymerized dynamic hydrogels with tunable viscoelastic properties through thioester exchange. , 2018, Biomaterials.

[204]  S. Ahadian,et al.  Minimally Invasive and Regenerative Therapeutics , 2018, Advanced materials.

[205]  Ye Zhu,et al.  Phage Nanofibers Induce Vascularized Osteogenesis in 3D Printed Bone Scaffolds , 2014, Advanced materials.

[206]  Feng Xu,et al.  4D Bioprinting for Biomedical Applications. , 2016, Trends in biotechnology.

[207]  Y. Li,et al.  Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting , 2016, Proceedings of the National Academy of Sciences.

[208]  A. Khademhosseini,et al.  Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels. , 2015, Biomaterials.

[209]  Wai Yee Yeong,et al.  Hybrid microscaffold-based 3D bioprinting of multi-cellular constructs with high compressive strength: A new biofabrication strategy , 2016, Scientific Reports.

[210]  P. Gatenholm,et al.  Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink , 2017, Scientific Reports.

[211]  Deok‐Ho Kim,et al.  Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink , 2014, Nature Communications.

[212]  Johnson H. Y. Chung,et al.  Bio-ink properties and printability for extrusion printing living cells. , 2013, Biomaterials science.

[213]  Benjamin M Wu,et al.  High doses of bone morphogenetic protein 2 induce structurally abnormal bone and inflammation in vivo. , 2011, Tissue engineering. Part A.

[214]  P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .

[215]  P. Caliceti,et al.  Controlled release of biomolecules from temperature-sensitive hydrogels prepared by radiation polymerization. , 2001, Journal of controlled release : official journal of the Controlled Release Society.

[216]  WangWeiguang,et al.  3D-Printed Poly(ɛ-caprolactone)/Graphene Scaffolds Activated with P1-Latex Protein for Bone Regeneration , 2018 .

[217]  Marcel A. Heinrich,et al.  Rapid Continuous Multimaterial Extrusion Bioprinting , 2017, Advanced materials.

[218]  Michael C. McAlpine,et al.  3D Printed Bionic Ears , 2013, Nano letters.

[219]  Won Jin Kim,et al.  An innovative cell-laden α-TCP/collagen scaffold fabricated using a two-step printing process for potential application in regenerating hard tissues , 2017, Scientific Reports.

[220]  Ali Khademhosseini,et al.  Controlling Spatial Organization of Multiple Cell Types in Defined 3D Geometries , 2012, Advanced materials.

[221]  Joseph E Losee,et al.  Precise Control of Osteogenesis for Craniofacial Defect Repair: The Role of Direct Osteoprogenitor Contact in BMP-2-Based Bioprinting , 2012, Annals of plastic surgery.

[222]  Huaping Tan,et al.  Alginate-Based Biomaterials for Regenerative Medicine Applications , 2013, Materials.

[223]  Ralph Müller,et al.  Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting. , 2014, Acta biomaterialia.

[224]  J. Šafka,et al.  Composite 3D printed scaffold with structured electrospun nanofibers promotes chondrocyte adhesion and infiltration , 2018, Cell adhesion & migration.

[225]  Andre Sharon,et al.  3D bioprinting of GelMA scaffolds triggers mineral deposition by primary human osteoblasts , 2017, Biofabrication.

[226]  James J. Yoo,et al.  A 3D bioprinting system to produce human-scale tissue constructs with structural integrity , 2016, Nature Biotechnology.

[227]  David J Mooney,et al.  Single cell-laden protease-sensitive microniches for long-term culture in 3D. , 2017, Lab on a chip.

[228]  P. Pimienta,et al.  Mechanical Properties , 2018, Bainite in Steels.

[229]  Ali Khademhosseini,et al.  Advancing Frontiers in Bone Bioprinting , 2019, Advanced healthcare materials.

[230]  Settimio Pacelli,et al.  Stem cell-inspired secretome-rich injectable hydrogel to repair injured cardiac tissue. , 2017, Acta biomaterialia.

[231]  K H Kang,et al.  Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic valve hydrogel scaffolds , 2012, Biofabrication.

[232]  Ibrahim T. Ozbolat,et al.  The bioink: A comprehensive review on bioprintable materials. , 2017, Biotechnology advances.

[233]  Kristi S. Anseth,et al.  PEG Hydrogels for the Controlled Release of Biomolecules in Regenerative Medicine , 2009, Pharmaceutical Research.

[234]  Julian R Jones,et al.  Highly degradable porous melt-derived bioactive glass foam scaffolds for bone regeneration. , 2017, Acta biomaterialia.

[235]  Makoto Shiota,et al.  Histological and histomorphometrical comparative study of the degradation and osteoconductive characteristics of α- and β-tricalcium phosphate in block grafts , 2007 .

[236]  Chang Lei,et al.  Chitosan as a barrier membrane material in periodontal tissue regeneration. , 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

[237]  Diego Velasco,et al.  3D bioprinting of functional human skin: production and in vivo analysis , 2016, Biofabrication.

[238]  Ursula Graf-Hausner,et al.  A Novel Microplate 3D Bioprinting Platform for the Engineering of Muscle and Tendon Tissues , 2018, SLAS technology.

[239]  A. Studart,et al.  Multimaterial magnetically assisted 3D printing of composite materials , 2015, Nature Communications.

[240]  Jos Malda,et al.  Reinforcement of hydrogels using three-dimensionally printed microfibres , 2015, Nature Communications.

[241]  Amir Hosein Sakhaei,et al.  Multimaterial 4D Printing with Tailorable Shape Memory Polymers , 2016, Scientific Reports.

[242]  Ibrahim T. Ozbolat,et al.  Controlled and Sequential Delivery of Fluorophores from 3D Printed Alginate-PLGA Tubes , 2016, Annals of Biomedical Engineering.

[243]  Nazzar Tellisi,et al.  Three Dimensional Printed Bone Implants in the Clinic , 2018, The Journal of craniofacial surgery.

[244]  Liliang Ouyang,et al.  Three-dimensional printing of Hela cells for cervical tumor model in vitro , 2014, Biofabrication.

[245]  Umut A. Gurkan,et al.  Engineering Anisotropic Biomimetic Fibrocartilage Microenvironment by Bioprinting Mesenchymal Stem Cells in Nanoliter Gel Droplets , 2014, Molecular pharmaceutics.

[246]  Murugan Ramalingam,et al.  The use of microtechnology and nanotechnology in fabricating vascularized tissues. , 2014, Journal of nanoscience and nanotechnology.

[247]  Wouter J A Dhert,et al.  Prolonged presence of VEGF promotes vascularization in 3D bioprinted scaffolds with defined architecture. , 2014, Journal of controlled release : official journal of the Controlled Release Society.

[248]  B N Chichkov,et al.  Adipogenic differentiation of laser-printed 3D tissue grafts consisting of human adipose-derived stem cells , 2011, Biofabrication.

[249]  B. Frank Eames,et al.  Homogeneous hydroxyapatite/alginate composite hydrogel promotes calcified cartilage matrix deposition with potential for three-dimensional bioprinting , 2018, Biofabrication.

[250]  Suck Won Hong,et al.  Three-dimensional graphene oxide-coated polyurethane foams beneficial to myogenesis , 2018, Journal of biomaterials science. Polymer edition.

[251]  Ali Khademhosseini,et al.  Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue , 2017, Advanced healthcare materials.

[252]  F. Lin,et al.  Rapid Prototyping Three-Dimensional Cell/Gelatin/Fibrinogen Constructs for Medical Regeneration: , 2007 .

[253]  Wei Sun,et al.  The influence of printing parameters on cell survival rate and printability in microextrusion-based 3D cell printing technology , 2015, Biofabrication.

[254]  Ali Khademhosseini,et al.  Coaxial extrusion bioprinting of 3D microfibrous constructs with cell-favorable gelatin methacryloyl microenvironments , 2018, Biofabrication.

[255]  S. H. Park,et al.  LB52 - Potential application of three-dimensional bioprinted constructs consisting of human nasal inferior turbinate-derived mesenchymal stem cells for osteogenic tissue regeneration , 2017 .

[256]  Wen-Ching Chang,et al.  3D Printing of Cytocompatible Water-Based Light-Cured Polyurethane with Hyaluronic Acid for Cartilage Tissue Engineering Applications , 2017, Materials.

[257]  Gordon G. Wallace,et al.  A bio-friendly, green route to processable, biocompatible graphene/polymer composites , 2015 .

[258]  Wouter J A Dhert,et al.  Porous bioprinted constructs in BMP-2 non-viral gene therapy for bone tissue engineering. , 2013, Journal of materials chemistry. B.

[259]  Gabriel Villar,et al.  Formation of droplet networks that function in aqueous environments. , 2011, Nature nanotechnology.

[260]  Dong-Woo Cho,et al.  Development of a 3D cell printed construct considering angiogenesis for liver tissue engineering , 2016, Biofabrication.

[261]  I. Noh,et al.  Recent trends in bioinks for 3D printing , 2018, Biomaterials Research.

[262]  Debby Gawlitta,et al.  Scaffold porosity and oxygenation of printed hydrogel constructs affect functionality of embedded osteogenic progenitors. , 2011, Tissue engineering. Part A.

[263]  Julian R. Jones,et al.  Influence of calcium and phosphorus release from bioactive glasses on viability and differentiation of dental pulp stem cells , 2017, Journal of Materials Science.

[264]  Napoleone Ferrara,et al.  VEGF couples hypertrophic cartilage remodeling, ossification and angiogenesis during endochondral bone formation , 1999, Nature Medicine.

[265]  C. L. Ventola.  Medical Applications for 3D Printing: Current and Projected Uses. , 2014, P & T : a peer-reviewed journal for formulary management.

[266]  Richard W Farndale,et al.  Evaluation of cell binding to collagen and gelatin: a study of the effect of 2D and 3D architecture and surface chemistry , 2016, Journal of Materials Science: Materials in Medicine.