High-contrast 10  fs OPCPA-based front end for multi-PW laser chains.

Applications using multi-PW lasers necessitate high temporal pulse quality with a tremendous contrast ratio (CR). The first crucial prerequisite to achieve multi-PW peak power is the generation of ultrashort pulses with good spectral phase quality. Second, to avoid any deleterious pre-ionization effect on targets, nanosecond contrast better than 1012 is also targeted. In the framework of the Apollon 10 PW French laser program, we present a high-contrast 10 fs front-end design study to inject highly energetic Ti:sapphire PW lasers. The CR has been measured and analyzed in different time ranges highlighting the different major contributions for each scale.

[1]  Vincent Bagnoud,et al.  Noise reduction in third order cross-correlation by angle optimization of the interacting beams. , 2017, Optics express.

[2]  P. Nickles,et al.  High-repetition-rate chirped-pulse-amplification thin-disk laser system with joule-level pulse energy. , 2009, Optics letters.

[3]  L. P. Ramirez,et al.  Compact, simple, and robust cross polarized wave generation source of few-cycle, high-contrast pulses for seeding petawatt-class laser systems , 2013 .

[4]  L. P. Ramirez,et al.  Efficient cross polarized wave generation for compact, energy-scalable, ultrashort laser sources. , 2011, Optics express.

[5]  Andrew G. Glen,et al.  APPL , 2001 .

[6]  K Yamakawa,et al.  0.85-PW, 33-fs Ti:sapphire laser. , 2003, Optics letters.

[7]  D. T. Michel,et al.  High Power Laser Science and Engineering , 2015 .

[8]  Zach DeVito,et al.  Opt , 2017 .

[9]  Jake Bromage,et al.  Impact of high-frequency spectral phase modulation on the temporal profile of short optical pulses. , 2008, Optics express.

[10]  Jake Bromage,et al.  Temporal contrast degradation at the focus of ultrafast pulses from high-frequency spectral phase modulation , 2012 .

[11]  H. Pépin,et al.  Energetic protons generated by ultrahigh contrast laser pulses interacting with ultrathin targets , 2007 .

[12]  Highly stable ultrabroadband mid-IR optical parametric chirped-pulse amplifier optimized for superfluorescence suppression. , 2009, Optics letters.

[13]  L. P. Ramirez,et al.  High-fidelity front-end for high-power, high temporal quality few-cycle lasers , 2011 .

[14]  Karoly Osvay,et al.  Analysis and optimization of optical parametric chirped pulse amplification , 2002 .

[15]  P. Georges,et al.  High Repetition Rate Yb:CaF2 Multipass Amplifiers Operating in the 100-mJ Range , 2015, IEEE Journal of Selected Topics in Quantum Electronics.

[16]  Colin N. Danson,et al.  Petawatt class lasers worldwide , 2015, High Power Laser Science and Engineering.

[17]  Yuxin Leng,et al.  High-contrast 2.0 Petawatt Ti:sapphire laser system. , 2013, Optics express.

[18]  Patrick Georges,et al.  Diode-pumped Yb:CaF$$_2$$2 multipass amplifier producing 50 mJ with dynamic analysis for high repetition rate operation , 2014 .

[19]  Patrick Georges,et al.  The Apollon 10 PW laser: experimental and theoretical investigation of the temporal characteristics , 2016, High Power Laser Science and Engineering.

[20]  Zhiyi Wei,et al.  High-contrast 1.16 PW Ti:sapphire laser system combined with a doubled chirped-pulse amplification scheme and a femtosecond optical-parametric amplifier. , 2011, Optics letters.

[21]  J. W. Yoon,et al.  Generation of high-contrast, 30 fs, 1.5 PW laser pulses , 2012, 2013 Conference on Lasers and Electro-Optics Pacific Rim (CLEOPR).

[22]  Pascal Monot,et al.  Design and current progress of the Apollon 10 PW project , 2014, High Power Laser Science and Engineering.