Strength of internally ring-stiffened tubular DT-joints subjected to brace axial loading

Abstract This paper presents the results of numerical and theoretical studies to obtain static strength equations for internally ring-stiffened circular hollow section (CHS) tubular DT-joints. An extensive study of 1264 unstiffened and ring-stiffened DT-joints subjected to brace axial compression or tension was conducted. The numerical analysis shows that failure mechanism of crown- and saddle-stiffened DT-joints under brace axial loading is formation of plastic hinges in the stiffener and chord wall yielding near the brace-chord intersection. Based on the identified failure mechanism, theoretical models and corresponding equations for predicting the stiffener strength in crown- and saddle-stiffened DT-joints subjected to brace axial compression or tension were proposed. The accuracy of the proposed stiffener strength equations was evaluated by an error analysis. A chord stress function was proposed to consider chord axial stress effect on the stiffened DT-joint strength. In conjunction with existing unstiffened DT-joint strength formulae and considering chord axial stress effect, a strength equation for crown- and saddle-stiffened DT-joints subjected to brace axial loading was proposed.

[1]  Hamid Ahmadi,et al.  Parametric study and formulation of outer-brace geometric stress concentration factors in internally ring-stiffened tubular KT-joints of offshore structures , 2012 .

[2]  M.M.K Lee,et al.  Strength of ring-stiffened tubular T-joints in offshore structures—: a numerical parametric study , 1999 .

[3]  A. Llewelyn-Parry,et al.  Offshore Tubular T-Joints Reinforced with Internal Plain Annular Ring Stiffeners , 2004 .

[4]  Hamid Ahmadi,et al.  Probability density functions of SCFs in internally ring-stiffened tubular KT-joints of offshore structures subjected to axial loading , 2015 .

[5]  Jaap Wardenier.  Design guide for circular hollow section (CHS) joints under predominantly static loading , 1991 .

[6]  Joo-Woo Kim,et al.  Vierendeel joints in the circular hollow sections of high strength steel subjected to brace moment and chord compressive loadings , 2012 .

[7]  Yoo Sang Choo,et al.  The Axial Strength of Uniplanar X-Joints Reinforced By T-Shaped Ring-Stiffeners , 1997 .

[8]  A. G. Madhava Rao,et al.  Fatigue crack growth in stiffened steel tubular joints in seawater environment , 2000 .

[9]  Jaap Wardenier,et al.  Static Strength of Axially Loaded Elliptical Hollow Section X Joints with Braces Welded to Wide Sides of Chord. I: Numerical Investigations Based on Experimental Tests , 2014 .

[10]  T. Thandavamoorthy.  Reserve capacity of fatigue damaged internally ring stiffened tubular joints , 2004 .

[11]  Yoo Sang Choo,et al.  Static Strength of Axially Loaded Elliptical Hollow Section X Joints with Braces Welded to Wide Sides of Chord. II: Parametric Study and Strength Equations , 2014 .

[12]  D. S. Ramachandra Murthy,et al.  Fatigue Behavior of Internally Ring-Stiffened Welded Steel Tubular Joints , 2000 .

[13]  Marcus M. K. Lee,et al.  Strength prediction for ring-stiffened DT-joints in offshore jacket structures , 2005 .

[14]  A. G. Madhava Rao,et al.  Behavior of Internally Ring-Stiffened Joints of Offshore Platforms , 1999 .

[15]  Chanakya Arya,et al.  Eurocode 3: Design of steel structures , 2018, Design of Structural Elements.

[17]  Z. Hongyan,et al.  Static Strength of Circular Tubular T-joints with Inner Doubler PlateReinforcement Subjected to Axial Compression , 2013 .