Flow distribution and maximum current density studies in redox flow batteries with a single passage of the serpentine flow channel
暂无分享,去创建一个
Robert F. Savinell | Joseph M. Prahl | J. Iwan D. Alexander | Xinyou Ke | J. Alexander | R. Savinell | Xinyou Ke | J. Prahl
[1] J. Bao,et al. Studies on pressure losses and flow rate optimization in vanadium redox flow battery , 2014 .
[2] S. Jayanti,et al. Ex-situ experimental studies on serpentine flow field design for redox flow battery systems , 2014 .
[3] Michael P. Marshak,et al. A metal-free organic–inorganic aqueous flow battery , 2014, Nature.
[4] Xinyou Ke. CFD Studies on Mass Transport in Redox Flow Batteries , 2014 .
[5] Qian Xu,et al. Numerical investigations of flow field designs for vanadium redox flow batteries , 2013 .
[6] Gang Qiu,et al. Pore-scale analysis of effects of electrode morphology and electrolyte flow conditions on performance of vanadium redox flow batteries , 2012 .
[7] C. Low,et al. Progress in redox flow batteries, remaining challenges and their applications in energy storage , 2012 .
[8] Qinghua Liu,et al. Dramatic performance gains in vanadium redox flow batteries through modified cell architecture , 2012 .
[9] Matthias Ehrhardt. An Introduction to Fluid-Porous Interface Coupling , 2012 .
[10] Arvind R. Kalidindi,et al. A Transient Vanadium Flow Battery Model Incorporating Vanadium Crossover and Water Transport through the Membrane , 2012 .
[11] Qinghua Liu,et al. High Performance Vanadium Redox Flow Batteries with Optimized Electrode Configuration and Membrane Selection , 2012 .
[12] M. Mench,et al. Redox flow batteries: a review , 2011 .
[13] Thomas A. Zawodzinski,et al. Polarization curve analysis of all-vanadium redox flow batteries , 2011 .
[14] Maria Skyllas-Kazacos,et al. Progress in Flow Battery Research and Development , 2011 .
[15] Victor E. Brunini,et al. Semi‐Solid Lithium Rechargeable Flow Battery , 2011 .
[16] Akeel A. Shah,et al. A Dynamic Unit Cell Model for the All-Vanadium Flow Battery , 2011 .
[17] Bao‐guo Wang,et al. Numerical Simulation and Experiment on the Electrolyte Flow Distribution for All Vanadium Redox Flow Battery , 2011 .
[18] Michael Vynnycky,et al. Analysis of a model for the operation of a vanadium redox battery , 2011 .
[19] Jun Liu,et al. Electrochemical energy storage for green grid. , 2011, Chemical reviews.
[20] Frank C. Walsh,et al. Modelling the effects of oxygen evolution in the all-vanadium redox flow battery , 2010 .
[21] Frank C. Walsh,et al. Dynamic modelling of hydrogen evolution effects in the all-vanadium redox flow battery , 2010 .
[22] Frank C. Walsh,et al. Non-isothermal modelling of the all-vanadium redox flow battery , 2009 .
[23] Frank C. Walsh,et al. A dynamic performance model for redox-flow batteries involving soluble species , 2008 .
[24] D. Jamet,et al. Boundary conditions at a fluid–porous interface: An a priori estimation of the stress jump coefficients , 2007 .
[25] David Sinton,et al. High-performance microfluidic vanadium redox fuel cell , 2007 .
[26] D. Jamet,et al. Boundary conditions at a planar fluid–porous interface for a Poiseuille flow , 2006 .
[27] M. Grae Worster,et al. Interfacial conditions between a pure fluid and a porous medium: implications for binary alloy solidification , 2006, Journal of Fluid Mechanics.
[28] M. M. Tomadakis,et al. Viscous Permeability of Random Fiber Structures: Comparison of Electrical and Diffusional Estimates with Experimental and Analytical Results , 2005 .
[29] M. Velarde,et al. Momentum transport at a fluid–porous interface , 2003 .
[30] Vsevolod Laptev,et al. Numerical solution of coupled flow in plain and porous media , 2003 .
[31] Kambiz Vafai,et al. Analysis of fluid flow and heat transfer interfacial conditions between a porous medium and a fluid layer , 2001 .
[32] S. Whitaker. The method of volume averaging , 1998 .
[33] Sung Jin Kim,et al. Convective heat transfer in porous and overlying fluid layers heated from below , 1996 .
[34] Stephen Whitaker,et al. Momentum transfer at the boundary between a porous medium and a homogeneous fluid—II. Comparison with experiment , 1995 .
[35] Stephen Whitaker,et al. Momentum transfer at the boundary between a porous medium and a homogeneous fluid-I. Theoretical development , 1995 .
[36] Maria Skyllas-Kazacos,et al. Characteristics and performance of 1 kW UNSW vanadium redox battery , 1991 .
[37] S. Palmas,et al. Behaviour of a carbon felt flow by electrodes Part I: Mass transfer characteristics , 1991 .
[38] Kambiz Vafai,et al. between a porous medium and a fluid layer---an exact solution , 1990 .
[39] Dimos Poulikakos,et al. Forced convection in a duct partially filled with a porous material , 1987 .
[40] Kambiz Vafai,et al. Analysis of flow and heat transfer at the interface region of a porous medium , 1987 .
[41] K. J. Cathro,et al. Preparation and performance of plastic-bonded-carbon bromine electrodes , 1987 .
[42] Anthony G. Fane,et al. New All‐Vanadium Redox Flow Cell , 1986 .
[43] S. Whitaker. Flow in porous media I: A theoretical derivation of Darcy's law , 1986 .
[44] S. Whitaker,et al. The spatial averaging theorem revisited , 1985 .
[45] L. W. Hruska,et al. Investigation of Factors Affecting Performance of the Iron‐Redox Battery , 1981 .
[46] W. O. Williams. Constitutive equations for flow of an incompressible viscous fluid through a porous medium , 1978 .
[47] William G. Gray,et al. On the General Equations for Flow in Porous Media and Their Reduction to Darcy's Law , 1976 .
[48] G. Neale,et al. Practical significance of brinkman's extension of darcy's law: Coupled parallel flows within a channel and a bounding porous medium , 1974 .
[49] Stephen Whitaker,et al. The transport equations for multi-phase systems , 1973 .
[50] P. Saffman. On the Boundary Condition at the Surface of a Porous Medium , 1971 .
[51] D. Collins,et al. Power Sources 3 , 1971 .
[52] J. Smith,et al. Low Reynolds number developing flows , 1969 .
[53] D. Joseph,et al. Boundary conditions at a naturally permeable wall , 1967, Journal of Fluid Mechanics.
[54] S. Whitaker. Diffusion and dispersion in porous media , 1967 .