The improvement of silicone-based materials used in space and aerospace environments has garnered much attention for several decades. Most recently, an Ultra Low Outgassing™ silicone incorporating innovative reinforcing and functional fillers has shown that silicone elastomers with unique and specific properties can be developed to meet applications requiring stringent outgassing requirements. This paper will report on the next crucial step in qualifying these materials for spacecraft applications requiring chemical and physical stability in the presence of ionizing radiation. As a first step in this process, selected materials were irradiated with Co-60 gamma-rays to simulate the total dose received in near- Earth orbits. The paper will present pre-and post-irradiation response data of Ultra Low Outgassing silicone samples exposed under ambient air environment coupled with measurements of collected volatile condensable material (CVCM) and total mass loss (TML) per the standard conditions in ASTM E 595. The data will show an insignificant effect on the CVCMs and TMLs after exposure to various dosages of gamma radiation. This data may favorably impact new applications for these silicone materials for use as an improved sealant for space solar cell systems, space structures, satellite systems and aerospace systems.
[1]
C. G. Delides.
The protective effect of phenyl group on the crosslinking of irradiated dimethyldiphenylsiloxane
,
1980
.
[2]
Brian M. Flusche,et al.
Radiation resistance of electro-optic polymer-based modulators
,
2005
.
[3]
Aaron Snyder,et al.
Modeling of transmittance degradation caused by optical surface contamination by atomic oxygen reaction with adsorbed silicones
,
2000,
SPIE Optics + Photonics.
[4]
John Weir,et al.
Space radiation resistant hybrid and polymer materials for solar cells
,
2010,
2010 35th IEEE Photovoltaic Specialists Conference.
[5]
Roy Johnson,et al.
Uniquely Customized Ultra-Low-Outgassing Silicones to Reduce Contamination
,
2011
.