Hot workability of titanium and titanium aluminide alloys—an overview

[1]  S. Semiatin,et al.  Plastic-flow and microstructure evolution during hot deformation of a gamma titanium aluminide alloy , 1997 .

[2]  S. Semiatin,et al.  A criterion for intergranular failure during hot working of a near-gamma titanium aluminide alloy , 1997 .

[3]  S. Semiatin,et al.  High-temperature deformation and failure of an orthorhombic titanium aluminide sheet material , 1996 .

[4]  S. Semiatin,et al.  Simulation of the hot-tension test under cavitating conditions , 1996 .

[5]  M. Dao,et al.  Deformation and fracture under compressive loading in lamellar TiAl microstructures , 1996 .

[6]  S. Semiatin,et al.  Influence of temperature transients on the hot workability of a two-phase gamma titanium aluminide alloy , 1996 .

[7]  S. Semiatin,et al.  Workability of a gamma titanium aluminide alloy during equal channel angular extrusion , 1995 .

[8]  M. Nakamura,et al.  High temperature mechanical properties of vanadium alloyed γ base titanium-aluminides , 1994 .

[9]  D. Eylon,et al.  Hot Ductility of Titanium Alloys–A Comparison with Carbon Steels– , 1993 .

[10]  Robert J. Asaro,et al.  On the deformation mechanisms in lamellar TiAl alloys , 1993 .

[11]  K. Ameyama,et al.  Superplasticity in TiAl and Ti3Al Two Phase Material Made from PREPed Powder , 1993 .

[12]  S. L. Semiatin,et al.  Effect of hydrostatic pressure , 1992, Metallurgical and Materials Transactions A.

[13]  J. Wolfenstine,et al.  Superplastic behavior of two-phase titanium aluminides , 1992 .

[14]  R. Imayev,et al.  Mechanical behaviour of fine grained TiAl intermetallic compound—I. Superplasticity , 1992 .

[15]  Yoshio Ashida,et al.  Isothermal Forging of TiAl-based Intermetallic Compounds. , 1991 .

[16]  T. Tsujimoto,et al.  Influence of Alloy Composition on Hot Deformation Properties of Ti-Al Binary Intermetallics , 1991 .

[17]  T. Hanamura,et al.  High Temperature Deformation Behavior of Titanium-Aluminide Based Gamma Plus Beta Microduplex Alloy. , 1991 .

[18]  S. Semiatin,et al.  Understanding the failure of near-gamma titanium aluminides during rolling , 1990 .

[19]  M. Suery,et al.  Effect of strain rate sensitivity and cavity growth rate on failure of superplastic material , 1986 .

[20]  H. Fujii,et al.  Hot Workability of Ti-6Al-4V Alloys , 1986 .

[21]  S. Semiatin,et al.  The effect of shear bands on service properties of ti-6ai-2sn-4zr-2mo-0.1si forgings , 1983 .

[22]  S. Semiatin,et al.  The occurrence of shear bands in isothermal, hot forging , 1982 .

[23]  P. Dadras,et al.  Characterization and modeling for forging deformation of Ti-6Ai-2Sn-4Zr-2Mo-0.1 Si , 1981 .

[24]  S. Semiatin,et al.  Deformation and unstable flow in hot forging of Ti-6Ai-2Sn-4Zr-2Mo-0.1Si , 1981 .

[25]  G. D. Lahoti,et al.  The Forging of Metals , 1981 .

[26]  M. Stowell.  Cavity growth in superplastic alloys , 1980 .

[27]  Michael F. Ashby,et al.  Intergranular fracture during power-law creep , 1979 .

[28]  Amit K. Ghosh,et al.  Mechanical behavior and hardening characteristics of a superplastic Ti-6AI-4V alloy , 1979 .

[29]  N. Ridley,et al.  Superplastic deformation, cavitation, and fracture of microduplex Cu-Ni-Zn alloys , 1978 .

[30]  Amit K. Ghosh.  Tensile instability and necking in materials with strain hardening and strain-rate hardening , 1977 .

[31]  Amit K. Ghosh,et al.  On reported anomalies in relating strain-rate sensitivity(m) to ductility , 1976 .

[32]  J. Hancock.  Creep cavitation without a vacancy flux , 1976 .

[33]  H. Müllner,et al.  Amplitude dependence of the internal friction in copper after annealing at low oxygen pressure , 1976 .

[34]  H. A. Kuhn,et al.  A Fracture Criterion for Cold Forming , 1973 .

[35]  H. Kuhn,et al.  Fracture in cold upset forging -a criterion and model , 1973 .

[36]  Y-W. Kim,et al.  Microstructure/property relationships in titanium aluminides and alloys , 1990 .

[37]  T. Tsujimoto,et al.  Development of a Hot Working Simulator and Application to TiAl Intermetallic Compounds , 1989 .

[38]  K. Hashimoto,et al.  Deformation of TiAl Intermetallic Compound at Elevated Temperatures , 1986 .

[39]  George Ellwood Dieter,et al.  Workability testing techniques , 1984 .

[40]  S. Semiatin,et al.  The occurrence of shear bands in nonisothermal, hot forging of Ti-6AI-2Sn-4Zr-2Mo-0.1Si , 1983 .

[41]  A. M. Sabroff,et al.  FORGING MATERIALS AND PRACTICES. , 1968 .