Numerical simulation of heat transfer of two-phase flow in mini-channel heat sink and investigation the effect of pin-fin shape on flow maldistribution

[1]  Jinxin Zhang,et al.  Design of a mini-channel heat sink for high-heat-flux electronic devices , 2022, Applied Thermal Engineering.

[2]  Mohammad Hosein Fakhar,et al.  Nanotechnology efficacy on improvement of acute velocity in fluid-conveyed pipes under thermal load , 2021, International Journal of Hydromechatronics.

[3]  H. Nemati,et al.  Shape optimisation of wavy mini-channel heat sink , 2021 .

[4]  Zhichun Liu,et al.  Conjugate heat transfer enhancement in the mini-channel heat sink by realizing the optimized flow pattern , 2021 .

[5]  Y. Chen,et al.  Pressure drop and heat transfer performance of microchannel heat exchanger with different reentrant cavities , 2020 .

[6]  Jian Wu,et al.  Numerical investigation of laminar flow and heat transfer in a liquid metal cooled mini-channel heat sink , 2020 .

[7]  Xiao-dong Shao,et al.  An experimental and numerical investigation of heat transfer enhancement in annular microchannel heat sinks , 2019, International Journal of Thermal Sciences.

[8]  Sung-min Kim,et al.  Enhanced flow uniformity in parallel mini-channels with pin-finned inlet header , 2019, Applied Thermal Engineering.

[9]  M. Afrand,et al.  Comparison of the effect of five different entrance channel shapes of a micro-channel heat sink in forced convection with application to cooling a supercomputer circuit board , 2019, Applied Thermal Engineering.

[10]  Lei Chai,et al.  Thermohydraulic performance of microchannel heat sinks with triangular ribs on sidewalls – Part 2: Average fluid flow and heat transfer characteristics , 2018, International Journal of Heat and Mass Transfer.

[11]  M. Hajmohammadi,et al.  Microfluidic effects on the heat transfer enhancement and optimal design of microchannels heat sinks , 2018, International Journal of Heat and Mass Transfer.

[12]  Maziar Arjomandi,et al.  Thermal performance analysis of a microchannel heat sink cooling with copper oxide-indium (CuO/In) nano-suspensions at high-temperatures , 2018, Applied Thermal Engineering.

[13]  R. Rafee,et al.  Geometric optimization of an enhanced microchannel heat sink with superhydrophobic walls , 2018 .

[14]  Jer-Huan Jang,et al.  The heat transfer characteristics of liquid cooling heat sink with micro pin fins , 2017 .

[15]  Jiyun Zhao,et al.  Performance improvements of microchannel heat sink using wavy channel and nanofluids , 2015 .

[16]  Mohammad Mehdi Rashidi,et al.  Two phase simulation of natural convection and mixed convection of the nanofluid in a square cavity , 2015 .

[17]  H. I. Schlaberg,et al.  Experimental and numerical study of natural convection in a square enclosure filled with nanofluid , 2014 .

[18]  Nicolas Galanis,et al.  Experimental investigation of CuO–water nanofluid flow and heat transfer inside a microchannel heat sink , 2014 .

[19]  Hillal M. Elshehabey,et al.  Numerical investigation for natural convection of a nanofluid in an inclined L-shaped cavity in the presence of an inclined magnetic field , 2014 .

[20]  Baomin Dai,et al.  Investigation on convective heat transfer characteristics of single phase liquid flow in multi-port micro-channel tubes , 2014 .

[21]  H. Togun,et al.  A 3D numerical study of heat transfer in a single-phase micro-channel heat sink using graphene, aluminum and silicon as substrates , 2013 .

[22]  M. N. Labib,et al.  Numerical investigation on effect of base fluids and hybrid nanofluid in forced convective heat transfer , 2013 .

[23]  R. Laur,et al.  Numerical study of two phase laminar mixed convection nanofluid in elliptic ducts , 2011 .

[24]  Vincenzo Bianco,et al.  Enhancement of heat transfer and entropy generation analysis of nanofluids turbulent convection flow in square section tubes , 2011, Nanoscale research letters.

[25]  Xin-gang Liang,et al.  Experiments on the transient heat transfer of minichannel heat sink under high heat flux density in an enclosed loop , 2010 .

[26]  Teng Wang,et al.  A Study of Effects of Coolants on Heat Transfer Capability of On-chip Cooling with CNT Micro-fin Architectures by Using CFD Simulation , 2007, 2007 International Symposium on High Density packaging and Microsystem Integration.

[27]  G. Peterson,et al.  The effect of thermofluid and geometrical parameters on convection of liquids through rectangular microchannels , 1995 .

[28]  R. Pease,et al.  High-performance heat sinking for VLSI , 1981, IEEE Electron Device Letters.

[29]  S. Nada,et al.  Enhancing the thermal performance of different flow configuration minichannel heat sink using Al2O3 and CuO-water nanofluids for electronic cooling: An experimental assessment , 2022, International Journal of Thermal Sciences.

[30]  S. Kandlikar,et al.  Cooling of Microelectronic Devices Packaged in a Single Chip Module Using Single Phase Refrigerant R-123 , 2009 .