Discontinuous grain growth in recrystallised vein quartz — implications for grain boundary structure, grain boundary mobility, crystallographic preferred orientation, and stress history

Abstract Grain growth is a process driven by the reduction of interfacial free energy, leading to an increase in grain size and a reduction of the number of grains in a given volume of a single phase polycrystalline material. Discontinuous grain growth (DCGG), as opposed to normal grain growth (NGG) involves just a few grains (blasts) growing at the expense of a matrix, that itself undergoes much slower modification in grain size, hence producing a bimodal grain size distribution as a transient state prior to impingement of the blasts. Such a transient state has been found in a quartz layer in metamorphic rocks of the Sesia Zone, Western Alps. There, large strain-free quartz grains occur that reveal concave outward grain boundaries against a matrix of small grains with a pronounced crystallographic and a weak dimensional preferred orientation. The misorientation of the blasts with respect to the matrix grains systematically exceeds 30°. This finding suggests that the mobility of high-angle grain boundaries in a natural quartzite depends on the degree of their misorientation (among other factors), as known for metals and alloys. The width of the grain boundaries must be sufficiently small to allow for this effect. DCGG is promoted by a pronounced crystallographic preferred orientation (CPO), that leaves only a few grain boundaries with sufficient misorientation to be mobile. In contrast to NGG, DCGG wipes out any pre-existing CPO and information on activated glide systems or kinematics during the preceding stage of flow is lost after DCGG has gone to completion. A complementary new CPO could even develop, that could be difficult to interpret. With respect to tectonic history, interfacial free energy driven grain growth reflects a period of low stress annealing and thus constitutes a first order signal.

[1]  G. Lloyd,et al.  SEM electron channelling analysis of dynamic recrystallization in a quartz grain , 1991 .

[2]  F. Haessner.  Recrystallization of metallic materials , 1978 .

[3]  Jan Tullis,et al.  Grain Growth Kinetics of Quartz and Calcite Aggregates , 1982, The Journal of Geology.

[4]  P. Beck.  Annealing of cold worked metals , 1954 .

[5]  Gerhard Voll.  Zur Frage des Stofftransports auf den Korngrenzen metamorpher Gesteine , 1962 .

[6]  D. Avigad.  Pre-collisional ductile extension in the internal western Alps (Sesia zone, Italy) , 1996 .

[7]  R. Twiss.  Theory and applicability of a recrystallized grain size paleopiezometer , 1977 .

[8]  A. Nicolas,et al.  Fabric asymmetry and shear sense in movement zones , 1983 .

[9]  B. Hobbs.  22 – The Geological Significance of Microfabric Analysis , 1985 .

[10]  P. Feltham,et al.  Grain growth in metals , 1957 .

[11]  S. Karato.  Grain growth kinetics in olivine aggregates , 1989 .

[12]  J. E. Burke,et al.  RECRYSTALLIZATION AND GRAIN GROWTH , 1952 .

[13]  D. Olgaard,et al.  Experimental deformation of fine‐grained anhydrite: Evidence for dislocation and diffusion creep , 1995 .

[14]  D. Powell.  Experimental and Natural Rock Deformation , 1972, Mineralogical Magazine.

[15]  B. Sander.  Einführung in die Gefügekunde der geologischen Körper , 1948 .

[16]  R. Law,et al.  Crystallographic fabrics: a selective review of their applications to research in structural geology , 1990, Geological Society, London, Special Publications.

[17]  G. Lister,et al.  S-C Mylonites , 1984 .

[18]  H. Wenk.  Preferred orientation in deformed metals and rocks : an introduction to modern texture analysis , 1985 .

[19]  W. D. Kingery,et al.  Introduction to Ceramics , 1976 .

[20]  Robert Williams.  Space-Filling Polyhedron: Its Relation to Aggregates of Soap Bubbles, Plant Cells, and Metal Crystallites , 1968, Science.

[21]  B. Evans,et al.  Grain growth in synthetic marbles with added mica and water , 1988 .

[22]  J. Renner,et al.  Microstructures of synthetic polycrystalline coesite aggregates. The effect of pressure, temperature, and time , 1997 .

[23]  Renée Heilbronner,et al.  Integrated spatial and orientation analysis of quartz c-axes by computer-aided microscopy , 1993 .

[24]  P. Cotterill,et al.  Recrystallization and grain growth in metals , 1975 .

[25]  G. Voll,et al.  New work on petrofabrics , 1961 .

[26]  G. Price.  18 – Preferred Orientations in Quartzites , 1985 .

[27]  Cyril Stanley Smith,et al.  SOME ELEMENTARY PRINCIPLES OF POLYCRYSTALLINE MICROSTRUCTURE , 1964 .

[28]  B. Sander.  Einführung in die Gefügekunde der geologischen Körper. In zwei Teilen. 2. Teil: Die Korngefüge. Springer-Verlag. Wien und Innsbruck 1950. XII + 409 s., 153 fig., 166 Gefüge-diagram, 8 pl., därav 4 i färgtryck. Pris $ 15: 30 , 1951 .

[29]  D. Griggs,et al.  Syntectonic and Annealing Recrystallization of Fine-Grained Quartz Aggregates , 1970 .

[30]  S. Schmid,et al.  An evaluation of criteria to deduce the sense of movement in sheared rocks , 1983 .

[31]  W. D. Means.  The concept of steady-state foliation , 1981 .