论文信息 - Digital light processing 3D printing of porous ceramics based on multi-materials additive manufacturing - 字舞流文

Digital light processing 3D printing of porous ceramics based on multi-materials additive manufacturing

Xiaodong Liu | Wenyan Duan | Bingshan Liu | Gong Wang | Yue Gu | Congmin Lv

[1] Yong Chen,et al. In-situ transfer vat photopolymerization for transparent microfluidic device fabrication , 2022, Nature communications.

[2] T. Graule,et al. Effects of the Layer Height and Exposure Energy on the Lateral Resolution of Zirconia Parts Printed by Lithography-Based Additive Manufacturing , 2020, Materials.

[3] Jimin Chen,et al. Fine lattice structural titanium dioxide ceramic produced by DLP 3D printing , 2019 .

[4] Haidong Wu,et al. Cure behavior of colorful ZrO2 suspensions during Digital light processing (DLP) based stereolithography process , 2019 .

[5] Haidong Wu,et al. Fabrication and properties of a high porosity h-BN–SiO2 ceramics fabricated by stereolithography-based 3D printing , 2019, Materials Letters.

[6] P. Wilson,et al. Porous ceramics with a duplex pore structure by compression molding of alumina-NaCl paste in molten sucrose , 2017 .

[7] L. Bergström,et al. Structuring adsorbents and catalysts by processing of porous powders , 2014 .

[8] J. Halloran,et al. Depth and width of cured lines in photopolymerizable ceramic suspensions , 2013 .

[9] Nicholas X. Fang,et al. Projection micro-stereolithography using digital micro-mirror dynamic mask , 2005 .

[10] L. Xiaoli. Research Progress on Preparation of Porous Ceramics , 2013 .