Conversion of agro-industrial wastes of sorghum bagasse and molasses into lightweight roof tile composite

[1]  B. Sithole,et al.  Beneficiation of wood sawdust into cellulose nanocrystals for application as a bio-binder in the manufacture of particleboard , 2021, Biomass Conversion and Biorefinery.

[2]  Byung‐Dae Park,et al.  Modification of nanoclay with different methods and its application in urea-formaldehyde bonded plywood panels , 2021, Wood Material Science & Engineering.

[3]  Byung‐Dae Park,et al.  Modification of Oxidized Starch Polymer with Nanoclay for Enhanced Adhesion and Free Formaldehyde Emission of Plywood , 2021, Journal of Polymers and the Environment.

[4]  M. Arshad,et al.  Biotechnological applications of sugarcane bagasse and sugar beet molasses , 2020, Biomass Conversion and Biorefinery.

[5]  Tzung-Han Chou,et al.  Preparation and evaluation of particleboard from insect rearing residue and rice husks using starch/citric acid mixture as a natural binder , 2020, Biomass Conversion and Biorefinery.

[6]  Yopi,et al.  Sequential production of ligninolytic, xylanolytic, and cellulolytic enzymes by Trametes hirsuta AA-017 under different biomass of Indonesian sorghum accessions-induced cultures , 2020 .

[7]  Shireen Quereshi,et al.  Residual sugarcane bagasse conversion in India: current status, technologies, and policies , 2020, Biomass Conversion and Biorefinery.

[8]  Byung‐Dae Park,et al.  Tuning of adhesion and disintegration of oxidized starch adhesives for the recycling of medium density fiberboard , 2020 .

[9]  Jianquan Luo,et al.  Catalytic production of 5-hydroxymethylfurfural from sucrose and molasses by aluminum chloride in green aqueous γ-valerolactone system , 2020, Biomass Conversion and Biorefinery.

[10]  Zhongyuan Zhao,et al.  Further Exploration of Sucrose-Citric Acid Adhesive: Synthesis and Application on Plywood , 2019, Polymers.

[11]  C. Mbohwa,et al.  Value addition of coal fines and sawdust to briquettes using molasses as a binder , 2018, South African Journal of Chemical Engineering.

[12]  W. Xu,et al.  A Novel Eco-Friendly Wood Adhesive Composed by Sucrose and Ammonium Dihydrogen Phosphate , 2018, Polymers.

[13]  K. Umemura,et al.  Manufacture and Properties of Citric Acid-Bonded Composite Board made from Salacca Frond: Effects of Maltodextrin Addition, Pressing Temperature, and Pressing Method , 2018, BioResources.

[14]  G. Zeng,et al.  Production of fuel pellets via hydrothermal carbonization of food waste using molasses as a binder. , 2018, Waste management.

[15]  L. Suryanegara,et al.  Properties of Particleboard Made from Wood Waste with Various Size , 2018, IOP Conference Series: Earth and Environmental Science.

[16]  L. Tabil,et al.  Carbohydrates as binders in biomass densification for biochemical and thermochemical processes , 2017 .

[17]  T. Yoshimura,et al.  Utilization of sweet sorghum bagasse and citric acid for manufacturing of particleboard II: influences of pressing temperature and time on particleboard properties , 2017, Journal of Wood Science.

[18]  R. Battistelle,et al.  Physical and Mechanical Characterization of Sugarcane Bagasse Particleboards for Civil Construction , 2016 .

[19]  Z. Cai,et al.  Effect of the Particle Geometry and Adhesive Mass Percentage on the Physical and Mechanical Properties of Particleboard made from Peanut Hull , 2016 .

[20]  Koichi Yoshioka,et al.  Utilization of sweet sorghum bagasse and citric acid for manufacturing of particleboard I: Effects of pre-drying treatment and citric acid content on the board properties , 2016 .

[21]  S. R. Farrokhpayam,et al.  Thin particleboard quality: effect of particle size on the properties of the panel , 2016, Journal of the Indian Academy of Wood Science.

[22]  Yingcheng Hu,et al.  Novel Particleboard Composites Made from Coir Fiber and Waste Banana Stem Fiber , 2016 .

[23]  Pusit Lertwattanaruk,et al.  Properties of natural fiber cement materials containing coconut coir and oil palm fibers for residential building applications. , 2015 .

[24]  A. Ashori,et al.  Suitability of sorghum stalk fibers for production of particleboard. , 2015, Carbohydrate polymers.

[25]  Jianguo Wu,et al.  Sustainable resource opportunity for cane molasses: use of cane molasses as a grinding aid in the production of Portland cement , 2015 .

[26]  K. Umemura,et al.  Investigation of a new natural adhesive composed of citric acid and sucrose for particleboard II: effects of board density and pressing temperature , 2014, Journal of Wood Science.

[27]  Zhongyuan Zhao,et al.  Investigation of a new natural particleboard adhesive composed of tannin and sucrose , 2014, Journal of Wood Science.

[28]  Sanjay Sharma,et al.  Composites from waste for civil engineering applications , 2013 .

[29]  Masatoshi Sato,et al.  Influence of Chemical Components of Oil Palm on Properties of Binderless Particleboard , 2013 .

[30]  K. Umemura,et al.  Investigation of a new natural adhesive composed of citric acid and sucrose for particleboard , 2013, Journal of Wood Science.

[31]  S. Rahim,et al.  Properties of particleboard made from kenaf (Hibiscus cannabinus L.) as function of particle geometry , 2012 .

[32]  S. Medved,et al.  Impact of Resin Content on Swelling Pressure of Three Layer Particleboard Bonded with Urea-Formaldehyde Adhesive , 2011 .

[33]  Masatoshi Sato,et al.  Effect of particle geometry on the properties of binderless particleboard manufactured from oil palm trunk , 2010 .

[34]  Y. Matsumura,et al.  Formation of Tarry Material from 5-HMF in Subcritical and Supercritical Water , 2009 .

[35]  Holmer Savastano,et al.  Evaluation of mechanical, physical and thermal performance of cement-based tiles reinforced with vegetable fibers , 2008 .

[36]  R. K. Morchhale,et al.  Plant Fiber — Industrial Waste Reinforced Polymer Composites as a Potential Wood Substitute Material , 2008 .

[37]  R. Holze,et al.  In situ UV–vis- and FT-IR-spectroscopy of electrochemically synthesized furan–thiophene copolymers , 2007 .

[38]  Gökay Nemli,et al.  Evaluation of some of the properties of particleboard as function of manufacturing parameters , 2007 .

[39]  L. Avérous,et al.  Biocomposites based on plasticized starch: thermal and mechanical behaviours , 2004 .

[40]  Martin P. Ansell,et al.  Image analysis and bending properties of model OSB panels as a function of strand distribution, shape and size , 2004, Wood Science and Technology.