Enhancing the performance of strip and 180-deg slot waveguide bends for integrated optical waveguide modulator

Abstract. Waveguide bends are essential structures for designing an integrated optical waveguide modulator (IOWM). However, reducing bending loss for strip and slot waveguide bends and obtaining a small increment of footprint size by bending the radius are challenging issues. We aim to evaluate whether using strip waveguides with an adiabatic bend reduces the bending loss and to obtain a specific length suitable for a V-shaped mode converter with a small increment of footprint size in the IOWM. Furthermore, a new 180-deg-bend structure for slot waveguides, to reduce bending loss, is investigated. The results of reducing bending radius (R) with a large coverage angle (αc) for strip waveguide bends revealed a low bending loss and simultaneously a reduction of the footprint size in the IOWM. For the 180-deg slot waveguide bend, both the bending and coupling losses were reduced by optimizing the taper and distance offset, which enhanced transmission power efficiency. We validated the feasibility and efficiency of the proposed bending strip and slot structures in IOWM, which is important for integrated optical applications.

[1]  Y. Vlasov,et al.  Losses in single-mode silicon-on-insulator strip waveguides and bends. , 2004, Optics express.

[2]  A. Orlandi,et al.  Feature selective validation (FSV) for validation of computational electromagnetics (CEM). part II- assessment of FSV performance , 2006, IEEE Transactions on Electromagnetic Compatibility.

[3]  A. Orlandi,et al.  Feature selective validation (FSV) for validation of computational electromagnetics (CEM). part I-the FSV method , 2006, IEEE Transactions on Electromagnetic Compatibility.

[4]  Ferran Silva,et al.  Numerical Validation Methods , 2011 .

[5]  D. Van Thourhout,et al.  Silicon-on-Insulator Spectral Filters Fabricated With CMOS Technology , 2010, IEEE Journal of Selected Topics in Quantum Electronics.

[6]  Stuart A. Kingsley,et al.  Advanced materials and device technology for photonic electric field sensors , 2012, Other Conferences.

[7]  Fei Wang,et al.  UV Curable Electro-Optic Polymer Switch Based on Direct Photodefinition Technique , 2011, IEEE Journal of Quantum Electronics.

[8]  Fang Liu,et al.  Experimental demonstration of silicon slot waveguide with low transmission loss at 1064 nm , 2014 .

[9]  W. Bogaerts,et al.  Compact Single-Mode Silicon Hybrid Rib/Strip Waveguide With Adiabatic Bends , 2011, IEEE Photonics Journal.

[10]  Larry R. Dalton,et al.  Nonlinear polymer-clad silicon slot waveguide modulator with a half wave voltage of 0.25 V , 2008 .

[11]  Vishnu Priye,et al.  Efficient design of silicon slot waveguide optical modulator , 2017 .

[12]  Yuhei Ishizaka,et al.  Transmission-Efficient Structures of Bent and Crossing Silicon Slot Waveguides , 2013, IEEE Photonics Journal.

[13]  Edward Van Keuren,et al.  Right-angle slot waveguide bends with high bending efficiency. , 2008, Optics express.

[14]  Antonio Orlandi,et al.  Review of the Feature Selective Validation Method (FSV). Part I—Theory , 2018, IEEE Transactions on Electromagnetic Compatibility.

[15]  Frederic Boeuf,et al.  Benchmarking Si, SiGe, and III–V/Si Hybrid SIS Optical Modulators for Datacenter Applications , 2017, Journal of Lightwave Technology.

[16]  F. Utreras.  Natural spline functions, their associated eigenvalue problem , 1983 .

[17]  David J. Thomson,et al.  Silicon optical modulators , 2010 .

[18]  Jacob B Khurgin,et al.  Highly linear heterogeneous-integrated Mach-Zehnder interferometer modulators on Si. , 2016, Optics express.

[19]  Ray T. Chen,et al.  Highly efficient mode converter for coupling light into wide slot photonic crystal waveguide. , 2014, Optics express.

[20]  Guo-Qiang Lo,et al.  Highly sensitive Mach–Zehnder interferometer biosensor based on silicon nitride slot waveguide , 2013 .

[21]  M. Soljačić,et al.  Roughness losses and volume-current methods in photonic-crystal waveguides , 2005 .

[22]  Mario Martinelli,et al.  Design of curved waveguides: the matched bend. , 2003, Journal of the Optical Society of America. A, Optics, image science, and vision.

[23]  Ya Yan Lu,et al.  Computing Optimal Waveguide Bends With Constant Width , 2007, Journal of Lightwave Technology.

[24]  Musab A. M. Al-Tarawni,et al.  Optimizing an integrated waveguide modulator for sensitive low-frequency alternating-current electric-field sensors , 2017 .

[25]  R A Norwood,et al.  High Deltan strip-loaded electro-optic polymer waveguide modulator with low insertion loss. , 2009, Optics express.

[26]  D. Van Thourhout,et al.  Compact Wavelength-Selective Functions in Silicon-on-Insulator Photonic Wires , 2006, IEEE Journal of Selected Topics in Quantum Electronics.

[27]  Musab A. M. Al-Tarawni,et al.  Design segmented slot waveguide for integrated waveguide modulator , 2016, 2016 IEEE International Conference on Semiconductor Electronics (ICSE).

[28]  Musab A. M. Al-Tarawni,et al.  Optimizing low half-wave voltage electro-optic polymer modulator for optical waveguide sensor , 2017 .

[29]  Jean-Pierre Berenger,et al.  A perfectly matched layer for the absorption of electromagnetic waves , 1994 .

[30]  Ai Yang Yi.  Improvement of integrated electric field sensor based on hybrid segmented slot waveguide , 2017 .

[31]  C. Koos,et al.  Ideal Bend Contour Trajectories for Single-Mode Operation of Low-Loss Overmoded Waveguides , 2007, IEEE Photonics Technology Letters.

[32]  M. Lipson,et al.  High confinement in silicon slot waveguides with sharp bends. , 2006, Optics express.

[33]  J. Leuthold,et al.  Low Power Mach–Zehnder Modulator in Silicon-Organic Hybrid Technology , 2013, IEEE Photonics Technology Letters.

[34]  Vien Van,et al.  Optical Microring Resonators : Theory, Techniques, and Applications , 2016 .

[35]  Anand Gopinath,et al.  Vector analysis of optical dielectric waveguide bends using finite-difference method , 1996 .