Influence of prior cold rolling reduction on microstructure and mechanical properties of a reversion annealed high-Mn austenitic steel

[1]  P. Behjati,et al.  An investigation on microstructure and mechanical propertiesof a Nb-microalloyed nano/ultrafine grained 201 austenitic stainless steel , 2015 .

[2]  D. Santos,et al.  Martensite reversion and texture formation in 17Mn-0.06C TRIP/TWIP steel after hot cold rolling and annealing , 2015 .

[3]  P. Behjati,et al.  Influence of precooling and deformation temperature on microstructure and mechanical properties in a high-manganese austenitic steel , 2014 .

[4]  M. C. Chen,et al.  Enhanced Strength and Ductility in an Ultrafine-Grained Fe-22Mn-0.6C Austenitic Steel Having Fully Recrystallized Structure , 2014, Metallurgical and Materials Transactions A.

[5]  B. R. Ravi Kumar,et al.  Recrystallization Behavior of a Heavily Deformed Austenitic Stainless Steel During Iterative Type Annealing , 2014, Metallurgical and Materials Transactions A.

[6]  A. Kermanpur,et al.  Investigation of the effect of grain size on the strain-induced martensitic transformation in a high-Mn stainless steel using nanoindentation , 2014 .

[7]  P. Behjati,et al.  Enhanced mechanical properties in a high-manganese austenitic steel through formation of nano grains, nanotwinned austenite grains, nano carbides and TRIP , 2014 .

[8]  P. Behjati,et al.  Effect of annealing temperature on nano/ultrafine grain of Ni-free austenitic stainless steel , 2014 .

[9]  L. P. Karjalainen,et al.  Phase reversion induced nanograined austenitic stainless steels: microstructure, reversion and deformation mechanisms , 2013 .

[10]  A. Weidner,et al.  Ultrafine grained high-alloyed austenitic TRIP steel , 2013 .

[11]  N. Tsuji,et al.  Fully recrystallized nanostructure fabricated without severe plastic deformation in high-Mn austenitic steel , 2013 .

[12]  P. Behjati,et al.  Application of Martensitic Transformation Fundamentals to Select Appropriate Alloys for Grain Refining Through Martensite Thermomechanical Treatment , 2013, Metallurgical and Materials Transactions A.

[13]  L. P. Karjalainen,et al.  Effect of Niobium on Static Recrystallization Characteristics of TWIP Steels , 2013 .

[14]  M. Koyama,et al.  Effect of deformation temperature on tensile properties in a pre-cooled Fe–Mn–C austenitic steel , 2012 .

[15]  Young-Soo Chun,et al.  Role of ɛ martensite in tensile properties and hydrogen degradation of high-Mn steels , 2012 .

[16]  A. Kermanpur,et al.  Effect of reversion annealing on the formation of nano/ultrafine grained structure in 201 austenitic stainless steel , 2011 .

[17]  G. Gottstein,et al.  Recrystallization kinetics and microstructure evolution during annealing of a cold-rolled Fe–Mn–C alloy , 2011 .

[18]  L. P. Karjalainen,et al.  Nanograined/Ultrafine-Grained Structure and Tensile Deformation Behavior of Shear Phase Reversion-Induced 301 Austenitic Stainless Steel , 2010 .

[19]  G. Gottstein,et al.  Effect of deformation and annealing on the formation and reversion of ε-martensite in an Fe–Mn–C alloy , 2010 .

[20]  Singon Kang,et al.  Effects of recrystallization annealing temperature on carbide precipitation, microstructure, and mechanical properties in Fe-18Mn-0.6C-1.5Al TWIP steel , 2010 .

[21]  L. P. Karjalainen,et al.  Kinetics of Recrystallization and Grain Growth of Cold Rolled TWIP Steel , 2010 .

[22]  A. Kermanpur,et al.  Effect of strain-induced martensite on the formation of nanocrystalline 316L stainless steel after cold rolling and annealing , 2009 .

[23]  Kyung-Tae Park,et al.  Factors influencing the tensile behavior of a Fe–28Mn–9Al–0.8C steel , 2009 .

[24]  D. Suh,et al.  Microstructure and Mechanical Behaviors of 0.1C-13Mn Metastable Austenitic Steel , 2009 .

[25]  L. P. Karjalainen,et al.  Enhanced Mechanical Properties through Reversion in Metastable Austenitic Stainless Steels , 2009 .

[26]  N. Tsuji,et al.  Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure , 2008 .

[27]  L. P. Karjalainen,et al.  Kinetics of the γ → ε Martensitic Transformation in Fine-Grained Fe-26Mn-0.14C Austenitic Steel , 2008 .

[28]  M. Odén,et al.  Elastic strain evolution and ε-martensite formation in individual austenite grains during in situ loading of a metastable stainless steel , 2008 .

[29]  L. Kestens,et al.  Recrystallization Behaviour of an Austenitic High Mn Steel , 2007 .

[30]  L. P. Karjalainen,et al.  Hall–Petch Behavior in Ultra-Fine-Grained AISI 301LN Stainless Steel , 2007 .

[31]  D. Matlock,et al.  Deformation-induced phase transformation and strain hardening in type 304 austenitic stainless steel , 2006 .

[32]  D. Matlock,et al.  Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction , 2004 .

[33]  S. Baik,et al.  Effects of amount of ε martensite, carbon content and cold working on damping capacity of an Fe–17% Mn martensitic alloy , 2003 .

[34]  A. F. Padilha,et al.  Annealing of cold-worked austenitic stainless steels , 2003 .

[35]  S. Tavares,et al.  X-ray diffraction and magnetic analysis of deformation induced martensites in a Fe-17Mn-1.9Al-0.1C steel , 2002 .

[36]  Y. Bréchet,et al.  Recovery of AlMg alloys: Flow stress and strain-hardening properties , 1998 .

[37]  S. Takaki,et al.  Effect of Pre-cold-working on Diffusional Reversion of Deformation Induced Martensite in Metastable Austenitic Stainless Steel , 1994 .

[38]  S. Takaki,et al.  Reversion Mechanism from Deformation Induced Martensite to Austenite in Metastable Austenitic Stainless Steels. , 1991 .

[39]  S. Takaki,et al.  Optimal Chemical Composition in Fe-Cr-Ni Alloys for Ultra Grain Refining by Reversion from Deformation Induced Martensite. , 1991 .

[40]  A. Sato,et al.  Hardening due to pre-existing ϵ-Martensite in an Fe-30Mn-1Si alloy single crystal , 1982 .

[41]  M. Dickson.  The significance of texture parameters in phase analysis by X‐ray diffraction , 1969 .

[42]  B. Cullity,et al.  Elements of X-ray diffraction , 1957 .

[43]  L. P. Karjalainen,et al.  On the Significance of Nature of Strain-Induced Martensite on Phase-Reversion-Induced Nanograined/Ultrafine-Grained Austenitic Stainless Steel , 2009 .

[44]  S. Hwang,et al.  Fe-Mn Alloys for Cryogenic Use: A Brief Survey of Current Research , 1978 .